Fix escaping of Jekyll titles.

Reformat zsh options as upper case.

.gitignore

@@ -1,4 +1,5 @@
 installed-prefs
+.installed-prefs
 *.swp
 *~
 *.bak

.gitmodules

@@ -0,0 +1,31 @@
+[submodule "dotfiles/vim/pack/matir/opt/solarized8"]
+	path = dotfiles/vim/pack/matir/opt/solarized8
+	url = https://github.com/lifepillar/vim-solarized8.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/surround"]
+	path = dotfiles/vim/pack/matir/start/surround
+	url = https://github.com/tpope/vim-surround.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/editorconfig"]
+	path = dotfiles/vim/pack/matir/start/editorconfig
+	url = https://github.com/editorconfig/editorconfig-vim.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/fugitive"]
+	path = dotfiles/vim/pack/matir/start/fugitive
+	url = https://github.com/tpope/vim-fugitive
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/ctrlp"]
+	path = dotfiles/vim/pack/matir/start/ctrlp
+	url = https://github.com/ctrlpvim/ctrlp.vim.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/vim-go"]
+	path = dotfiles/vim/pack/matir/start/vim-go
+	url = https://github.com/fatih/vim-go.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/tmux/tmux-logging"]
+	path = dotfiles/tmux/tmux-logging
+	url = https://github.com/tmux-plugins/tmux-logging.git
+	fetchRecurseSubmodules = true
+[submodule "dotfiles/vim/pack/matir/start/syntastic"]
+	path = dotfiles/vim/pack/matir/start/syntastic
+	url = https://github.com/vim-syntastic/syntastic.git

README.md

@@ -31,3 +31,9 @@ INSTALL_PKGS: Install common packages, if on a Debian-like system.
   (Defaults to opposite of $MINIMAL.)
 SAVE: Save the install options to ${BASEDIR}/installed-prefs
 ```
+### TODO ###
+
+[ ] Re-do the installation of packages.
+  [ ] Make manual installation of sets easy/possible.
+  [ ] Make missing packages not cause a full set failure.
+  [X] Allow comments and blank lines.

bin/_install_apt_proxy.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+set -o errexit
+set -o nounset
+
+if test -f /etc/apt/apt.conf.d/90-proxy ; then
+  echo "Looks already setup."
+  exit 0
+fi
+
+cat >/etc/apt/proxy-detect <<'EOF'
+#!/bin/bash
+
+PROXY=192.168.60.10:3142
+
+if ! test -x /bin/nc ; then
+  echo DIRECT
+  exit 0
+fi
+
+if nc -w 2 -z ${PROXY/:/ } ; then
+  echo ${PROXY}
+  exit 0
+fi
+
+echo DIRECT
+EOF
+
+chmod 755 /etc/apt/proxy-detect
+
+cat >/etc/apt/apt.conf.d/90-proxy <<'EOF'
+Acquire::http::Proxy-Auto-Detect "/etc/apt/proxy-detect";
+EOF
+
+echo "Setup APT Proxying."

bin/_install_i3.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+apt-get install -y \
+  i3 i3lock xss-lock rxvt-unicode-256color fonts-inconsolata scrot \
+  xautolock xbacklight i3status dex libnotify-bin

bin/autostart.py

@@ -0,0 +1,16 @@
+#!/usr/bin/python
+"""
+Launch desktop files from ~/.config/autostart
+"""
+
+import glob
+import os.path
+from gi.repository import Gio
+
+dirname = os.path.expanduser('~/.config/autostart')
+for desktop in glob.glob(os.path.join(dirname, '*.desktop')):
+    try:
+        fp = Gio.DesktopAppInfo.new_from_filename(desktop)
+    except TypeError:
+        continue
+    fp.launch_uris([], None)

bin/backup.sh

@@ -26,5 +26,5 @@ function verify_dest {
 
 verify_dest "$DEST"
 
-rsync -Hax --delete --exclude-from="$HOME/.rsync_ignore" \
+exec nice rsync -Hax --delete --exclude-from="$HOME/.rsync_ignore" \
   --delete-excluded "${HOME}/" "$DEST"

bin/burp

@@ -1,32 +0,0 @@
-#!/bin/zsh
-
-_start_burp() {
-  setopt localoptions nullglob numeric_glob_sort
-  local NO_DOWNLOAD
-  local JAR
-  if (( ${+argv[(r)*no-download]} )) ; then
-    NO_DOWNLOAD=1
-    shift
-  else
-    NO_DOWNLOAD=0
-  fi
-  JAR=(${HOME}/bin/burpsuite*jar(On[1])) 2>/dev/null
-  if [ -z $JAR ] ; then
-    if (( $NO_DOWNLOAD )) ; then
-      echo "Not downloading, --no-download specified" >&2
-      return 1
-    fi
-    echo "Burp JAR not found in ${HOME}/bin.  Attempting to download free edition." >&2
-    wget -q --content-disposition --no-server-response -P ${HOME}/bin \
-      https://portswigger.net/DownloadUpdate.ashx\?Product\=Free
-    if [ $? -ne 0 ] ; then
-      echo "Download failed." >&2
-      return 1
-    fi
-    burp --no-download "$@"
-    return $?
-  else
-    java -jar ${JAR} "$@"
-  fi
-}
-_start_burp

bin/cyberchef

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+set -u
+
+CHEF_FILE=${HOME}/tools/cyberchef/cyberchef.html
+
+if [ ! -f ${CHEF_FILE} ] ; then
+  ${HOME}/bin/install_tool cyberchef
+fi
+
+exec xdg-open ${CHEF_FILE}

bin/disk-benchmark

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+set -ue
+
+FILENAME=${1}
+BENCHMARK_SIZE=${BENCHMARK_SIZE:-1000m}
+
+if [ -f ${FILENAME} ] ; then
+  echo "File ${FILENAME} already exists!" >/dev/stderr
+  exit 1
+fi
+
+trap "test -f ${FILENAME} && rm -f ${FILENAME}" EXIT
+
+fio --loops=5 --size=${BENCHMARK_SIZE} --filename=${FILENAME} \
+  --stonewall --ioengine=libaio --direct=1 \
+  --name=Seqread --bs=1m --rw=read \
+  --name=Seqwrite --bs=1m --rw=write \
+  --name=512Kread --bs=512k --rw=randread \
+  --name=512Kwrite --bs=512k --rw=randwrite \
+  --name=4kQD32read --bs=4k --iodepth=32 --rw=randread \
+  --name=4kQD32write --bs=4k --iodepth=32 --rw=randwrite

bin/google-chrome-burp

@@ -0,0 +1,3 @@
+#!/bin/bash
+# Launch chrome for burp
+exec /usr/bin/google-chrome-beta --ignore-certificate-errors --user-data-dir=${HOME}/.config/chrome-pentest --proxy-server=127.0.0.1:8080

bin/i3lock.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+LOCKER="i3lock -c 000000"
+# intentionally want word splitting below
+/usr/bin/xss-lock -- ${LOCKER} &
+exec /usr/bin/xautolock \
+  -time 5 \
+  -detectsleep \
+  -locker "${LOCKER}" \
+  -notify 30 \
+  -notifier "notify-send -u critical -t 10000 -- 'LOCKING SCREEN IN 30 SECONDS'"

bin/install_tool

@@ -0,0 +1,258 @@
+#!/bin/bash
+
+set -ue
+
+REINSTALL=0
+PACKAGES=1
+
+while getopts -- "-:" a ; do
+  case "${a}" in
+    -)
+    case "${OPTARG}" in
+      reinstall)
+        REINSTALL=1
+        ;;
+      no-packages)
+        PACKAGES=0
+        ;;
+      *)
+        echo "Unknown long option ${OPTARG}" >/dev/stderr
+        exit 1
+        ;;
+    esac
+  esac
+done
+
+shift $(($OPTIND-1))
+
+if [ $# -ne 1 ] ; then
+  echo "Usage: ${0} <tool>" >/dev/stderr
+  exit 1
+fi
+TOOL=${1}
+
+function die {
+  echo $* >/dev/stderr
+  return 1
+}
+
+function install_pkgs {
+  if [ ${PACKAGES} -eq 0 ] ; then
+    return 0
+  fi
+  # TODO: check if packages are already installed
+  if [ `id -u` -ne "0" ] ; then
+    sudo apt-get -y install $* || (
+      echo -n "Unable to install packages, please ensure these " >/dev/stderr
+      echo "are installed, then run with --no-packages." >/dev/stderr
+      echo $*
+      false )
+    return 0
+  fi
+  apt-get -y install $*
+}
+
+function download {
+  SRC=${1}
+  DST=${2}
+  echo -n "Downloading ${SRC} to ${DST}..." >&2
+  # TODO: consider curl instead?
+  wget --no-server-response -q -O ${DST} --content-disposition ${SRC}
+  echo " done." >&2
+}
+
+function check_sudo {
+  sudo -l >/dev/null
+}
+
+function add_bin_symlink {
+  local TARGET NAME BINDIR
+  TARGET=${1}
+  NAME=${2:-$(basename ${1})}
+  BINDIR=${HOME}/bin/tools/
+  mkdir -p -- ${BINDIR}
+  ln -sf ${DESTDIR}/${TARGET} ${BINDIR}/${NAME}
+}
+
+mkdir -p "${HOME}/tools"
+
+DESTDIR="${HOME}/tools/${TOOL}"
+
+if [ -d ${DESTDIR} ] ; then
+  if [ ${REINSTALL} -eq 1 ] ; then
+    rm -ri ${DESTDIR}
+  else
+    echo "${DESTDIR} exists but not reinstalling." >/dev/stderr
+    exit 1
+  fi
+fi
+
+# Begin main tool selection
+case ${TOOL} in
+  john)
+    install_pkgs libssl-dev git build-essential yasm libgmp-dev libpcap-dev \
+      pkg-config libbz2-dev libopenmpi-dev openmpi-bin libnss3-dev \
+      libkrb5-dev libgmp-dev
+    jtemp=`mktemp -d`
+    git clone https://github.com/magnumripper/JohnTheRipper.git ${jtemp}/john
+    cd ${jtemp}/john/src
+    ./configure && make -sj2
+    mkdir -p ${DESTDIR}
+    cp -r ${jtemp}/john/run/* ${DESTDIR}
+    rm -rf ${jtemp}
+    # Persistent files
+    mkdir -p ${HOME}/.john
+    touch ${HOME}/.john/john.pot
+    ln -sf ${HOME}/.john/* ${DESTDIR}
+    add_bin_symlink john
+    ;;
+  wordlists)
+    mkdir -p ${DESTDIR}
+    download \
+      http://downloads.skullsecurity.org/passwords/rockyou.txt.bz2 \
+      ${DESTDIR}/rockyou.txt.bz2
+    bunzip2 ${DESTDIR}/rockyou.txt.bz2
+    download \
+      http://downloads.skullsecurity.org/passwords/phpbb.txt.bz2 \
+      ${DESTDIR}/phpbb.txt.bz2
+    bunzip2 ${DESTDIR}/phpbb.txt.bz2
+    download \
+      http://downloads.skullsecurity.org/passwords/hak5.txt.bz2 \
+      ${DESTDIR}/hak5.txt.bz2
+    bunzip2 ${DESTDIR}/hak5.txt.bz2
+    ;;
+  seclists)
+    git clone https://github.com/danielmiessler/SecLists.git ${DESTDIR}
+    ;;
+  gcloud)
+    mkdir -p ${DESTDIR}
+    gtemp=`mktemp -d`
+    gbase="https://dl.google.com/dl/cloudsdk/channels/rapid/downloads/"
+    # TODO: find a way to make this version independent
+    gsdk="google-cloud-sdk-209.0.0-linux-x86_64.tar.gz"
+    download "${gbase}${gsdk}" /tmp/gcloud.tar.gz
+    tar zxf /tmp/gcloud.tar.gz --strip-components=1 -C ${DESTDIR}
+    rm /tmp/gcloud.tar.gz
+    add_bin_symlink bin/gcloud
+    ;;
+  android-sdk)
+    # TODO: find a way to make this version independent
+    asdk="https://dl.google.com/android/repository/tools_r25.2.3-linux.zip"
+    download ${asdk} /tmp/android-tools.zip
+    unzip -d ${DESTDIR} /tmp/android-tools.zip
+    rm /tmp/android-tools.zip
+    # Install components
+    ${DESTDIR}/tools/bin/sdkmanager "emulator" "platform-tools"
+    ;;
+  burp)
+    # Install latest burp free
+    mkdir -p ${DESTDIR}
+    download \
+      https://portswigger.net/DownloadUpdate.ashx\?Product\=Free \
+      ${DESTDIR}/burp-free.jar
+    if [ $? -ne 0 ] ; then
+      echo "Download failed." >&2
+      exit 1
+    fi
+    if [ -x /usr/bin/jarwrapper ] ; then
+      # We have binfmt support for jar, so add to bin
+      chmod +x ${DESTDIR}/*.jar
+      ln -sf ${DESTDIR}/*.jar ${HOME}/bin/burp
+    fi
+    ;;
+  mitmproxy)
+    ver=$(python -c 'import urllib2; import json; print(json.load(urllib2.urlopen("https://api.github.com/repos/mitmproxy/mitmproxy/releases/latest"))["name"].replace("v",""))')
+    download https://snapshots.mitmproxy.org/${ver}/mitmproxy-${ver}-linux.tar.gz /tmp/mitmproxy.tar.gz
+    mkdir -p ${DESTDIR}
+    tar zx -C ${DESTDIR} -f /tmp/mitmproxy.tar.gz
+    rm /tmp/mitmproxy.tar.gz
+    add_bin_symlink mitmproxy
+    add_bin_symlink mitmweb
+    ;;
+  esp)
+    src="https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz"
+    download ${src} /tmp/esp32.tar.gz
+    mkdir -p ${DESTDIR}
+    tar zx -C ${DESTDIR} -f /tmp/esp32.tar.gz
+    rm /tmp/esp32.tar.gz
+    git clone --recursive https://github.com/espressif/esp-idf.git ${DESTDIR}/esp-idf
+    ;;
+  dex2jar)
+    src="https://github.com/pxb1988/dex2jar/releases/download/2.0/dex-tools-2.0.zip"
+    download ${src} /tmp/dex2jar.zip
+    tmpd=`mktemp -d`
+    unzip -d ${tmpd} /tmp/dex2jar.zip
+    mv ${tmpd}/* ${DESTDIR}
+    rm /tmp/dex2jar.zip
+    rm -rf ${tmpd}
+    rm ${DESTDIR}/*.bat
+    chmod +x ${DESTDIR}/*.sh
+    ;;
+  proxmark3)
+    install_pkgs p7zip git build-essential libreadline5 libreadline-dev \
+      libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev \
+      gcc-arm-none-eabi libstdc++-arm-none-eabi-newlib
+    src="https://github.com/Proxmark/proxmark3.git"
+    git clone ${src} ${DESTDIR}
+    cd ${DESTDIR}
+    make -sj2
+    check_sudo && sudo /bin/sh -c \
+      "cp -rf driver/78-mm-usb-device-blacklist.rules \
+         /etc/udev/rules.d/77-mm-usb-device-blacklist.rules &&
+         udevadm control --reload-rules"
+    ;;
+  cyberchef)
+    mkdir -p ${DESTDIR}
+    src=$(python -c 'import urllib2; import json; print(filter(lambda x: x["name"]=="cyberchef.htm", json.load(urllib2.urlopen("https://api.github.com/repos/gchq/CyberChef/releases/latest"))["assets"])[0]["browser_download_url"])')
+    download ${src} ${DESTDIR}/cyberchef.html
+    ;;
+  apktool)
+    mkdir -p ${DESTDIR}
+    download \
+      https://raw.githubusercontent.com/iBotPeaches/Apktool/master/scripts/linux/apktool \
+      ${DESTDIR}/apktool
+    download \
+      https://bitbucket.org/iBotPeaches/apktool/downloads/apktool_2.3.3.jar \
+      ${DESTDIR}/apktool.jar
+    chmod +x ${DESTDIR}/apktool
+    add_bin_symlink apktool
+    ;;
+  ptf)
+    src="https://github.com/trustedsec/ptf.git"
+    git clone ${src} ${DESTDIR}
+    ;;
+  pwndbg)
+    if ! which gdb > /dev/null 2>&1 ; then
+      echo 'No gdb available!' >/dev/stderr
+      exit 1
+    fi
+    git clone --depth 1 -b stable https://github.com/pwndbg/pwndbg.git ${DESTDIR}
+    local PY_PACKAGES=${DESTDIR}/vendor
+    mkdir -p ${PY_PACKAGES}
+    local PYVER=$(gdb -batch -q --nx -ex 'pi import platform; print(".".join(platform.python_version_tuple()[:2]))')
+    local PYTHON=$(gdb -batch -q --nx -ex 'pi import sys; print(sys.executable)')
+    PYTHON="${PYTHON}${PYVER}"
+    ${PYTHON} -m pip install --target ${PY_PACKAGES} -Ur ${DESTDIR}/requirements.txt
+    ${PYTHON} -m pip install --target ${PY_PACKAGES} -U capstone unicorn
+    # capstone package is broken
+    cp ${PY_PACKAGES}/usr/lib/*/dist-packages/capstone/libcapstone.so ${PY_PACKAGES}/capstone
+    ;;
+  gef)
+    if ! which gdb > /dev/null 2>&1 ; then
+      echo 'No gdb available!' >/dev/stderr
+      exit 1
+    fi
+    mkdir -p ${DESTDIR}
+    download \
+      https://github.com/hugsy/gef/raw/master/gef.py \
+      ${DESTDIR}/gef.py
+    ;;
+  *)
+    echo "Unknown tool: ${TOOL}" >/dev/stderr
+    echo "Options:" >/dev/stderr
+    for opt in $(awk 'BEGIN {s=0;FS=")"};/main tool selection/{s=1};/^\s+\w+)$/{if(s==1){print $1}}' $0|sort); do
+      echo -e "\t${opt}" >/dev/stderr
+    done
+    exit 1
+    ;;
+esac

bin/metasploit.sh

@@ -1,28 +1,17 @@
 #!/bin/sh
 
 export NAME=$(basename "$0")
-export BASE="/opt/metasploit" # TODO: search this path
+export BASE="/opt/metasploit-framework" # TODO: search this path
+unset GEM_PATH
 
-# Autogen'd
-. ${BASE}/scripts/setenv.sh
-
-# Use Pro's bundled gems instead of the gemcache
-export MSF_BUNDLE_GEMS=0
-export BUNDLE_GEMFILE=${BASE}/apps/pro/Gemfile
-
-# Set a flag so Gemfile can limit gems
-export FRAMEWORK_FLAG=true
-
-export MSF_DATABASE_CONFIG=${BASE}/apps/pro/ui/config/database.yml
-export TERMINFO=${BASE}/common/share/terminfo/
-
-# Check for ruby scripts such as msfconsole directly to avoid having to add
-# msf3 to the path.
-if [ -f "${BASE}/apps/pro/msf3/${NAME}" ]; then
-	exec ${BASE}/apps/pro/msf3/${NAME} "$@"
-fi
-if [ -f "${BASE}/apps/pro/msf3/tools/exploit/${NAME}.rb" ]; then
-  exec ${BASE}/apps/pro/msf3/tools/exploit/${NAME}.rb "$@"
+if [ -f "${BASE}/bin/${NAME}" ] ; then
+  exec "${BASE}/bin/${NAME}" "$@"
 fi
 
-exec ${NAME} "$@"
+if [ -f "${BASE}/embedded/framework/tools/exploit/${NAME}.rb" ]; then
+  exec ${BASE}/embedded/bin/ruby \
+    "${BASE}/embedded/framework/tools/exploit/${NAME}.rb" "$@"
+fi
+
+echo "Couldn't find script." >&2
+exit 1

bin/switch_virt.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+if [ $# -lt 1 ] ; then
+  echo "Usage: $0 <kvm|vbox>" >&2
+  exit 1
+fi
+
+if [ `whoami` != "root" ] ; then
+  if which sudo >/dev/null 2>&1 ; then
+    sudo $0 $*
+    exit
+  fi
+  echo "Sorry, this requires root." >&2
+  exit 1
+fi
+
+if [ "$1" == "kvm" ] ; then
+  /etc/init.d/virtualbox stop
+  modprobe kvm
+  modprobe kvm_intel
+elif [ "$1" == "vbox" ]  ; then
+  rmmod kvm_intel
+  rmmod kvm
+  /etc/init.d/virtualbox start
+else
+  echo 'WTF?' >&2
+  exit 1
+fi

chromeos/hterm.json

@@ -0,0 +1,26 @@
+{
+  "background-color": "rgba(0, 43, 54, 1)",
+  "cursor-color": "rgba(238, 232, 213, 0.5)",
+  "color-palette-overrides": {
+    "0": "#073642",
+    "1": "#dc322f",
+    "2": "#859900",
+    "3": "#b58900",
+    "4": "#268bd2",
+    "5": "#d33682",
+    "6": "#2aa198",
+    "7": "#eee8d5",
+    "8": "#002b36",
+    "9": "#cb4b16",
+    "10": "#586e75",
+    "11": "#657b83",
+    "12": "#839496",
+    "13": "#6c71c4",
+    "14": "#93a1a1",
+    "15": "#fdf6e3"
+  },
+  "font-family": "\"Inconsolata\", \"DejaVu Sans Mono\", \"Noto Sans Mono\", \"Everson Mono\", FreeMono, Menlo, Terminal, monospace",
+  "font-size": "15",
+  "foreground-color": "rgba(238, 232, 213, 1)",
+  "user-css": "https://cdn.jsdelivr.net/gh/wernight/powerline-web-fonts@ba4426cb0c0b05eb6cb342c7719776a41e1f2114/PowerlineFonts.css"
+}

dconf/org/cinnamon/desktop/keybindings

@@ -0,0 +1,24 @@
+[media-keys]
+screensaver=['<Primary><Alt>l', 'XF86ScreenSaver']
+
+[wm]
+move-to-workspace-1=['<Shift><Super>exclam']
+move-to-workspace-2=['<Shift><Super>at']
+move-to-workspace-3=['<Shift><Super>numbersign']
+move-to-workspace-4=['<Shift><Super>dollar']
+move-to-workspace-5=['<Shift><Super>percent']
+move-to-workspace-6=['<Shift><Super>asciicircum']
+move-to-workspace-7=['<Shift><Super>ampersand']
+move-to-workspace-8=['<Shift><Super>asterisk']
+move-to-workspace-9=['<Shift><Super>parenleft']
+switch-to-workspace-4=['<Super>4']
+switch-to-workspace-1=['<Super>1']
+switch-to-workspace-10=['<Super>0']
+switch-to-workspace-3=['<Super>3']
+switch-to-workspace-8=['<Super>8']
+switch-to-workspace-5=['<Super>5']
+move-to-workspace-10=['<Shift><Super>parenright']
+switch-to-workspace-2=['<Super>2']
+switch-to-workspace-9=['<Super>9']
+switch-to-workspace-6=['<Super>6']
+switch-to-workspace-7=['<Super>7']

deb-to-kali.sh

@@ -6,6 +6,10 @@ if [ `whoami` != "root" ] ; then
 fi
 
 BASEDIR=`dirname $0`
+if ! test -f ${BASEDIR}/keys/gpg/kali-repo.key ; then
+  echo "Couldn't find key, are you in the right place?" >&2
+  exit 1
+fi
 
 cat >/etc/apt/sources.list.d/kali.list <<KALI_EOF
 deb http://http.kali.org/kali kali-rolling main contrib non-free

dotfiles/Xresources

@@ -0,0 +1,113 @@
+Xcursor.size: 16
+
+!!!
+! Xft for fonts
+!!!
+!Xft.dpi:                    144
+Xft.antialias:              true
+Xft.lcdfilter:              lcddefault
+Xft.rgba:                   rgb
+Xft.hinting:                true
+Xft.hintstyle:              hintslight
+Xft.autohint:               0
+
+!!!
+! Solarized urxvt
+!!!
+URxvt.depth:                32
+URxvt.geometry:             90x30
+URxvt.transparent:          false
+URxvt.fading:               0
+URxvt.urgentOnBell:         true
+URxvt.visualBell:           false
+URxvt.loginShell:           true
+URxvt.saveLines:            50000
+URxvt.internalBorder:       2
+URxvt.lineSpace:            0
+URxvt.iso14755:             false
+
+! Fonts
+URxvt.font: xft:inconsolata:pixelsize=17,xft:monospace:size=12
+
+! Fix font space
+URxvt.letterSpace: -1
+
+! Scrollbar and scrolling
+URxvt.scrollStyle:          rxvt
+URxvt.scrollBar:            false
+! do not scroll with output
+URxvt.scrollTtyOutput:      false
+! scroll in relation to buffer (with mouse scroll or Shift+Page Up)
+URxvt.scrollWithBuffer:     true
+! scroll back to the bottom on keypress
+URxvt.scrollTtyKeypress:    true
+
+! Allow apps to manage their own secondary screen
+URxvt.secondaryScreen:      1
+URxvt.secondaryScroll:      0
+
+! Perl extensions
+URxvt.perl-ext-common:      default,matcher,font-size,eval
+URxvt.matcher.button:       1
+URxvt.urlLauncher:          /usr/bin/xdg-open
+URxvt.url-launcher:         /usr/bin/xdg-open
+
+! Copy/Paste Stuff
+URxvt.keysym.Shift-Control-V:   eval:paste_clipboard
+URxvt.keysym.Shift-Control-C:   eval:selection_to_clipboard
+
+! Cursor
+URxvt.cursorBlink:          true
+URxvt.cursorUnderline:      false
+
+! Pointer
+URxvt.pointerBlank:         true
+
+! Disable printing the terminal contents when pressing PrintScreen.
+URxvt.print-pipe:           "cat > /dev/null"
+
+!!! Solarized colors begin
+! base03
+URxvt.background:             #002b36
+! base0
+URxvt.foreground:             #839496
+! base03
+URxvt.fadeColor:              #002b36
+! base1
+URxvt.cursorColor:            #93a1a1
+! base01
+URxvt.pointerColorBackground: #586e75
+! base1
+URxvt.pointerColorForeground: #93a1a1
+
+!! black dark/light
+URxvt.color0: #073642
+URxvt.color8: #002b36
+
+!! red dark/light
+URxvt.color1: #dc322f
+URxvt.color9: #cb4b16
+
+!! green dark/light
+URxvt.color2: #859900
+URxvt.color10: #586e75
+
+!! yellow dark/light
+URxvt.color3: #b58900
+URxvt.color11: #657b83
+
+!! blue dark/light
+URxvt.color4: #268bd2
+URxvt.color12: #839496
+
+!! magenta dark/light
+URxvt.color5: #d33682
+URxvt.color13: #6c71c4
+
+!! cyan dark/light
+URxvt.color6: #2aa198
+URxvt.color14: #93a1a1
+
+!! white dark/light
+URxvt.color7: #eee8d5
+URxvt.color15: #fdf6e3

dotfiles/aliases

@@ -5,13 +5,18 @@
 alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'
 
 # Cryptsetup alias
-alias luksFormat='sudo cryptsetup luksFormat -s 512 -c aes-xts-plain --use-random -h sha256 -i 5000'
+alias luksFormat='cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha256 -i 15000'
 
 # Colors
-alias ls='ls --color=auto'
-alias grep='grep --color=auto'
-alias egrep='egrep --color=auto'
-alias fgrep='fgrep --color=auto'
+if ls --version >/dev/null 2>&1 ; then
+  alias ls='ls --color=auto'
+fi
+if [ `uname` != 'Darwin' -a `uname` != 'NetBSD' -a `uname` != 'FreeBSD' -a `uname` != 'OpenBSD' ] ; then
+  # Should have a better way to check for GNU versions
+  alias grep='grep --color=auto'
+  alias egrep='egrep --color=auto'
+  alias fgrep='fgrep --color=auto'
+fi
 
 # Easy upgrade
 alias dist-upgrade="sudo sh -c 'apt-get update && apt-get -y dist-upgrade'"
@@ -25,8 +30,11 @@ alias mdcode="sed 's/^/    /'"
 # Intel format plz
 alias objdump="command objdump -M intel"
 
-# ACK
-alias ack="ack-grep"
+# Useful directory utilities
+alias dircount="for d in * ; do find \$d -type d | wc -l | tr -d '\n' ; echo ' ' \$d ; done | sort -n"
 
-# Launch chrome for burp
-alias chrome-for-burp="/usr/bin/google-chrome --ignore-certificate-errors --user-data-dir=${HOME}/.chrome-for-burp --proxy-server=127.0.0.1:8080 >/dev/null 2>&1 &"
+# Drop caches for swap issues
+alias drop_caches="echo 3 | sudo /usr/bin/tee /proc/sys/vm/drop_caches"
+
+# dump acpi temperature
+alias temp='printf "%02.2f\n" "$(cat /sys/class/thermal/thermal_zone0/temp)e-3"'

dotfiles/bashrc

@@ -13,7 +13,7 @@ HISTFILESIZE=0
 shopt -s checkwinsize
 
 # Fancier outputs
-[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
+[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe 2>/dev/null)"
 
 if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
     PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '

dotfiles/config/i3/config

@@ -0,0 +1,198 @@
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+set $alt Mod1
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 8
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec i3-sensible-terminal
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec dmenu_run
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+bindsym $mod+Shift+d exec --no-startup-id i3-dmenu-desktop
+
+# move focus
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move windows
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# switch to workspace
+bindsym $mod+1 workspace 1
+bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3
+bindsym $mod+4 workspace 4
+bindsym $mod+5 workspace 5
+bindsym $mod+6 workspace 6
+bindsym $mod+7 workspace 7
+bindsym $mod+8 workspace 8
+bindsym $mod+9 workspace 9
+bindsym $mod+0 workspace 10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace 1
+bindsym $mod+Shift+2 move container to workspace 2
+bindsym $mod+Shift+3 move container to workspace 3
+bindsym $mod+Shift+4 move container to workspace 4
+bindsym $mod+Shift+5 move container to workspace 5
+bindsym $mod+Shift+6 move container to workspace 6
+bindsym $mod+Shift+7 move container to workspace 7
+bindsym $mod+Shift+8 move container to workspace 8
+bindsym $mod+Shift+9 move container to workspace 9
+bindsym $mod+Shift+0 move container to workspace 10
+
+# Move workspaces between monitors
+bindsym $mod+Shift+greater move workspace to output right
+bindsym $mod+Shift+less move workspace to output left
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec \
+  "i3-nagbar -t warning -m \
+    'You pressed the exit shortcut. Do you really want to exit i3? \
+     This will end your X session.' \
+    -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+        bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or mod+r to toggle
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command bash -c "i3status -c <(~/.config/i3status/build_config.sh)"
+}
+
+# Cycle through workspaces like cinnamon
+bindsym $alt+Control+Right workspace next
+bindsym $alt+Control+Left workspace prev
+
+# i3 lock
+exec --no-startup-id ~/bin/i3lock.sh &
+exec --no-startup-id xset dpms 600
+bindsym $mod+l exec \
+  bash -c "i3lock -c 000000 && (sleep 2 && xset dpms force off) &"
+bindsym $alt+Control+l exec \
+  bash -c "i3lock -c 000000 && (sleep 2 && xset dpms force off) &"
+
+# things to start quickly
+bindsym $mod+g exec /usr/bin/google-chrome-beta --password-store=gnome
+
+# kill a window with middle click + mod
+bindsym --whole-window $mod+button2 kill
+# float a window with right click + mod
+bindsym --whole-window $mod+button3 floating toggle
+
+# media keys
+# Pulse Audio controls
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 +5%
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -5%
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 0 toggle
+# Screen brightness controls
+bindsym XF86MonBrightnessUp exec --no-startup-id xbacklight -inc 10
+bindsym XF86MonBrightnessDown exec --no-startup-id xbacklight -dec 10
+
+# screenshots
+set $scrotformat %F-%T.png
+set $screendir ~/Pictures/Screenshots
+# whole screen
+bindsym --release Print exec --no-startup-id \
+  mkdir -p $screendir && \
+  /usr/bin/scrot $screendir/$scrotformat
+# current window
+bindsym --release Shift+Print exec --no-startup-id \
+  mkdir -p $screendir && \
+  /usr/bin/scrot -u $screendir/$scrotformat
+# selection
+bindsym --release $alt+Sys_Req exec --no-startup-id \
+  mkdir -p $screendir && \
+  /usr/bin/scrot -s $screendir/$scrotformat
+
+# useful utilities
+#exec --no-startup-id \
+#  (which xss-lock >/dev/null || /usr/bin/cinnamon-settings-daemon) &
+exec --no-startup-id gnome-keyring-daemon --start --components=pkcs11,secrets
+# Make GTK fonts look great again
+#exec --no-startup-id gnome-settings-daemon
+#exec --no-startup-id (sleep 2; nm-applet) &
+exec --no-startup-id xset r rate 200 20
+#exec --no-startup-id ~/bin/autostart.py
+exec --no-startup-id dex --autostart --environment x-cinnamon
+
+# customize windows
+for_window [window_role="pop-up"] floating enable
+for_window [window_role="bubble"] floating enable
+for_window [window_role="task_dialog"] floating enable
+for_window [window_role="Preferences"] floating enable
+for_window [window_type="dialog"] floating enable
+for_window [window_type="menu"] floating enable
+
+for_window [class="^google-chrome$"] border pixel
+for_window [class="^Google-chrome-beta$"] border pixel
+for_window [class="^burp-StartBurp$" title="^(?!Burp Suite)"] floating enable
+
+# no need for borders on the edge of the screen
+hide_edge_borders both
+
+# vim:filetype=i3

dotfiles/config/i3status/build_config.sh

@@ -0,0 +1,143 @@
+#!/bin/bash
+
+function general {
+	cat <<-EOF
+		general {
+			colors = true
+			interval = 5
+		}
+	EOF
+}
+
+function disks {
+	local DISKS=(/ /home)
+	local d
+	local used
+	for d in ${DISKS[@]} ; do
+		local dev=`df $d | tail -1 | awk '{print $1}'`
+		if [[ $used == *$dev* ]] ; then
+			continue
+		fi
+		local size=`df $d | tail -1 | awk '{print $2}'`
+		if [ $size -eq 0 ] ; then
+			continue
+		fi
+		used="${used} ${dev}"
+		cat <<-EOF
+			disk "${d}" {
+				format = "${d} %avail"
+			}
+			order += "disk ${d}"
+		EOF
+	done
+}
+
+function wireless {
+	which iwconfig >/dev/null || return
+	iwconfig 2>&1 | grep . | grep -vq 'no wireless extensions' || return
+	cat <<-EOF
+		wireless _first_ {
+			format_up = "W: (%quality %essid) %ip"
+			format_down = "W: down"
+		}
+		order += "wireless _first_"
+	EOF
+}
+
+function wired {
+	local def_iface="$(ip route get 1.1.1.1 2>&1 | grep -oP 'dev \K\S+')"
+	if test -n "${def_iface}" ; then
+		cat <<-EOF
+			ethernet "${def_iface}" {
+				format_up = "E: %ip"
+				format_down = "E: down"
+			}
+			order += "ethernet ${def_iface}"
+		EOF
+		return 0
+	fi
+	cat <<-EOF
+		ethernet _first_ {
+			format_up = "E: %ip"
+			format_down = "E: down"
+		}
+		order += "ethernet _first_"
+	EOF
+}
+
+function ipv6 {
+	echo "order += \"ipv6\""
+}
+
+function load {
+	cat <<-EOF
+		load {
+			format = "%1min %5min"
+		}
+		order += "load"
+	EOF
+}
+
+function now {
+	cat <<-EOF
+		tztime local {
+			format = "%Y-%m-%d %H:%M"
+		}
+		order += "tztime local"
+	EOF
+}
+
+function battery {
+	local bat
+	shopt -s nullglob
+	for bat in /sys/class/power_supply/BAT* ; do
+		local bid=${bat##*BAT}
+		cat <<-EOF
+			battery ${bid} {
+				low_threshold = 15
+				threshold_type = time
+				status_chr = "↑ CHR"
+				status_bat = "↓ BAT"
+		EOF
+		if [ $(bc <<< "$(i3status --version | awk '{print $2}') < 2.11") -eq 0 ] ;
+		then
+			cat <<-EOF
+				status_unk = "? UNK"
+			EOF
+		fi
+		cat <<-EOF
+				status_full = "FULL"
+				format = "%status %percentage"
+				path = "/sys/class/power_supply/BAT${bid}/uevent"
+				hide_seconds = true
+				last_full_capacity = true
+			}
+			order += "battery ${bid}"
+		EOF
+	done
+}
+
+function audio {
+	cat <<-EOF
+		volume master {
+			format = "♪: %volume"
+			format_muted = "♪: MUTE"
+			device = "default"
+			mixer = "Master"
+			mixer_idx = 0
+		}
+		order += "volume master"
+	EOF
+}
+
+general
+disks
+wireless
+wired
+ipv6
+load
+battery
+audio
+now
+
+# vim: noexpandtab

dotfiles/config/i3status/config

@@ -0,0 +1,52 @@
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+        colors = true
+        interval = 5
+}
+
+order += "ipv6"
+order += "disk /"
+order += "disk /home"
+order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery all"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+        format_up = "W: (%quality at %essid) %ip"
+        format_down = "W: down"
+}
+
+ethernet _first_ {
+        # if you use %speed, i3status requires root privileges
+        format_up = "E: %ip (%speed)"
+        format_down = "E: down"
+}
+
+battery all {
+        format = "%status %percentage %remaining"
+}
+
+tztime local {
+        format = "%Y-%m-%d %H:%M:%S"
+}
+
+load {
+        format = "%1min"
+}
+
+disk "/" {
+        format = "%avail"
+}
+
+disk "/home" {
+        format = "%avail"
+}

dotfiles/config/redshift.conf

@@ -0,0 +1,11 @@
+[redshift]
+temp-day=5700
+temp-night=4750
+transition=1
+brightness-day=1.0
+brightness-night=0.9
+adjustment-method=randr
+
+[manual]
+lat=37.3
+lon=-121.9

dotfiles/config/systemd/user/tracker-store.service

@@ -0,0 +1 @@
+/dev/null

dotfiles/curlrc

@@ -1,4 +1,3 @@
 tlsv1
-user-agent = "Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/37.0 Safari/537.36"
 create-dirs
 referer = ";auto"

dotfiles/dircolors

@@ -1,16 +1,51 @@
-
-# Dark 256 color solarized theme for the color GNU ls utility.
-# Used and tested with dircolors (GNU coreutils) 8.5
+# Exact Solarized Dark color theme for the color GNU ls utility.
+# Designed for dircolors (GNU coreutils) 5.97
 #
-# @author  {@link http://sebastian.tramp.name Sebastian Tramp}
-# @license http://sam.zoy.org/wtfpl/  Do What The Fuck You Want To Public License (WTFPL)
+# This simple theme was simultaneously designed for these terminal color schemes:
+# - Solarized dark  (best)
+# - Solarized light
+# - default dark
+# - default light
+# with a slight optimization for Solarized Dark.
 #
-# More Information at
-# https://github.com/seebi/dircolors-solarized
+# How the colors were selected:
+# - Terminal emulators often have an option typically enabled by default that makes
+#   bold a different color.  It is important to leave this option enabled so that
+#   you can access the entire 16-color Solarized palette, and not just 8 colors.
+# - We favor universality over a greater number of colors.  So we limit the number
+#   of colors so that this theme will work out of the box in all terminals,
+#   Solarized or not, dark or light.
+# - We choose to have the following category of files:
+#   NORMAL & FILE, DIR, LINK, EXEC and
+#   editable text including source, unimportant text, binary docs & multimedia source
+#   files, viewable multimedia, archived/compressed, and unimportant non-text
+# - For uniqueness, we stay away from the Solarized foreground colors are -- either
+#   base00 (brightyellow) or base0 (brightblue).  However, they can be used if
+#   you know what the bg/fg colors of your terminal are, in order to optimize the display.
+# - 3 different options are provided: universal, solarized dark, and solarized light.
+#   The only difference between the universal scheme and one that's optimized for
+#   dark/light is the color of "unimportant" files, which should blend more with the
+#   background
+# - We note that blue is the hardest color to see on dark bg and yellow is the hardest
+#   color to see on light bg (with blue being particularly bad).  So we choose yellow
+#   for multimedia files which are usually accessed in a GUI folder browser anyway.
+#   And blue is kept for custom use of this scheme's user.
+# - See table below to see the assignments.
 
-# Term Section
-TERM Eterm
+
+# Installation instructions:
+# This file goes in the /etc directory, and must be world readable.
+# You can copy this file to .dir_colors in your $HOME directory to override
+# the system defaults.
+
+# COLOR needs one of these arguments: 'tty' colorizes output to ttys, but not
+# pipes. 'all' adds color characters to all output. 'none' shuts colorization
+# off.
+COLOR tty
+
+# Below, there should be one TERM entry for each termtype that is colorizable
 TERM ansi
+TERM color_xterm
 TERM color-xterm
 TERM con132x25
 TERM con132x30
@@ -28,6 +63,7 @@ TERM cygwin
 TERM dtterm
 TERM dvtm
 TERM dvtm-256color
+TERM Eterm
 TERM eterm-color
 TERM fbterm
 TERM gnome
@@ -40,6 +76,7 @@ TERM linux
 TERM linux-c
 TERM mach-color
 TERM mlterm
+TERM nxterm
 TERM putty
 TERM putty-256color
 TERM rxvt
@@ -63,12 +100,16 @@ TERM screen-bce
 TERM screen-w
 TERM screen.linux
 TERM screen.xterm-256color
+TERM screen.xterm-new
 TERM st
 TERM st-meta
 TERM st-256color
 TERM st-meta-256color
+TERM tmux
+TERM tmux-256color
 TERM vt100
 TERM xterm
+TERM xterm-new
 TERM xterm-16color
 TERM xterm-256color
 TERM xterm-256color-italic
@@ -77,219 +118,363 @@ TERM xterm-color
 TERM xterm-debian
 TERM xterm-termite
 
-## Documentation
-#
-# standard colors
-#
+# EIGHTBIT, followed by '1' for on, '0' for off. (8-bit output)
+EIGHTBIT 1
+
+#############################################################################
 # Below are the color init strings for the basic file types. A color init
 # string consists of one or more of the following numeric codes:
+#
 # Attribute codes:
-# 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
+#   00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
 # Text color codes:
-# 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
+#   30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
 # Background color codes:
-# 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white
+#   40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white
 #
-#
-# 256 color support
-# see here: http://www.mail-archive.com/bug-coreutils@gnu.org/msg11030.html)
-#
-# Text 256 color coding:
-# 38;5;COLOR_NUMBER
-# Background 256 color coding:
-# 48;5;COLOR_NUMBER
-
-## Special files
-
-NORMAL 00;38;5;244 # no color code at all
-#FILE 00 # regular file: use no color at all
-RESET 0 # reset to "normal" color
-DIR 00;38;5;33 # directory 01;34
-LINK 00;38;5;37 # symbolic link. (If you set this to 'target' instead of a
- # numerical value, the color is as for the file pointed to.)
-MULTIHARDLINK 00 # regular file with more than one link
-FIFO 48;5;230;38;5;136;01 # pipe
-SOCK 48;5;230;38;5;136;01 # socket
-DOOR 48;5;230;38;5;136;01 # door
-BLK 48;5;230;38;5;244;01 # block device driver
-CHR 48;5;230;38;5;244;01 # character device driver
-ORPHAN 48;5;235;38;5;160 # symlink to nonexistent file, or non-stat'able file
-SETUID 48;5;160;38;5;230 # file that is setuid (u+s)
-SETGID 48;5;136;38;5;230 # file that is setgid (g+s)
-CAPABILITY 30;41 # file with capability
-STICKY_OTHER_WRITABLE 48;5;64;38;5;230 # dir that is sticky and other-writable (+t,o+w)
-OTHER_WRITABLE 48;5;235;38;5;33 # dir that is other-writable (o+w) and not sticky
-STICKY 48;5;33;38;5;230 # dir with the sticky bit set (+t) and not other-writable
-# This is for files with execute permission:
-EXEC 00;38;5;64
-
-## Archives or compressed (violet + bold for compression)
-.tar    00;38;5;61
-.tgz    00;38;5;61
-.arj    00;38;5;61
-.taz    00;38;5;61
-.lzh    00;38;5;61
-.lzma   00;38;5;61
-.tlz    00;38;5;61
-.txz    00;38;5;61
-.zip    00;38;5;61
-.z      00;38;5;61
-.Z      00;38;5;61
-.dz     00;38;5;61
-.gz     00;38;5;61
-.lz     00;38;5;61
-.xz     00;38;5;61
-.bz2    00;38;5;61
-.bz     00;38;5;61
-.tbz    00;38;5;61
-.tbz2   00;38;5;61
-.tz     00;38;5;61
-.deb    00;38;5;61
-.rpm    00;38;5;61
-.jar    00;38;5;61
-.rar    00;38;5;61
-.ace    00;38;5;61
-.zoo    00;38;5;61
-.cpio   00;38;5;61
-.7z     00;38;5;61
-.rz     00;38;5;61
-.apk    00;38;5;61
-.gem    00;38;5;61
-
-# Image formats (yellow)
-.jpg    00;38;5;136
-.JPG    00;38;5;136 #stupid but needed
-.jpeg   00;38;5;136
-.gif    00;38;5;136
-.bmp    00;38;5;136
-.pbm    00;38;5;136
-.pgm    00;38;5;136
-.ppm    00;38;5;136
-.tga    00;38;5;136
-.xbm    00;38;5;136
-.xpm    00;38;5;136
-.tif    00;38;5;136
-.tiff   00;38;5;136
-.png    00;38;5;136
-.PNG    00;38;5;136
-.svg    00;38;5;136
-.svgz   00;38;5;136
-.mng    00;38;5;136
-.pcx    00;38;5;136
-.dl     00;38;5;136
-.xcf    00;38;5;136
-.xwd    00;38;5;136
-.yuv    00;38;5;136
-.cgm    00;38;5;136
-.emf    00;38;5;136
-.eps    00;38;5;136
-.CR2    00;38;5;136
-.ico    00;38;5;136
-
-# Files of special interest (base1)
-.tex             00;38;5;245
-.rdf             00;38;5;245
-.owl             00;38;5;245
-.n3              00;38;5;245
-.ttl             00;38;5;245
-.nt              00;38;5;245
-.torrent         00;38;5;245
-.xml             00;38;5;245
-*Makefile        00;38;5;245
-*Rakefile        00;38;5;245
-*Dockerfile      00;38;5;245
-*build.xml       00;38;5;245
-*rc              00;38;5;245
-*1               00;38;5;245
-.nfo             00;38;5;245
-*README          00;38;5;245
-*README.txt      00;38;5;245
-*readme.txt      00;38;5;245
-.md              00;38;5;245
-*README.markdown 00;38;5;245
-.ini             00;38;5;245
-.yml             00;38;5;245
-.cfg             00;38;5;245
-.conf            00;38;5;245
-.c               00;38;5;245
-.cpp             00;38;5;245
-.cc              00;38;5;245
-.sqlite          00;38;5;245
-.go              00;38;5;245
-.sql             00;38;5;245
-
-# "unimportant" files as logs and backups (base01)
-.log        00;38;5;240
-.bak        00;38;5;240
-.aux        00;38;5;240
-.lof        00;38;5;240
-.lol        00;38;5;240
-.lot        00;38;5;240
-.out        00;38;5;240
-.toc        00;38;5;240
-.bbl        00;38;5;240
-.blg        00;38;5;240
-*~          00;38;5;240
-*#          00;38;5;240
-.part       00;38;5;240
-.incomplete 00;38;5;240
-.swp        00;38;5;240
-.tmp        00;38;5;240
-.temp       00;38;5;240
-.o          00;38;5;240
-.pyc        00;38;5;240
-.class      00;38;5;240
-.cache      00;38;5;240
-
-# Audio formats (orange)
-.aac    00;38;5;166
-.au     00;38;5;166
-.flac   00;38;5;166
-.mid    00;38;5;166
-.midi   00;38;5;166
-.mka    00;38;5;166
-.mp3    00;38;5;166
-.mpc    00;38;5;166
-.ogg    00;38;5;166
-.ra     00;38;5;166
-.wav    00;38;5;166
-.m4a    00;38;5;166
-# http://wiki.xiph.org/index.php/MIME_Types_and_File_Extensions
-.axa    00;38;5;166
-.oga    00;38;5;166
-.spx    00;38;5;166
-.xspf   00;38;5;166
-
-# Video formats (as audio + bold)
-.mov    00;38;5;166
-.MOV    00;38;5;166
-.mpg    00;38;5;166
-.mpeg   00;38;5;166
-.m2v    00;38;5;166
-.mkv    00;38;5;166
-.ogm    00;38;5;166
-.mp4    00;38;5;166
-.m4v    00;38;5;166
-.mp4v   00;38;5;166
-.vob    00;38;5;166
-.qt     00;38;5;166
-.nuv    00;38;5;166
-.wmv    00;38;5;166
-.asf    00;38;5;166
-.rm     00;38;5;166
-.rmvb   00;38;5;166
-.flc    00;38;5;166
-.avi    00;38;5;166
-.fli    00;38;5;166
-.flv    00;38;5;166
-.gl     00;38;5;166
-.m2ts   00;38;5;166
-.divx   00;38;5;166
-.webm   00;38;5;166
-# http://wiki.xiph.org/index.php/MIME_Types_and_File_Extensions
-.axv 00;38;5;166
-.anx 00;38;5;166
-.ogv 00;38;5;166
-.ogx 00;38;5;166
+# NOTES:
+# - See http://www.oreilly.com/catalog/wdnut/excerpt/color_names.html
+# - Color combinations
+#   ANSI Color code       Solarized  Notes                Universal             SolDark              SolLight
+#   ~~~~~~~~~~~~~~~       ~~~~~~~~~  ~~~~~                ~~~~~~~~~             ~~~~~~~              ~~~~~~~~
+#   00    none                                            NORMAL, FILE          <SAME>               <SAME>
+#   30    black           base02
+#   01;30 bright black    base03     bg of SolDark
+#   31    red             red                             docs & mm src         <SAME>               <SAME>
+#   01;31 bright red      orange                          EXEC                  <SAME>               <SAME>
+#   32    green           green                           editable text         <SAME>               <SAME>
+#   01;32 bright green    base01                          unimportant text      <SAME>
+#   33    yellow          yellow     unclear in light bg  multimedia            <SAME>               <SAME>
+#   01;33 bright yellow   base00     fg of SolLight                             unimportant non-text
+#   34    blue            blue       unclear in dark bg   user customized       <SAME>               <SAME>
+#   01;34 bright blue     base0      fg in SolDark                                                   unimportant text
+#   35    magenta         magenta                         LINK                  <SAME>               <SAME>
+#   01;35 bright magenta  violet                          archive/compressed    <SAME>               <SAME>
+#   36    cyan            cyan                            DIR                   <SAME>               <SAME>
+#   01;36 bright cyan     base1                           unimportant non-text                       <SAME>
+#   37    white           base2
+#   01;37 bright white    base3      bg in SolLight
+#   05;37;41                         unclear in Putty dark
 
 
+### By file type
+
+# global default
+NORMAL 00
+# normal file
+FILE 00
+# directory
+DIR 34
+# 777 directory
+OTHER_WRITABLE 34;40
+# symbolic link
+LINK 35
+
+# pipe, socket, block device, character device (blue bg)
+FIFO 30;44
+SOCK 35;44
+DOOR 35;44 # Solaris 2.5 and later
+BLK  33;44
+CHR  37;44
+
+
+#############################################################################
+### By file attributes
+
+# Orphaned symlinks (blinking white on red)
+# Blink may or may not work (works on iTerm dark or light, and Putty dark)
+ORPHAN  05;37;41
+# ... and the files that orphaned symlinks point to (blinking white on red)
+MISSING 05;37;41
+
+# files with execute permission
+EXEC 01;31  # Unix
+.cmd 01;31  # Win
+.exe 01;31  # Win
+.com 01;31  # Win
+.bat 01;31  # Win
+.reg 01;31  # Win
+.app 01;31  # OSX
+
+#############################################################################
+### By extension
+
+# List any file extensions like '.gz' or '.tar' that you would like ls
+# to colorize below. Put the extension, a space, and the color init string.
+# (and any comments you want to add after a '#')
+
+### Text formats
+
+# Text that we can edit with a regular editor
+.txt 32
+.org 32
+.md 32
+.mkd 32
+
+# Source text
+.h 32
+.hpp 32
+.c 32
+.C 32
+.cc 32
+.cpp 32
+.cxx 32
+.objc 32
+.cl 32
+.sh 32
+.bash 32
+.csh 32
+.zsh 32
+.el 32
+.vim 32
+.java 32
+.pl 32
+.pm 32
+.py 32
+.rb 32
+.hs 32
+.php 32
+.htm 32
+.html 32
+.shtml 32
+.erb 32
+.haml 32
+.xml 32
+.rdf 32
+.css 32
+.sass 32
+.scss 32
+.less 32
+.js 32
+.coffee 32
+.man 32
+.0 32
+.1 32
+.2 32
+.3 32
+.4 32
+.5 32
+.6 32
+.7 32
+.8 32
+.9 32
+.l 32
+.n 32
+.p 32
+.pod 32
+.tex 32
+.go 32
+.sql 32
+.csv 32
+.sv 32
+.svh 32
+.v 32
+.vh 32
+.vhd 32
+
+### Multimedia formats
+
+# Image
+.bmp 33
+.cgm 33
+.dl 33
+.dvi 33
+.emf 33
+.eps 33
+.gif 33
+.jpeg 33
+.jpg 33
+.JPG 33
+.mng 33
+.pbm 33
+.pcx 33
+.pdf 33
+.pgm 33
+.png 33
+.PNG 33
+.ppm 33
+.pps 33
+.ppsx 33
+.ps 33
+.svg 33
+.svgz 33
+.tga 33
+.tif 33
+.tiff 33
+.xbm 33
+.xcf 33
+.xpm 33
+.xwd 33
+.xwd 33
+.yuv 33
+
+# Audio
+.aac 33
+.au  33
+.flac 33
+.m4a 33
+.mid 33
+.midi 33
+.mka 33
+.mp3 33
+.mpa 33
+.mpeg 33
+.mpg 33
+.ogg  33
+.opus 33
+.ra 33
+.wav 33
+
+# Video
+.anx 33
+.asf 33
+.avi 33
+.axv 33
+.flc 33
+.fli 33
+.flv 33
+.gl 33
+.m2v 33
+.m4v 33
+.mkv 33
+.mov 33
+.MOV 33
+.mp4 33
+.mp4v 33
+.mpeg 33
+.mpg 33
+.nuv 33
+.ogm 33
+.ogv 33
+.ogx 33
+.qt 33
+.rm 33
+.rmvb 33
+.swf 33
+.vob 33
+.webm 33
+.wmv 33
+
+### Misc
+
+# Binary document formats and multimedia source
+.doc 31
+.docx 31
+.rtf 31
+.odt 31
+.dot 31
+.dotx 31
+.ott 31
+.xls 31
+.xlsx 31
+.ods 31
+.ots 31
+.ppt 31
+.pptx 31
+.odp 31
+.otp 31
+.fla 31
+.psd 31
+
+# Archives, compressed
+.7z   1;35
+.apk  1;35
+.arj  1;35
+.bin  1;35
+.bz   1;35
+.bz2  1;35
+.cab  1;35  # Win
+.deb  1;35
+.dmg  1;35  # OSX
+.gem  1;35
+.gz   1;35
+.iso  1;35
+.jar  1;35
+.msi  1;35  # Win
+.rar  1;35
+.rpm  1;35
+.tar  1;35
+.tbz  1;35
+.tbz2 1;35
+.tgz  1;35
+.tx   1;35
+.war  1;35
+.xpi  1;35
+.xz   1;35
+.z    1;35
+.Z    1;35
+.zip  1;35
+
+# For testing
+.ANSI-30-black 30
+.ANSI-01;30-brblack 01;30
+.ANSI-31-red 31
+.ANSI-01;31-brred 01;31
+.ANSI-32-green 32
+.ANSI-01;32-brgreen 01;32
+.ANSI-33-yellow 33
+.ANSI-01;33-bryellow 01;33
+.ANSI-34-blue 34
+.ANSI-01;34-brblue 01;34
+.ANSI-35-magenta 35
+.ANSI-01;35-brmagenta 01;35
+.ANSI-36-cyan 36
+.ANSI-01;36-brcyan 01;36
+.ANSI-37-white 37
+.ANSI-01;37-brwhite 01;37
+
+#############################################################################
+# Your customizations
+
+# Unimportant text files
+# For universal scheme, use brightgreen 01;32
+# For optimal on light bg (but too prominent on dark bg), use white 01;34
+.log 01;32
+*~ 01;32
+*# 01;32
+#.log 01;34
+#*~ 01;34
+#*# 01;34
+
+# Unimportant non-text files
+# For universal scheme, use brightcyan 01;36
+# For optimal on dark bg (but too prominent on light bg), change to 01;33
+#.bak 01;36
+#.BAK 01;36
+#.old 01;36
+#.OLD 01;36
+#.org_archive 01;36
+#.off 01;36
+#.OFF 01;36
+#.dist 01;36
+#.DIST 01;36
+#.orig 01;36
+#.ORIG 01;36
+#.swp 01;36
+#.swo 01;36
+#*,v 01;36
+.bak 01;33
+.BAK 01;33
+.old 01;33
+.OLD 01;33
+.org_archive 01;33
+.off 01;33
+.OFF 01;33
+.dist 01;33
+.DIST 01;33
+.orig 01;33
+.ORIG 01;33
+.swp 01;33
+.swo 01;33
+*,v 01;33
+
+# The brightmagenta (Solarized: purple) color is free for you to use for your
+# custom file type
+.gpg 34
+.gpg 34
+.pgp 34
+.asc 34
+.3des 34
+.aes 34
+.enc 34
+.sqlite 34

dotfiles/env

@@ -1,24 +1,82 @@
 # Sourced by zshrc as well as bash.
+# Should only use POSIX shell constructs.
 
 umask 027
-ulimit -c unlimited
 
 # Paths and preferences
-export PATH="$HOME/bin:/sbin:/usr/sbin:$PATH"
 export PYTHONPATH="$HOME/.python:$PYTHONPATH"
-export GOPATH="$HOME/.go"
+export GOPATH="$HOME/Projects/Go:/usr/share/gocode"
+export PATH="$HOME/bin:/sbin:/usr/sbin:$PATH:$GOPATH/bin"
 export VISUAL=vim
 export EDITOR=vim
 export DEBEMAIL="david@systemoverlord.com"
 export DEBFULLNAME="David Tomaschik"
 export LESS="-MR"
-
-# Unconditional because /bin/sh sucks
-export PATH="$PATH:$HOME/.gce/google-cloud-sdk/bin:$HOME/bin/genymotion:$HOME/bin/genymotion/tools:$HOME/bin/google_appengine:$HOME/bin/go_appengine"
+export QUOTING_STYLE="literal"  # Coreutils quotes
 
 # Fix gnome-terminal
-if [[ $TERM == "xterm" && $COLORTERM == "gnome-terminal" ]] ; then
+if [ "$TERM" = "xterm" ] && [ "$COLORTERM" = "gnome-terminal" ] ; then
+  # Requires `ncurses-base` package for terminfo.
   export TERM="xterm-256color"
 fi
 
-if [[ -e $HOME/.localenv ]] ; then source $HOME/.localenv ; fi
+# Terminal preferences for i3
+if [ -z "${TERMINAL}" ] ; then
+  for t in urxvt gnome-terminal; do
+    if TERMINAL=$(command -v ${t}) ; then
+      export TERMINAL
+    fi
+  done
+fi
+
+# Browser preferences
+if [ -z "${BROWSER}" ] ; then
+  for t in google-chrome-beta google-chrome firefox ; do
+    if BROWSER=$(command -v ${t}); then
+      export BROWSER
+    fi
+  done
+fi
+
+# For virtualenvwrapper
+export WORKON_HOME=$HOME/.virtualenvs
+export VIRTUALENVWRAPPER_VIRTUALENV_ARGS='--no-site-packages'
+
+# GPG full key id
+export GPG_ID=7FD58D9A196DCEEEAD671F94F4D7A7915DEA789B
+
+# Setup locale
+if test -x /usr/bin/locale ; then
+  for l in en_US.utf8 C.UTF-8 C ; do
+    if /usr/bin/locale -a | grep -q "${l}" ; then
+      export LC_CTYPE=${l}
+      export LC_NUMERIC=${l}
+      export LC_TIME=${l}
+      export LC_MONETARY=${l}
+      export LC_MESSAGES=${l}
+      export LC_PAPER=${l}
+      export LC_NAME=${l}
+      export LC_ADDRESS=${l}
+      export LC_TELEPHONE=${l}
+      export LC_MEASUREMENT=${l}
+      export LC_IDENTIFICATION=${l}
+      break
+    fi
+  done
+else
+  export LC_CTYPE=C
+  export LC_NUMERIC=C
+  export LC_TIME=C
+  export LC_MONETARY=C
+  export LC_MESSAGES=C
+  export LC_PAPER=C
+  export LC_NAME=C
+  export LC_ADDRESS=C
+  export LC_TELEPHONE=C
+  export LC_MEASUREMENT=C
+  export LC_IDENTIFICATION=C
+fi
+export LC_COLLATE=C
+
+# shellcheck source=/dev/null
+test -e "$HOME/.localenv" && . "$HOME/.localenv"

dotfiles/gdbinit

@@ -22,5 +22,22 @@ define reg
   info registers
 end
 
-source ~/.peda/peda.py
-source ~/.gdbinit.local
+# Fancy sourcing of modules
+python
+import sys
+import os.path
+gef = os.path.expanduser('~/tools/gef/gef.py')
+pwndbg = os.path.expanduser('~/tools/pwndbg/gdbinit.py')
+peda = os.path.expanduser('~/.peda/peda.py')
+if os.path.isfile(gef):
+  gdb.execute('source {}'.format(gef))
+elif os.path.isfile(pwndbg):
+  sys.path.insert(0, os.path.expanduser('~/tools/pwndbg/vendor'))
+  gdb.execute('source {}'.format(pwndbg))
+elif os.path.isfile(peda):
+  gdb.execute('source {}'.format(peda))
+
+local_init = os.path.expanduser('~/.gdbinit.local')
+if os.path.isfile(local_init):
+  gdb.execute('source {}'.format(local_init))
+end

dotfiles/gef.rc

@@ -0,0 +1,125 @@
+[context]
+clear_screen = False
+enable = True
+grow_stack_down = False
+ignore_registers = 
+layout = legend regs stack code args source memory threads trace extra
+nb_lines_backtrace = 10
+nb_lines_code = 6
+nb_lines_code_prev = 3
+nb_lines_stack = 8
+nb_lines_threads = -1
+peek_calls = True
+peek_ret = True
+redirect = 
+show_registers_raw = False
+show_stack_raw = False
+
+[dereference]
+max_recursion = 7
+
+[entry-break]
+entrypoint_symbols = main _main __libc_start_main __uClibc_main start _start
+
+[gef-remote]
+clean_on_exit = False
+
+[gef]
+autosave_breakpoints_file = 
+debug = False
+disable_color = False
+extra_plugins_dir = 
+follow_child = True
+readline_compat = False
+
+[got]
+function_not_resolved = yellow
+function_resolved = green
+
+[heap-analysis-helper]
+check_double_free = True
+check_free_null = False
+check_heap_overlap = True
+check_uaf = True
+check_weird_free = True
+
+[heap-chunks]
+peek_nb_byte = 16
+
+[hexdump]
+always_show_ascii = False
+
+[highlight]
+regex = False
+
+[ida-interact]
+host = 127.0.0.1
+port = 1337
+sync_cursor = False
+
+[pattern]
+length = 1024
+
+[pcustom]
+struct_path = /tmp/gef/structs
+
+[process-search]
+ps_command = /bin/ps auxww
+
+[syscall-args]
+path = /tmp/gef/syscall-tables
+
+[theme]
+address_code = red
+address_heap = green
+address_stack = pink
+context_title_line = gray
+context_title_message = cyan
+default_title_line = gray
+default_title_message = cyan
+dereference_base_address = cyan
+dereference_code = gray
+dereference_register_value = bold blue
+dereference_string = yellow
+disassemble_current_instruction = green
+registers_register_name = blue
+registers_value_changed = bold red
+source_current_line = green
+table_heading = blue
+
+[trace-run]
+max_tracing_recursion = 1
+tracefile_prefix = ./gef-trace-
+
+[aliases]
+pf = print-format
+status = process-status
+binaryninja-interact = ida-interact
+bn = ida-interact
+binja = ida-interact
+lookup = scan
+grep = search-pattern
+xref = search-pattern
+flags = edit-flags
+sc-search = shellcode search
+sc-get = shellcode get
+ps = process-search
+start = entry-break
+nb = name-break
+ctx = context
+telescope = dereference
+pattern offset = pattern search
+hl = highlight
+highlight ls = highlight list
+hll = highlight list
+hlc = highlight clear
+highlight set = highlight add
+hla = highlight add
+highlight delete = highlight remove
+highlight del = highlight remove
+highlight unset = highlight remove
+highlight rm = highlight remove
+hlr = highlight remove
+fmtstr-helper = format-string-helper
+screen-setup = tmux-setup
+

dotfiles/gitconfig

@@ -39,11 +39,13 @@
   user = matir
 
 # Site specific config
-[url "https://github.com/"]
-  insteadOf = github://
+[url "https://github.com./"]
+  insteadOf = "github:"
+  insteadOf = "github://"
 
 [url "ssh://git@github.com/"]
-  pushInsteadOf = github://
+  pushInsteadOf = "github:"
+  pushInsteadOf = "github://"
 
 [url "git://gist.github.com/"]
 	insteadOf = "gist:"
@@ -51,5 +53,13 @@
 [url "git@gist.github.com:"]
 	pushInsteadOf = "gist:"
 	pushInsteadOf = "git://gist.github.com/"
+
 [credential]
 	helper = cache --timeout=36000
+[receive]
+	denyCurrentBranch = updateInstead
+[merge]
+	tool = vimdiff
+	conflictstyle = diff3
+[mergetool]
+	prompt = false

dotfiles/gitignore

@@ -17,3 +17,6 @@ Thumbs.db
 # Try to avoid accidentally checking in private keys
 id_rsa
 id_ecdsa
+
+# Kicad backup files
+*.kicad_pcb-bak

dotfiles/gnupg/dirmngr.conf

@@ -0,0 +1 @@
+keyserver hkps://keys.openpgp.org

dotfiles/gnupg/gpg-agent.conf

@@ -1,6 +1,5 @@
-enable-ssh-support
-use-standard-socket
 default-cache-ttl 7200
 default-cache-ttl-ssh 7200
 max-cache-ttl 86400
 max-cache-ttl-ssh 86400
+enable-ssh-support

dotfiles/gnupg/gpg.conf

@@ -1,10 +1,10 @@
 use-agent
 # HKPS requires gnupg-curl for gpg1
-keyserver hkps://hkps.pool.sks-keyservers.net
-# Unfortunately, the path must be fully-qualified
-keyserver-options auto-key-retrieve ca-cert-file=/home/david/.gnupg/sks-keyservers.pem
+keyserver hkps://keys.openpgp.org
+keyserver-options auto-key-retrieve no-honor-keyserver-url
 auto-key-locate keyserver
 personal-digest-preferences SHA256
 cert-digest-algo SHA256
 default-preference-list SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed
 cipher-algo AES256
+default-key 7FD58D9A196DCEEEAD671F94F4D7A7915DEA789B

dotfiles/inputrc

@@ -0,0 +1,4 @@
+set editing-mode vi
+
+set keymap vi
+set convert-meta on

dotfiles/ipython.py

@@ -0,0 +1,7 @@
+try:
+    import os, IPython
+    os.environ['PYTHONSTARTUP'] = ''  # Prevent running this again
+    IPython.start_ipython()
+    raise SystemExit
+except ImportError:
+    pass

dotfiles/ipython/profile_default/ipython_config.py

@@ -0,0 +1,611 @@
+# Configuration file for ipython.
+
+#------------------------------------------------------------------------------
+# InteractiveShellApp(Configurable) configuration
+#------------------------------------------------------------------------------
+
+## A Mixin for applications that start InteractiveShell instances.
+#  
+#  Provides configurables for loading extensions and executing files as part of
+#  configuring a Shell environment.
+#  
+#  The following methods should be called by the :meth:`initialize` method of the
+#  subclass:
+#  
+#    - :meth:`init_path`
+#    - :meth:`init_shell` (to be implemented by the subclass)
+#    - :meth:`init_gui_pylab`
+#    - :meth:`init_extensions`
+#    - :meth:`init_code`
+
+## Execute the given command string.
+#c.InteractiveShellApp.code_to_run = ''
+
+## Run the file referenced by the PYTHONSTARTUP environment variable at IPython
+#  startup.
+c.InteractiveShellApp.exec_PYTHONSTARTUP = False
+
+## List of files to run at IPython startup.
+#c.InteractiveShellApp.exec_files = []
+
+## lines of code to run at IPython startup.
+#c.InteractiveShellApp.exec_lines = []
+
+## A list of dotted module names of IPython extensions to load.
+#c.InteractiveShellApp.extensions = []
+
+## dotted module name of an IPython extension to load.
+#c.InteractiveShellApp.extra_extension = ''
+
+## A file to be run
+#c.InteractiveShellApp.file_to_run = ''
+
+## Enable GUI event loop integration with any of ('glut', 'gtk', 'gtk2', 'gtk3',
+#  'osx', 'pyglet', 'qt', 'qt4', 'qt5', 'tk', 'wx', 'gtk2', 'qt4').
+#c.InteractiveShellApp.gui = None
+
+## Should variables loaded at startup (by startup files, exec_lines, etc.) be
+#  hidden from tools like %who?
+#c.InteractiveShellApp.hide_initial_ns = True
+
+## Configure matplotlib for interactive use with the default matplotlib backend.
+#c.InteractiveShellApp.matplotlib = None
+
+## Run the module as a script.
+#c.InteractiveShellApp.module_to_run = ''
+
+## Pre-load matplotlib and numpy for interactive use, selecting a particular
+#  matplotlib backend and loop integration.
+#c.InteractiveShellApp.pylab = None
+
+## If true, IPython will populate the user namespace with numpy, pylab, etc. and
+#  an ``import *`` is done from numpy and pylab, when using pylab mode.
+#  
+#  When False, pylab mode should not import any names into the user namespace.
+#c.InteractiveShellApp.pylab_import_all = True
+
+## Reraise exceptions encountered loading IPython extensions?
+#c.InteractiveShellApp.reraise_ipython_extension_failures = False
+
+#------------------------------------------------------------------------------
+# Application(SingletonConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## This is an application.
+
+## The date format used by logging formatters for %(asctime)s
+#c.Application.log_datefmt = '%Y-%m-%d %H:%M:%S'
+
+## The Logging format template
+#c.Application.log_format = '[%(name)s]%(highlevel)s %(message)s'
+
+## Set the log level by value or name.
+#c.Application.log_level = 30
+
+#------------------------------------------------------------------------------
+# BaseIPythonApplication(Application) configuration
+#------------------------------------------------------------------------------
+
+## IPython: an enhanced interactive Python shell.
+
+## Whether to create profile dir if it doesn't exist
+#c.BaseIPythonApplication.auto_create = False
+
+## Whether to install the default config files into the profile dir. If a new
+#  profile is being created, and IPython contains config files for that profile,
+#  then they will be staged into the new directory.  Otherwise, default config
+#  files will be automatically generated.
+#c.BaseIPythonApplication.copy_config_files = False
+
+## Path to an extra config file to load.
+#  
+#  If specified, load this config file in addition to any other IPython config.
+#c.BaseIPythonApplication.extra_config_file = ''
+
+## The name of the IPython directory. This directory is used for logging
+#  configuration (through profiles), history storage, etc. The default is usually
+#  $HOME/.ipython. This option can also be specified through the environment
+#  variable IPYTHONDIR.
+#c.BaseIPythonApplication.ipython_dir = ''
+
+## Whether to overwrite existing config files when copying
+#c.BaseIPythonApplication.overwrite = False
+
+## The IPython profile to use.
+#c.BaseIPythonApplication.profile = 'default'
+
+## Create a massive crash report when IPython encounters what may be an internal
+#  error.  The default is to append a short message to the usual traceback
+#c.BaseIPythonApplication.verbose_crash = False
+
+#------------------------------------------------------------------------------
+# TerminalIPythonApp(BaseIPythonApplication,InteractiveShellApp) configuration
+#------------------------------------------------------------------------------
+
+## Whether to display a banner upon starting IPython.
+#c.TerminalIPythonApp.display_banner = True
+
+## If a command or file is given via the command-line, e.g. 'ipython foo.py',
+#  start an interactive shell after executing the file or command.
+#c.TerminalIPythonApp.force_interact = False
+
+## Class to use to instantiate the TerminalInteractiveShell object. Useful for
+#  custom Frontends
+#c.TerminalIPythonApp.interactive_shell_class = 'IPython.terminal.interactiveshell.TerminalInteractiveShell'
+
+## Start IPython quickly by skipping the loading of config files.
+#c.TerminalIPythonApp.quick = False
+
+#------------------------------------------------------------------------------
+# InteractiveShell(SingletonConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## An enhanced, interactive shell for Python.
+
+## 'all', 'last', 'last_expr' or 'none', 'last_expr_or_assign' specifying which
+#  nodes should be run interactively (displaying output from expressions).
+#c.InteractiveShell.ast_node_interactivity = 'last_expr'
+
+## A list of ast.NodeTransformer subclass instances, which will be applied to
+#  user input before code is run.
+#c.InteractiveShell.ast_transformers = []
+
+## Automatically run await statement in the top level repl.
+#c.InteractiveShell.autoawait = True
+
+## Make IPython automatically call any callable object even if you didn't type
+#  explicit parentheses. For example, 'str 43' becomes 'str(43)' automatically.
+#  The value can be '0' to disable the feature, '1' for 'smart' autocall, where
+#  it is not applied if there are no more arguments on the line, and '2' for
+#  'full' autocall, where all callable objects are automatically called (even if
+#  no arguments are present).
+#c.InteractiveShell.autocall = 0
+
+## Autoindent IPython code entered interactively.
+#c.InteractiveShell.autoindent = True
+
+## Enable magic commands to be called without the leading %.
+#c.InteractiveShell.automagic = True
+
+## The part of the banner to be printed before the profile
+#c.InteractiveShell.banner1 = "Python 3.7.3rc1 (default, Mar 13 2019, 11:01:15) \nType 'copyright', 'credits' or 'license' for more information\nIPython 7.5.0 -- An enhanced Interactive Python. Type '?' for help.\n"
+
+## The part of the banner to be printed after the profile
+#c.InteractiveShell.banner2 = ''
+
+## Set the size of the output cache.  The default is 1000, you can change it
+#  permanently in your config file.  Setting it to 0 completely disables the
+#  caching system, and the minimum value accepted is 3 (if you provide a value
+#  less than 3, it is reset to 0 and a warning is issued).  This limit is defined
+#  because otherwise you'll spend more time re-flushing a too small cache than
+#  working
+#c.InteractiveShell.cache_size = 1000
+
+## Use colors for displaying information about objects. Because this information
+#  is passed through a pager (like 'less'), and some pagers get confused with
+#  color codes, this capability can be turned off.
+#c.InteractiveShell.color_info = True
+
+## Set the color scheme (NoColor, Neutral, Linux, or LightBG).
+#c.InteractiveShell.colors = 'Neutral'
+
+## 
+#c.InteractiveShell.debug = False
+
+## Don't call post-execute functions that have failed in the past.
+#c.InteractiveShell.disable_failing_post_execute = False
+
+## If True, anything that would be passed to the pager will be displayed as
+#  regular output instead.
+#c.InteractiveShell.display_page = False
+
+## (Provisional API) enables html representation in mime bundles sent to pagers.
+#c.InteractiveShell.enable_html_pager = False
+
+## Total length of command history
+#c.InteractiveShell.history_length = 10000
+
+## The number of saved history entries to be loaded into the history buffer at
+#  startup.
+#c.InteractiveShell.history_load_length = 1000
+
+## 
+#c.InteractiveShell.ipython_dir = ''
+
+## Start logging to the given file in append mode. Use `logfile` to specify a log
+#  file to **overwrite** logs to.
+#c.InteractiveShell.logappend = ''
+
+## The name of the logfile to use.
+#c.InteractiveShell.logfile = ''
+
+## Start logging to the default log file in overwrite mode. Use `logappend` to
+#  specify a log file to **append** logs to.
+#c.InteractiveShell.logstart = False
+
+## Select the loop runner that will be used to execute top-level asynchronous
+#  code
+#c.InteractiveShell.loop_runner = 'IPython.core.interactiveshell._asyncio_runner'
+
+## 
+#c.InteractiveShell.object_info_string_level = 0
+
+## Automatically call the pdb debugger after every exception.
+#c.InteractiveShell.pdb = False
+
+## Deprecated since IPython 4.0 and ignored since 5.0, set
+#  TerminalInteractiveShell.prompts object directly.
+#c.InteractiveShell.prompt_in1 = 'In [\\#]: '
+
+## Deprecated since IPython 4.0 and ignored since 5.0, set
+#  TerminalInteractiveShell.prompts object directly.
+#c.InteractiveShell.prompt_in2 = '   .\\D.: '
+
+## Deprecated since IPython 4.0 and ignored since 5.0, set
+#  TerminalInteractiveShell.prompts object directly.
+#c.InteractiveShell.prompt_out = 'Out[\\#]: '
+
+## Deprecated since IPython 4.0 and ignored since 5.0, set
+#  TerminalInteractiveShell.prompts object directly.
+#c.InteractiveShell.prompts_pad_left = True
+
+## 
+#c.InteractiveShell.quiet = False
+
+## 
+#c.InteractiveShell.separate_in = '\n'
+
+## 
+#c.InteractiveShell.separate_out = ''
+
+## 
+#c.InteractiveShell.separate_out2 = ''
+
+## Show rewritten input, e.g. for autocall.
+#c.InteractiveShell.show_rewritten_input = True
+
+## Enables rich html representation of docstrings. (This requires the docrepr
+#  module).
+#c.InteractiveShell.sphinxify_docstring = False
+
+## 
+#c.InteractiveShell.wildcards_case_sensitive = True
+
+## Switch modes for the IPython exception handlers.
+#c.InteractiveShell.xmode = 'Context'
+
+#------------------------------------------------------------------------------
+# TerminalInteractiveShell(InteractiveShell) configuration
+#------------------------------------------------------------------------------
+
+## Set to confirm when you try to exit IPython with an EOF (Control-D in Unix,
+#  Control-Z/Enter in Windows). By typing 'exit' or 'quit', you can force a
+#  direct exit without any confirmation.
+#c.TerminalInteractiveShell.confirm_exit = True
+
+## Options for displaying tab completions, 'column', 'multicolumn', and
+#  'readlinelike'. These options are for `prompt_toolkit`, see `prompt_toolkit`
+#  documentation for more information.
+#c.TerminalInteractiveShell.display_completions = 'multicolumn'
+
+## Shortcut style to use at the prompt. 'vi' or 'emacs'.
+c.TerminalInteractiveShell.editing_mode = 'vi'
+
+## Set the editor used by IPython (default to $EDITOR/vi/notepad).
+#c.TerminalInteractiveShell.editor = 'vim'
+
+## Allows to enable/disable the prompt toolkit history search
+#c.TerminalInteractiveShell.enable_history_search = True
+
+## Enable vi (v) or Emacs (C-X C-E) shortcuts to open an external editor. This is
+#  in addition to the F2 binding, which is always enabled.
+#c.TerminalInteractiveShell.extra_open_editor_shortcuts = False
+
+## Provide an alternative handler to be called when the user presses Return. This
+#  is an advanced option intended for debugging, which may be changed or removed
+#  in later releases.
+#c.TerminalInteractiveShell.handle_return = None
+
+## Highlight matching brackets.
+#c.TerminalInteractiveShell.highlight_matching_brackets = True
+
+## The name or class of a Pygments style to use for syntax highlighting. To see
+#  available styles, run `pygmentize -L styles`.
+#c.TerminalInteractiveShell.highlighting_style = traitlets.Undefined
+
+## Override highlighting format for specific tokens
+#c.TerminalInteractiveShell.highlighting_style_overrides = {}
+
+## Enable mouse support in the prompt (Note: prevents selecting text with the
+#  mouse)
+#c.TerminalInteractiveShell.mouse_support = False
+
+## Display the current vi mode (when using vi editing mode).
+#c.TerminalInteractiveShell.prompt_includes_vi_mode = True
+
+## Class used to generate Prompt token for prompt_toolkit
+#c.TerminalInteractiveShell.prompts_class = 'IPython.terminal.prompts.Prompts'
+
+## Use `raw_input` for the REPL, without completion and prompt colors.
+#  
+#  Useful when controlling IPython as a subprocess, and piping STDIN/OUT/ERR.
+#  Known usage are: IPython own testing machinery, and emacs inferior-shell
+#  integration through elpy.
+#  
+#  This mode default to `True` if the `IPY_TEST_SIMPLE_PROMPT` environment
+#  variable is set, or the current terminal is not a tty.
+#c.TerminalInteractiveShell.simple_prompt = False
+
+## Number of line at the bottom of the screen to reserve for the completion menu
+#c.TerminalInteractiveShell.space_for_menu = 6
+
+## Automatically set the terminal title
+#c.TerminalInteractiveShell.term_title = True
+
+## Customize the terminal title format.  This is a python format string.
+#  Available substitutions are: {cwd}.
+#c.TerminalInteractiveShell.term_title_format = 'IPython: {cwd}'
+
+## Use 24bit colors instead of 256 colors in prompt highlighting. If your
+#  terminal supports true color, the following command should print 'TRUECOLOR'
+#  in orange: printf "\x1b[38;2;255;100;0mTRUECOLOR\x1b[0m\n"
+#c.TerminalInteractiveShell.true_color = False
+
+#------------------------------------------------------------------------------
+# HistoryAccessor(HistoryAccessorBase) configuration
+#------------------------------------------------------------------------------
+
+## Access the history database without adding to it.
+#  
+#  This is intended for use by standalone history tools. IPython shells use
+#  HistoryManager, below, which is a subclass of this.
+
+## Options for configuring the SQLite connection
+#  
+#  These options are passed as keyword args to sqlite3.connect when establishing
+#  database connections.
+#c.HistoryAccessor.connection_options = {}
+
+## enable the SQLite history
+#  
+#  set enabled=False to disable the SQLite history, in which case there will be
+#  no stored history, no SQLite connection, and no background saving thread.
+#  This may be necessary in some threaded environments where IPython is embedded.
+#c.HistoryAccessor.enabled = True
+
+## Path to file to use for SQLite history database.
+#  
+#  By default, IPython will put the history database in the IPython profile
+#  directory.  If you would rather share one history among profiles, you can set
+#  this value in each, so that they are consistent.
+#  
+#  Due to an issue with fcntl, SQLite is known to misbehave on some NFS mounts.
+#  If you see IPython hanging, try setting this to something on a local disk,
+#  e.g::
+#  
+#      ipython --HistoryManager.hist_file=/tmp/ipython_hist.sqlite
+#  
+#  you can also use the specific value `:memory:` (including the colon at both
+#  end but not the back ticks), to avoid creating an history file.
+#c.HistoryAccessor.hist_file = ''
+
+#------------------------------------------------------------------------------
+# HistoryManager(HistoryAccessor) configuration
+#------------------------------------------------------------------------------
+
+## A class to organize all history-related functionality in one place.
+
+## Write to database every x commands (higher values save disk access & power).
+#  Values of 1 or less effectively disable caching.
+#c.HistoryManager.db_cache_size = 0
+
+## Should the history database include output? (default: no)
+#c.HistoryManager.db_log_output = False
+
+#------------------------------------------------------------------------------
+# ProfileDir(LoggingConfigurable) configuration
+#------------------------------------------------------------------------------
+
+## An object to manage the profile directory and its resources.
+#  
+#  The profile directory is used by all IPython applications, to manage
+#  configuration, logging and security.
+#  
+#  This object knows how to find, create and manage these directories. This
+#  should be used by any code that wants to handle profiles.
+
+## Set the profile location directly. This overrides the logic used by the
+#  `profile` option.
+#c.ProfileDir.location = ''
+
+#------------------------------------------------------------------------------
+# BaseFormatter(Configurable) configuration
+#------------------------------------------------------------------------------
+
+## A base formatter class that is configurable.
+#  
+#  This formatter should usually be used as the base class of all formatters. It
+#  is a traited :class:`Configurable` class and includes an extensible API for
+#  users to determine how their objects are formatted. The following logic is
+#  used to find a function to format an given object.
+#  
+#  1. The object is introspected to see if it has a method with the name
+#     :attr:`print_method`. If is does, that object is passed to that method
+#     for formatting.
+#  2. If no print method is found, three internal dictionaries are consulted
+#     to find print method: :attr:`singleton_printers`, :attr:`type_printers`
+#     and :attr:`deferred_printers`.
+#  
+#  Users should use these dictionaries to register functions that will be used to
+#  compute the format data for their objects (if those objects don't have the
+#  special print methods). The easiest way of using these dictionaries is through
+#  the :meth:`for_type` and :meth:`for_type_by_name` methods.
+#  
+#  If no function/callable is found to compute the format data, ``None`` is
+#  returned and this format type is not used.
+
+## 
+#c.BaseFormatter.deferred_printers = {}
+
+## 
+#c.BaseFormatter.enabled = True
+
+## 
+#c.BaseFormatter.singleton_printers = {}
+
+## 
+#c.BaseFormatter.type_printers = {}
+
+#------------------------------------------------------------------------------
+# PlainTextFormatter(BaseFormatter) configuration
+#------------------------------------------------------------------------------
+
+## The default pretty-printer.
+#  
+#  This uses :mod:`IPython.lib.pretty` to compute the format data of the object.
+#  If the object cannot be pretty printed, :func:`repr` is used. See the
+#  documentation of :mod:`IPython.lib.pretty` for details on how to write pretty
+#  printers.  Here is a simple example::
+#  
+#      def dtype_pprinter(obj, p, cycle):
+#          if cycle:
+#              return p.text('dtype(...)')
+#          if hasattr(obj, 'fields'):
+#              if obj.fields is None:
+#                  p.text(repr(obj))
+#              else:
+#                  p.begin_group(7, 'dtype([')
+#                  for i, field in enumerate(obj.descr):
+#                      if i > 0:
+#                          p.text(',')
+#                          p.breakable()
+#                      p.pretty(field)
+#                  p.end_group(7, '])')
+
+## 
+#c.PlainTextFormatter.float_precision = ''
+
+## Truncate large collections (lists, dicts, tuples, sets) to this size.
+#  
+#  Set to 0 to disable truncation.
+#c.PlainTextFormatter.max_seq_length = 1000
+
+## 
+#c.PlainTextFormatter.max_width = 79
+
+## 
+#c.PlainTextFormatter.newline = '\n'
+
+## 
+#c.PlainTextFormatter.pprint = True
+
+## 
+#c.PlainTextFormatter.verbose = False
+
+#------------------------------------------------------------------------------
+# Completer(Configurable) configuration
+#------------------------------------------------------------------------------
+
+## Enable unicode completions, e.g. \alpha<tab> . Includes completion of latex
+#  commands, unicode names, and expanding unicode characters back to latex
+#  commands.
+#c.Completer.backslash_combining_completions = True
+
+## Enable debug for the Completer. Mostly print extra information for
+#  experimental jedi integration.
+#c.Completer.debug = False
+
+## Activate greedy completion PENDING DEPRECTION. this is now mostly taken care
+#  of with Jedi.
+#  
+#  This will enable completion on elements of lists, results of function calls,
+#  etc., but can be unsafe because the code is actually evaluated on TAB.
+#c.Completer.greedy = False
+
+## Experimental: restrict time (in milliseconds) during which Jedi can compute
+#  types. Set to 0 to stop computing types. Non-zero value lower than 100ms may
+#  hurt performance by preventing jedi to build its cache.
+#c.Completer.jedi_compute_type_timeout = 400
+
+## Experimental: Use Jedi to generate autocompletions. Default to True if jedi is
+#  installed.
+#c.Completer.use_jedi = True
+
+#------------------------------------------------------------------------------
+# IPCompleter(Completer) configuration
+#------------------------------------------------------------------------------
+
+## Extension of the completer class with IPython-specific features
+
+## DEPRECATED as of version 5.0.
+#  
+#  Instruct the completer to use __all__ for the completion
+#  
+#  Specifically, when completing on ``object.<tab>``.
+#  
+#  When True: only those names in obj.__all__ will be included.
+#  
+#  When False [default]: the __all__ attribute is ignored
+#c.IPCompleter.limit_to__all__ = False
+
+## Whether to merge completion results into a single list
+#  
+#  If False, only the completion results from the first non-empty completer will
+#  be returned.
+#c.IPCompleter.merge_completions = True
+
+## Instruct the completer to omit private method names
+#  
+#  Specifically, when completing on ``object.<tab>``.
+#  
+#  When 2 [default]: all names that start with '_' will be excluded.
+#  
+#  When 1: all 'magic' names (``__foo__``) will be excluded.
+#  
+#  When 0: nothing will be excluded.
+#c.IPCompleter.omit__names = 2
+
+#------------------------------------------------------------------------------
+# ScriptMagics(Magics) configuration
+#------------------------------------------------------------------------------
+
+## Magics for talking to scripts
+#  
+#  This defines a base `%%script` cell magic for running a cell with a program in
+#  a subprocess, and registers a few top-level magics that call %%script with
+#  common interpreters.
+
+## Extra script cell magics to define
+#  
+#  This generates simple wrappers of `%%script foo` as `%%foo`.
+#  
+#  If you want to add script magics that aren't on your path, specify them in
+#  script_paths
+#c.ScriptMagics.script_magics = []
+
+## Dict mapping short 'ruby' names to full paths, such as '/opt/secret/bin/ruby'
+#  
+#  Only necessary for items in script_magics where the default path will not find
+#  the right interpreter.
+#c.ScriptMagics.script_paths = {}
+
+#------------------------------------------------------------------------------
+# LoggingMagics(Magics) configuration
+#------------------------------------------------------------------------------
+
+## Magics related to all logging machinery.
+
+## Suppress output of log state when logging is enabled
+#c.LoggingMagics.quiet = False
+
+#------------------------------------------------------------------------------
+# StoreMagics(Magics) configuration
+#------------------------------------------------------------------------------
+
+## Lightweight persistence for python variables.
+#  
+#  Provides the %store magic.
+
+## If True, any %store-d variables will be automatically restored when IPython
+#  starts.
+#c.StoreMagics.autorestore = False

dotfiles/lldbinit

@@ -0,0 +1,6 @@
+settings set prompt "(lisa)"
+settings set target.x86-disassembly-flavor intel
+command script import ~/lisa.py
+command script import lldb
+command script add -f lisa.alias lisa
+lisa

dotfiles/profile

@@ -1,13 +1,29 @@
-# Setup GPG Agent
-GPG_AGENT_INFO_PATH=$HOME/.gnupg/gpg-agent-info-`hostname`
-if test -f $GPG_AGENT_INFO_PATH && kill -0 `cut -d: -f 2 $GPG_AGENT_INFO_PATH` 2>/dev/null ; then
-  . $GPG_AGENT_INFO_PATH
-  export GPG_AGENT_INFO SSH_AUTH_SOCK SSH_AGENT_PID
+#!/bin/bash
+# Also sourced by zsh, etc.
+# Interactive shells only.
+# Should only use POSIX constructs.
+
+# Always load ENV
+test -f "$HOME/.env" && . "$HOME/.env"
+
+# Setup GREP_COLORS
+export GREP_COLOR='01;31'
+export GREP_COLORS='mt=01;31:mc=01;31:ms=01;31'
+
+# Setup LS_COLORS
+if whence dircolors >/dev/null 2>&1 ; then
+  test -f "${HOME}/.dircolors" && \
+  eval "$(dircolors "${HOME}/.dircolors")"
 else
-  if which gpg-agent >/dev/null 2>&1 ; then
-    gpg-agent -q 2>/dev/null || eval `gpg-agent --daemon --enable-ssh-support --write-env-file $GPG_AGENT_INFO_PATH` 2>/dev/null
-  fi
+# Static solarized LS_COLORS
+  LS_COLORS='no=00:fi=00:di=34:ow=34;40:ln=35:pi=30;44:so=35;44:do=35;44:bd=33;44:cd=37;44:or=05;37;41:mi=05;37;41:ex=01;31:*.cmd=01;31:*.exe=01;31:*.com=01;31:*.bat=01;31:*.reg=01;31:*.app=01;31:*.txt=32:*.org=32:*.md=32:*.mkd=32:*.h=32:*.hpp=32:*.c=32:*.C=32:*.cc=32:*.cpp=32:*.cxx=32:*.objc=32:*.cl=32:*.sh=32:*.bash=32:*.csh=32:*.zsh=32:*.el=32:*.vim=32:*.java=32:*.pl=32:*.pm=32:*.py=32:*.rb=32:*.hs=32:*.php=32:*.htm=32:*.html=32:*.shtml=32:*.erb=32:*.haml=32:*.xml=32:*.rdf=32:*.css=32:*.sass=32:*.scss=32:*.less=32:*.js=32:*.coffee=32:*.man=32:*.0=32:*.1=32:*.2=32:*.3=32:*.4=32:*.5=32:*.6=32:*.7=32:*.8=32:*.9=32:*.l=32:*.n=32:*.p=32:*.pod=32:*.tex=32:*.go=32:*.sql=32:*.csv=32:*.sv=32:*.svh=32:*.v=32:*.vh=32:*.vhd=32:*.bmp=33:*.cgm=33:*.dl=33:*.dvi=33:*.emf=33:*.eps=33:*.gif=33:*.jpeg=33:*.jpg=33:*.JPG=33:*.mng=33:*.pbm=33:*.pcx=33:*.pdf=33:*.pgm=33:*.png=33:*.PNG=33:*.ppm=33:*.pps=33:*.ppsx=33:*.ps=33:*.svg=33:*.svgz=33:*.tga=33:*.tif=33:*.tiff=33:*.xbm=33:*.xcf=33:*.xpm=33:*.xwd=33:*.xwd=33:*.yuv=33:*.aac=33:*.au=33:*.flac=33:*.m4a=33:*.mid=33:*.midi=33:*.mka=33:*.mp3=33:*.mpa=33:*.mpeg=33:*.mpg=33:*.ogg=33:*.opus=33:*.ra=33:*.wav=33:*.anx=33:*.asf=33:*.avi=33:*.axv=33:*.flc=33:*.fli=33:*.flv=33:*.gl=33:*.m2v=33:*.m4v=33:*.mkv=33:*.mov=33:*.MOV=33:*.mp4=33:*.mp4v=33:*.mpeg=33:*.mpg=33:*.nuv=33:*.ogm=33:*.ogv=33:*.ogx=33:*.qt=33:*.rm=33:*.rmvb=33:*.swf=33:*.vob=33:*.webm=33:*.wmv=33:*.doc=31:*.docx=31:*.rtf=31:*.odt=31:*.dot=31:*.dotx=31:*.ott=31:*.xls=31:*.xlsx=31:*.ods=31:*.ots=31:*.ppt=31:*.pptx=31:*.odp=31:*.otp=31:*.fla=31:*.psd=31:*.7z=1;35:*.apk=1;35:*.arj=1;35:*.bin=1;35:*.bz=1;35:*.bz2=1;35:*.cab=1;35:*.deb=1;35:*.dmg=1;35:*.gem=1;35:*.gz=1;35:*.iso=1;35:*.jar=1;35:*.msi=1;35:*.rar=1;35:*.rpm=1;35:*.tar=1;35:*.tbz=1;35:*.tbz2=1;35:*.tgz=1;35:*.tx=1;35:*.war=1;35:*.xpi=1;35:*.xz=1;35:*.z=1;35:*.Z=1;35:*.zip=1;35:*.ANSI-30-black=30:*.ANSI-01;30-brblack=01;30:*.ANSI-31-red=31:*.ANSI-01;31-brred=01;31:*.ANSI-32-green=32:*.ANSI-01;32-brgreen=01;32:*.ANSI-33-yellow=33:*.ANSI-01;33-bryellow=01;33:*.ANSI-34-blue=34:*.ANSI-01;34-brblue=01;34:*.ANSI-35-magenta=35:*.ANSI-01;35-brmagenta=01;35:*.ANSI-36-cyan=36:*.ANSI-01;36-brcyan=01;36:*.ANSI-37-white=37:*.ANSI-01;37-brwhite=01;37:*.log=01;32:*~=01;32:*#=01;32:*.bak=01;33:*.BAK=01;33:*.old=01;33:*.OLD=01;33:*.org_archive=01;33:*.off=01;33:*.OFF=01;33:*.dist=01;33:*.DIST=01;33:*.orig=01;33:*.ORIG=01;33:*.swp=01;33:*.swo=01;33:*,v=01;33:*.gpg=34:*.gpg=34:*.pgp=34:*.asc=34:*.3des=34:*.aes=34:*.enc=34:*.sqlite=34:';
+  export LS_COLORS
 fi
-unset GPG_AGENT_INFO_PATH
-export GPG_TTY=`tty`
-# End GPG
+if [ "$(uname)" = "Darwin" ] ; then
+  LSCOLORS="gxfxbEaEBxxEhEhBaDaCaD"
+  export LSCOLORS
+  CLICOLOR=1
+  export CLICOLOR
+fi
+
+test -f "${HOME}/.profile.local" && . "${HOME}/.profile.local"

dotfiles/rsync_ignore

@@ -5,3 +5,9 @@ Downloads
 .wine
 .thumbnails
 .histfile
+.zcompdump
+.zcompdump*
+.sqlite_history
+VirtualBox VMs
+Audits
+SpiderOak Hive

dotfiles/rvmrc

@@ -0,0 +1 @@
+rvm_silence_path_mismatch_check_flag=1

dotfiles/sqliterc

@@ -0,0 +1,2 @@
+.header on
+.mode column

dotfiles/ssh/config

@@ -1,14 +1,28 @@
-# Universal Settings (can't override)
-# Never fall back to protocol 1: it's broken
+# Universal Settings
 Protocol 2
 
+# Permit Local Overrides
+Include ~/.ssh/config.d/*
+
+# Enable canonicalization, unless overridden
+CanonicalizeHostname        yes
+CanonicalizeFallbackLocal   yes
+CanonicalDomains            systemoverlord.com
+CanonicalizeMaxDots         0
+
 # Defaults (May be Overridden)
-Host *
-	ControlMaster 	auto
-	ControlPath		~/.ssh/master/%r@%h:%p
-	ControlPersist	yes
-	ForwardAgent	no
-	ForwardX11		no
-	ForwardX11Trusted	no
-	ServerAliveInterval 120
-	CheckHostIP no
+Host *.*
+  CheckHostIP                 yes
+
+Match canonical all
+  CheckHostIP                 no
+  ControlMaster               auto
+  ControlPath                 ~/.ssh/master/%r@%h:%p
+  ControlPersist              yes
+  ForwardAgent                no
+  ForwardX11                  no
+  ForwardX11Trusted           no
+  ServerAliveInterval         120
+  UpdateHostKeys              yes
+  User                        david
+  VerifyHostKeyDNS            yes

dotfiles/ssh/rc

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+REMOTE_LINK="${HOME}/.ssh/remote_agent.sock"
+
+if test \! -L "${REMOTE_LINK}" -a -n "${SSH_AUTH_SOCK}" ; then
+  ln -sf "${SSH_AUTH_SOCK}" "${REMOTE_LINK}"
+fi

dotfiles/tmux.conf

@@ -14,14 +14,14 @@ set -g history-limit 10000
 set -g base-index 1
 set -g pane-base-index 1
 
-# Let us use utf-8 drawing characters to make tab-like window formats
-setw -g utf8 on
-set -g status-utf8 on
-
 # Terminal emulator window title
 set -g set-titles on
 set -g set-titles-string '#h:#S:#I.#P #W'
 
+# Set keybindings
+set -g mode-keys vi
+set -g status-keys vi
+
 # Set a 256color $TERM variable so programs inside tmux know they can use 256
 # colors
 set -g default-terminal screen-256color
@@ -37,9 +37,7 @@ setw -g automatic-rename on
 source-file ~/.tmux/tmux-solarized-256.conf
 
 # Provide a statusbar
-set -g window-status-current-bg colour33
-set -g window-status-current-fg colour235
-set -g window-status-current-attr bold
+set -g window-status-current-style fg=colour235,bg=colour33,bold
 set -g status-interval 60
 set -g status-left-length 30
 set -g status-left '/#S/ '
@@ -61,3 +59,10 @@ bind M \
     set -g mouse-select-pane off \;\
     set -g mouse-select-window off \;\
     display 'Mouse: OFF'
+
+# tmux X clipboard integration
+bind C-c run "tmux show-buffer | xsel -i -b"
+bind C-v run "tmux set-buffer -- \"$(xsel -o -b)\"; tmux paste-buffer"
+
+# Enable logging module, if available
+run-shell "~/.tmux/tmux-logging/logging.tmux || true"

dotfiles/tmux/tmux-solarized-256.conf

@@ -1,27 +1,22 @@
 #### COLOUR (Solarized 256)
 
 # default statusbar colors
-set-option -g status-bg colour235 #base02
-set-option -g status-fg colour136 #yellow
-set-option -g status-attr default
+set-option -g status-style fg=colour136,bg=colour235 #yellow and base02
 
 # default window title colors
-set-window-option -g window-status-fg colour244 #base0
-set-window-option -g window-status-bg default
-#set-window-option -g window-status-attr dim
+set-window-option -g window-status-style fg=colour244,bg=default #base0 and default
+#set-window-option -g window-status-style dim
 
 # active window title colors
-set-window-option -g window-status-current-fg colour166 #orange
-set-window-option -g window-status-current-bg default
-#set-window-option -g window-status-current-attr bright
+set-window-option -g window-status-current-style fg=colour166,bg=default #orange and default
+#set-window-option -g window-status-current-style bright
 
 # pane border
-set-option -g pane-border-fg colour235 #base02
-set-option -g pane-active-border-fg colour240 #base01
+set-option -g pane-border-style fg=colour235 #base02
+set-option -g pane-active-border-style fg=colour240 #base01
 
 # message text
-set-option -g message-bg colour235 #base02
-set-option -g message-fg colour166 #orange
+set-option -g message-style fg=colour166,bg=colour235 #orange and base02
 
 # pane number display
 set-option -g display-panes-active-colour colour33 #blue
@@ -29,3 +24,6 @@ set-option -g display-panes-colour colour166 #orange
 
 # clock
 set-window-option -g clock-mode-colour colour64 #green
+
+# bell
+set-window-option -g window-status-bell-style fg=colour235,bg=colour160 #base02, red

dotfiles/vimrc

@@ -1,25 +1,6 @@
 " Allow full use of vim options
 set nocompatible
 
-" Enable Vundle if installed
-if filereadable(glob("~/.vim/bundle/Vundle.vim/README.md"))
-  filetype off
-  set rtp+=~/.vim/bundle/Vundle.vim
-  call vundle#begin()
-  Plugin 'gmarik/Vundle.vim'
-  Plugin 'eistaa/vim-flake8'
-  Plugin 'tpope/vim-fugitive'
-  Plugin 'mileszs/ack.vim'
-  Plugin 'tpope/vim-unimpaired'
-  Plugin 'scrooloose/syntastic'
-  Plugin 'mattn/webapi-vim'
-  Plugin 'mattn/gist-vim'
-  Plugin 'fatih/vim-go'
-  Plugin 'altercation/vim-colors-solarized'
-  Plugin 'vimoutliner/vimoutliner'
-  call vundle#end()
-endif
-
 " Setup paths
 set backupdir=~/.cache/vim/backup//
 set directory=~/.cache/vim/swap//
@@ -47,7 +28,6 @@ imap <S-Tab> <Esc><<A
 " Line numbering, ruler
 set number
 set ruler
-set cursorline
 
 " File options
 set encoding=utf-8
@@ -58,12 +38,17 @@ if has('gui_running')
   set guifont=Inconsolata\ Medium\ 12
 else
   let g:solarized_termcolors=256
+  let g:solarized_termtrans=1
 endif
-silent! colorscheme solarized
-" Enable filetype support
-filetype plugin indent on
-" Allow file modelines
-set modeline
+if $TERM ==? 'rxvt-unicode-256color'
+  " I have .Xresources setup for solarized
+  let g:solarized_use16=1
+endif
+silent! colorscheme solarized8
+" Default ASM syntax for ft support
+let asmsyntax="nasm"
+" Too risky to allow file modelines
+set nomodeline
 " Automatically re-read changed files
 set autoread
 " fsync() after writing files
@@ -129,9 +114,18 @@ endfunction
 " Options for syntastic
 let g:syntastic_enable_signs = 1
 let g:syntastic_auto_loc_list = 2
+let g:syntastic_go_checkers = ['govet', 'errcheck', 'go']
+let g:syntastic_python_checkers=['flake8']
+
 " Have F5 run the tests and display errors
 nnoremap <silent> <F5> :SyntasticCheck<CR> :Errors<CR>
 
+" Load vim-ycm if installed on the system level
+if isdirectory("/usr/share/vim-youcompleteme")
+  let g:ycm_autoclose_preview_window_after_insertion=1
+  set runtimepath+=/usr/share/vim-youcompleteme
+endif
+
 " Include a .vimrc.local if it exists
 if filereadable(glob("~/.vimrc.local"))
   source ~/.vimrc.local
@@ -139,3 +133,27 @@ endif
 
 " Options for vimoutliner
 autocmd Filetype votl setlocal sts=4
+
+" Highlight whitespace at end of file
+highlight ExtraWhitespace ctermbg=red guibg=red
+autocmd Syntax * syn match ExtraWhitespace /\s\+$\| \+\ze\t/ containedin=ALL
+
+" Color column at end of lines
+set colorcolumn=+1
+highlight ColorColumn ctermbg=black guibg=lightgrey
+
+" Remove smart quotes
+command Unsmartquote %s/“\|”/"/g
+
+" Markdown options
+autocmd Filetype markdown set expandtab shiftwidth=4
+
+" Python options
+autocmd Filetype python set expandtab shiftwidth=4
+
+" Makefile options
+autocmd BufRead,BufNewFile Makefile* set noexpandtab
+
+" Enable filetype support
+" Needs to be at end of vimrc
+filetype plugin indent on

dotfiles/weechat/alias.conf

@@ -0,0 +1,41 @@
+#
+# weechat -- alias.conf
+#
+
+[cmd]
+AAWAY = "allserv /away"
+AME = "allchan /me"
+AMSG = "allchan /msg *"
+ANICK = "allserv /nick"
+BEEP = "print -beep"
+BYE = "quit"
+C = "buffer clear"
+CHAT = "dcc chat"
+CL = "buffer clear"
+CLOSE = "buffer close"
+EXIT = "quit"
+IG = "ignore"
+J = "join"
+K = "kick"
+KB = "kickban"
+LEAVE = "part"
+M = "msg"
+MSGBUF = "command -buffer $1 * /input send $2-"
+MUB = "unban *"
+N = "names"
+Q = "query"
+REDRAW = "window refresh"
+SAY = "msg *"
+SIGNOFF = "quit"
+T = "topic"
+UB = "unban"
+UMODE = "mode $nick"
+V = "command core version"
+W = "who"
+WC = "window merge"
+WI = "whois"
+WII = "whois $1 $1"
+WW = "whowas"
+
+[completion]
+MSGBUF = "%(buffers_plugins_names)"

dotfiles/weechat/aspell.conf

@@ -0,0 +1,20 @@
+#
+# weechat -- aspell.conf
+#
+
+[color]
+misspelled = lightred
+suggestions = default
+
+[check]
+commands = "ame,amsg,away,command,cycle,kick,kickban,me,msg,notice,part,query,quit,topic"
+default_dict = ""
+during_search = off
+enabled = off
+real_time = off
+suggestions = -1
+word_min_length = 2
+
+[dict]
+
+[option]

dotfiles/weechat/charset.conf

@@ -0,0 +1,11 @@
+#
+# weechat -- charset.conf
+#
+
+[default]
+decode = "iso-8859-1"
+encode = ""
+
+[decode]
+
+[encode]

dotfiles/weechat/exec.conf

@@ -0,0 +1,11 @@
+#
+# weechat -- exec.conf
+#
+
+[command]
+default_options = ""
+purge_delay = 0
+
+[color]
+flag_finished = lightred
+flag_running = lightgreen

dotfiles/weechat/irc.conf

@@ -0,0 +1,377 @@
+#
+# weechat -- irc.conf
+#
+
+[look]
+buffer_open_before_autojoin = on
+buffer_open_before_join = off
+buffer_switch_autojoin = on
+buffer_switch_join = on
+color_nicks_in_names = off
+color_nicks_in_nicklist = off
+color_nicks_in_server_messages = on
+color_pv_nick_like_channel = on
+ctcp_time_format = "%a, %d %b %Y %T %z"
+display_away = local
+display_ctcp_blocked = on
+display_ctcp_reply = on
+display_ctcp_unknown = on
+display_host_join = on
+display_host_join_local = on
+display_host_quit = on
+display_join_message = "329,332,333,366"
+display_old_topic = on
+display_pv_away_once = on
+display_pv_back = on
+highlight_channel = "$nick"
+highlight_pv = "$nick"
+highlight_server = "$nick"
+highlight_tags_restrict = "irc_privmsg,irc_notice"
+item_channel_modes_hide_args = "k"
+item_display_server = buffer_plugin
+item_nick_modes = on
+item_nick_prefix = on
+join_auto_add_chantype = off
+msgbuffer_fallback = current
+new_channel_position = none
+new_pv_position = none
+nick_completion_smart = speakers
+nick_mode = prefix
+nick_mode_empty = off
+nicks_hide_password = "nickserv"
+notice_as_pv = auto
+notice_welcome_redirect = on
+notice_welcome_tags = ""
+notify_tags_ison = "notify_message"
+notify_tags_whois = "notify_message"
+part_closes_buffer = on
+pv_buffer = independent
+pv_tags = "notify_private"
+raw_messages = 256
+server_buffer = merge_with_core
+smart_filter = on
+smart_filter_delay = 5
+smart_filter_join = on
+smart_filter_join_unmask = 30
+smart_filter_mode = "+"
+smart_filter_nick = on
+smart_filter_quit = on
+temporary_servers = off
+topic_strip_colors = off
+
+[color]
+input_nick = lightcyan
+item_channel_modes = default
+item_lag_counting = default
+item_lag_finished = yellow
+item_nick_modes = default
+message_join = green
+message_quit = red
+mirc_remap = "1,-1:darkgray"
+nick_prefixes = "q:lightred;a:lightcyan;o:lightgreen;h:lightmagenta;v:yellow;*:lightblue"
+notice = green
+reason_quit = default
+topic_current = default
+topic_new = white
+topic_old = default
+
+[network]
+autoreconnect_delay_growing = 2
+autoreconnect_delay_max = 600
+ban_mask_default = "*!$ident@$host"
+channel_encode = off
+colors_receive = on
+colors_send = on
+lag_check = 60
+lag_max = 1800
+lag_min_show = 500
+lag_reconnect = 0
+lag_refresh_interval = 1
+notify_check_ison = 1
+notify_check_whois = 5
+sasl_fail_unavailable = on
+send_unknown_commands = off
+whois_double_nick = off
+
+[msgbuffer]
+
+[ctcp]
+
+[ignore]
+
+[server_default]
+addresses = ""
+anti_flood_prio_high = 2
+anti_flood_prio_low = 2
+autoconnect = off
+autojoin = ""
+autoreconnect = on
+autoreconnect_delay = 10
+autorejoin = off
+autorejoin_delay = 30
+away_check = 0
+away_check_max_nicks = 25
+capabilities = ""
+command = ""
+command_delay = 0
+connection_timeout = 60
+ipv6 = on
+local_hostname = ""
+msg_kick = ""
+msg_part = "WeeChat ${info:version}"
+msg_quit = "WeeChat ${info:version}"
+nicks = "Matir,Matir~,Matir[]"
+nicks_alternate = on
+notify = ""
+password = ""
+proxy = ""
+realname = ""
+sasl_fail = continue
+sasl_key = ""
+sasl_mechanism = plain
+sasl_password = ""
+sasl_timeout = 15
+sasl_username = ""
+ssl = off
+ssl_cert = ""
+ssl_dhkey_size = 2048
+ssl_fingerprint = ""
+ssl_priorities = "NORMAL"
+ssl_verify = on
+username = "matir"
+
+[server]
+freenode.addresses = "chat.freenode.net/7000"
+freenode.proxy
+freenode.ipv6
+freenode.ssl = on
+freenode.ssl_cert = "%h/certs/freenode-matir.pem"
+freenode.ssl_priorities
+freenode.ssl_dhkey_size
+freenode.ssl_fingerprint
+freenode.ssl_verify = on
+freenode.password
+freenode.capabilities
+freenode.sasl_mechanism
+freenode.sasl_username
+freenode.sasl_password
+freenode.sasl_key
+freenode.sasl_timeout
+freenode.sasl_fail
+freenode.autoconnect = on
+freenode.autoreconnect
+freenode.autoreconnect_delay
+freenode.nicks = "Matir,Matir~"
+freenode.nicks_alternate
+freenode.username
+freenode.realname
+freenode.local_hostname
+freenode.command
+freenode.command_delay
+freenode.autojoin = "#kali-linux,#openvpn,#radare,#vulnhub,#offsec,#offtopicsec,##ctfcompetition,#dc404,#droidsec"
+freenode.autorejoin
+freenode.autorejoin_delay
+freenode.connection_timeout
+freenode.anti_flood_prio_high
+freenode.anti_flood_prio_low
+freenode.away_check
+freenode.away_check_max_nicks
+freenode.msg_kick
+freenode.msg_part
+freenode.msg_quit
+freenode.notify
+hak5.addresses = "irc.hak5.org/6697"
+hak5.proxy
+hak5.ipv6
+hak5.ssl = on
+hak5.ssl_cert = "%h/certs/freenode-matir.pem"
+hak5.ssl_priorities
+hak5.ssl_dhkey_size
+hak5.ssl_fingerprint
+hak5.ssl_verify = off
+hak5.password
+hak5.capabilities
+hak5.sasl_mechanism
+hak5.sasl_username
+hak5.sasl_password
+hak5.sasl_key
+hak5.sasl_timeout
+hak5.sasl_fail
+hak5.autoconnect = on
+hak5.autoreconnect
+hak5.autoreconnect_delay
+hak5.nicks
+hak5.nicks_alternate
+hak5.username
+hak5.realname
+hak5.local_hostname
+hak5.command
+hak5.command_delay
+hak5.autojoin = "#hak5,#pineapple,#ducky,#SDR,#lanturtle,#bashbunny"
+hak5.autorejoin
+hak5.autorejoin_delay
+hak5.connection_timeout
+hak5.anti_flood_prio_high
+hak5.anti_flood_prio_low
+hak5.away_check
+hak5.away_check_max_nicks
+hak5.msg_kick
+hak5.msg_part
+hak5.msg_quit
+hak5.notify
+rpisec.addresses = "irc.rpis.ec/6697"
+rpisec.proxy
+rpisec.ipv6
+rpisec.ssl = on
+rpisec.ssl_cert
+rpisec.ssl_priorities
+rpisec.ssl_dhkey_size
+rpisec.ssl_fingerprint
+rpisec.ssl_verify = on
+rpisec.password
+rpisec.capabilities
+rpisec.sasl_mechanism
+rpisec.sasl_username
+rpisec.sasl_password
+rpisec.sasl_key
+rpisec.sasl_timeout
+rpisec.sasl_fail
+rpisec.autoconnect = on
+rpisec.autoreconnect
+rpisec.autoreconnect_delay
+rpisec.nicks
+rpisec.nicks_alternate
+rpisec.username
+rpisec.realname
+rpisec.local_hostname
+rpisec.command
+rpisec.command_delay
+rpisec.autojoin = "#rpisec"
+rpisec.autorejoin
+rpisec.autorejoin_delay
+rpisec.connection_timeout
+rpisec.anti_flood_prio_high
+rpisec.anti_flood_prio_low
+rpisec.away_check
+rpisec.away_check_max_nicks
+rpisec.msg_kick
+rpisec.msg_part
+rpisec.msg_quit
+rpisec.notify
+overthewire.addresses = "ircs.overthewire.org/6697"
+overthewire.proxy
+overthewire.ipv6
+overthewire.ssl = on
+overthewire.ssl_cert = "%h/certs/freenode-matir.pem"
+overthewire.ssl_priorities
+overthewire.ssl_dhkey_size
+overthewire.ssl_fingerprint
+overthewire.ssl_verify = on
+overthewire.password
+overthewire.capabilities
+overthewire.sasl_mechanism
+overthewire.sasl_username
+overthewire.sasl_password
+overthewire.sasl_key
+overthewire.sasl_timeout
+overthewire.sasl_fail
+overthewire.autoconnect = on
+overthewire.autoreconnect
+overthewire.autoreconnect_delay
+overthewire.nicks
+overthewire.nicks_alternate
+overthewire.username
+overthewire.realname
+overthewire.local_hostname
+overthewire.command
+overthewire.command_delay
+overthewire.autojoin = "#wargames,#social,#amateria,#io"
+overthewire.autorejoin
+overthewire.autorejoin_delay
+overthewire.connection_timeout
+overthewire.anti_flood_prio_high
+overthewire.anti_flood_prio_low
+overthewire.away_check
+overthewire.away_check_max_nicks
+overthewire.msg_kick
+overthewire.msg_part
+overthewire.msg_quit
+overthewire.notify
+hackint.addresses = "irc.hackint.org/9999"
+hackint.proxy
+hackint.ipv6
+hackint.ssl = on
+hackint.ssl_cert
+hackint.ssl_priorities
+hackint.ssl_dhkey_size
+hackint.ssl_fingerprint
+hackint.ssl_verify = on
+hackint.password
+hackint.capabilities
+hackint.sasl_mechanism
+hackint.sasl_username
+hackint.sasl_password
+hackint.sasl_key
+hackint.sasl_timeout
+hackint.sasl_fail
+hackint.autoconnect = on
+hackint.autoreconnect
+hackint.autoreconnect_delay
+hackint.nicks
+hackint.nicks_alternate
+hackint.username
+hackint.realname
+hackint.local_hostname
+hackint.command
+hackint.command_delay
+hackint.autojoin
+hackint.autorejoin
+hackint.autorejoin_delay
+hackint.connection_timeout
+hackint.anti_flood_prio_high
+hackint.anti_flood_prio_low
+hackint.away_check
+hackint.away_check_max_nicks
+hackint.msg_kick
+hackint.msg_part
+hackint.msg_quit
+hackint.notify
+afternet.addresses = "irc.afternet.org/6697"
+afternet.proxy
+afternet.ipv6
+afternet.ssl = on
+afternet.ssl_cert
+afternet.ssl_priorities
+afternet.ssl_dhkey_size
+afternet.ssl_fingerprint
+afternet.ssl_verify = on
+afternet.password
+afternet.capabilities
+afternet.sasl_mechanism
+afternet.sasl_username
+afternet.sasl_password
+afternet.sasl_key
+afternet.sasl_timeout
+afternet.sasl_fail
+afternet.autoconnect = on
+afternet.autoreconnect
+afternet.autoreconnect_delay
+afternet.nicks
+afternet.nicks_alternate
+afternet.username
+afternet.realname
+afternet.local_hostname
+afternet.command
+afternet.command_delay
+afternet.autojoin = "#eevblog"
+afternet.autorejoin
+afternet.autorejoin_delay
+afternet.connection_timeout
+afternet.anti_flood_prio_high
+afternet.anti_flood_prio_low
+afternet.away_check
+afternet.away_check_max_nicks
+afternet.msg_kick
+afternet.msg_part
+afternet.msg_quit
+afternet.notify

dotfiles/weechat/letsencrypt.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+# Update the weechat SSL key.  Should be called from cron via sudo.
+
+eval WEEDIR="$(printf "~%q/.weechat/" "${SUDO_USER}")"
+LIVEKEY="${WEEDIR}/ssl/relay.pem"
+
+certbot renew -q
+cat /etc/letsencrypt/live/$(hostname -f)/{privkey,fullchain}.pem > \
+  ${LIVEKEY}
+chown ${SUDO_USER}:$(id -gn ${SUDO_USER}) ${LIVEKEY}
+for fifo in ${WEEDIR}/weechat_fifo* ; do
+  echo '*/relay sslcertkey' > ${fifo}
+done

dotfiles/weechat/logger.conf

@@ -0,0 +1,26 @@
+#
+# weechat -- logger.conf
+#
+
+[look]
+backlog = 20
+
+[color]
+backlog_end = default
+backlog_line = default
+
+[file]
+auto_log = on
+flush_delay = 120
+info_lines = off
+mask = "$plugin.$name.weechatlog"
+name_lower_case = on
+nick_prefix = ""
+nick_suffix = ""
+path = "%h/logs/"
+replacement_char = "_"
+time_format = "%Y-%m-%d %H:%M:%S"
+
+[level]
+
+[mask]

dotfiles/weechat/plugins.conf

@@ -0,0 +1,15 @@
+#
+# weechat -- plugins.conf
+#
+
+[var]
+fifo.fifo = "on"
+guile.check_license = "off"
+javascript.check_license = "off"
+lua.check_license = "off"
+perl.check_license = "off"
+python.check_license = "off"
+ruby.check_license = "off"
+tcl.check_license = "off"
+
+[desc]

dotfiles/weechat/relay.conf

@@ -0,0 +1,42 @@
+#
+# weechat -- relay.conf
+#
+
+[look]
+auto_open_buffer = on
+raw_messages = 256
+
+[color]
+client = cyan
+status_active = lightblue
+status_auth_failed = lightred
+status_connecting = yellow
+status_disconnected = lightred
+status_waiting_auth = brown
+text = default
+text_bg = default
+text_selected = white
+
+[network]
+allow_empty_password = off
+allowed_ips = ""
+bind_address = ""
+clients_purge_delay = 0
+compression_level = 6
+ipv6 = on
+max_clients = 5
+password = "${sec.data.relay_password}"
+ssl_cert_key = "%h/ssl/relay.pem"
+ssl_priorities = "NORMAL:-VERS-SSL3.0"
+websocket_allowed_origins = ""
+
+[irc]
+backlog_max_minutes = 1440
+backlog_max_number = 256
+backlog_since_last_disconnect = on
+backlog_since_last_message = off
+backlog_tags = "irc_privmsg"
+backlog_time_format = "[%H:%M] "
+
+[port]
+ssl.weechat = 9001

dotfiles/weechat/script.conf

@@ -0,0 +1,50 @@
+#
+# weechat -- script.conf
+#
+
+[look]
+columns = "%s %n %V %v %u | %d | %t"
+diff_color = on
+diff_command = "auto"
+display_source = on
+quiet_actions = on
+sort = "p,n"
+translate_description = on
+use_keys = on
+
+[color]
+status_autoloaded = cyan
+status_held = white
+status_installed = lightcyan
+status_obsolete = lightmagenta
+status_popular = yellow
+status_running = lightgreen
+status_unknown = lightred
+text = default
+text_bg = default
+text_bg_selected = red
+text_date = default
+text_date_selected = white
+text_delimiters = default
+text_description = default
+text_description_selected = white
+text_extension = default
+text_extension_selected = white
+text_name = cyan
+text_name_selected = lightcyan
+text_selected = white
+text_tags = brown
+text_tags_selected = yellow
+text_version = magenta
+text_version_loaded = default
+text_version_loaded_selected = white
+text_version_selected = lightmagenta
+
+[scripts]
+autoload = on
+cache_expire = 1440
+download_timeout = 30
+hold = ""
+path = "%h/script"
+url = "http://weechat.org/files/plugins.xml.gz"
+url_force_https = on

dotfiles/weechat/sec.conf

@@ -0,0 +1,13 @@
+#
+# weechat -- sec.conf
+#
+
+[crypt]
+cipher = aes256
+hash_algo = sha256
+passphrase_file = "~/.weechat-passphrase"
+salt = on
+
+[data]
+__passphrase__ = on
+relay_password = "D1FD30C08951B1A5BCBBB7EE6AAFB6AF9B86017B353182A1CA8826D5A98EB88E7E723591C544FC41A6913EA67E8764E50BDD8A5AD3D0A0"

dotfiles/weechat/trigger.conf

@@ -0,0 +1,52 @@
+#
+# weechat -- trigger.conf
+#
+
+[look]
+enabled = on
+monitor_strip_colors = off
+
+[color]
+flag_command = lightgreen
+flag_conditions = yellow
+flag_post_action = lightblue
+flag_regex = lightcyan
+flag_return_code = lightmagenta
+regex = white
+replace = cyan
+trigger = green
+trigger_disabled = red
+
+[trigger]
+beep.arguments = ""
+beep.command = "/print -beep"
+beep.conditions = "${tg_highlight} || ${tg_msg_pv}"
+beep.enabled = on
+beep.hook = print
+beep.post_action = none
+beep.regex = ""
+beep.return_code = ok
+cmd_pass.arguments = "5000|input_text_display;5000|history_add;5000|irc_command_auth"
+cmd_pass.command = ""
+cmd_pass.conditions = ""
+cmd_pass.enabled = on
+cmd_pass.hook = modifier
+cmd_pass.post_action = none
+cmd_pass.regex = "==^((/(msg|quote) +nickserv +(id|identify|register|ghost +[^ ]+|release +[^ ]+|regain +[^ ]+) +)|/oper +[^ ]+ +|/quote +pass +|/set +[^ ]*password[^ ]* +|/secure +(passphrase|decrypt|set +[^ ]+) +)(.*)==$1$.*+"
+cmd_pass.return_code = ok
+msg_auth.arguments = "5000|irc_message_auth"
+msg_auth.command = ""
+msg_auth.conditions = ""
+msg_auth.enabled = on
+msg_auth.hook = modifier
+msg_auth.post_action = none
+msg_auth.regex = "==^(.*(id|identify|register|ghost +[^ ]+|release +[^ ]+) +)(.*)==$1$.*+"
+msg_auth.return_code = ok
+server_pass.arguments = "5000|input_text_display;5000|history_add"
+server_pass.command = ""
+server_pass.conditions = ""
+server_pass.enabled = on
+server_pass.hook = modifier
+server_pass.post_action = none
+server_pass.regex = "==^(/(server|connect) .*-(sasl_)?password=)([^ ]+)(.*)==$1$.*4$5"
+server_pass.return_code = ok

dotfiles/weechat/weechat.conf

@@ -0,0 +1,595 @@
+#
+# weechat -- weechat.conf
+#
+
+[debug]
+
+[startup]
+command_after_plugins = ""
+command_before_plugins = ""
+display_logo = on
+display_version = on
+sys_rlimit = ""
+
+[look]
+align_end_of_lines = message
+bar_more_down = "++"
+bar_more_left = "<<"
+bar_more_right = ">>"
+bar_more_up = "--"
+bare_display_exit_on_input = on
+bare_display_time_format = "%H:%M"
+buffer_auto_renumber = on
+buffer_notify_default = all
+buffer_position = end
+buffer_search_case_sensitive = off
+buffer_search_force_default = off
+buffer_search_regex = off
+buffer_search_where = prefix_message
+buffer_time_format = "%H:%M:%S"
+color_basic_force_bold = off
+color_inactive_buffer = on
+color_inactive_message = on
+color_inactive_prefix = on
+color_inactive_prefix_buffer = on
+color_inactive_time = off
+color_inactive_window = on
+color_nick_offline = off
+color_pairs_auto_reset = 5
+color_real_white = off
+command_chars = ""
+command_incomplete = off
+confirm_quit = off
+confirm_upgrade = off
+day_change = on
+day_change_message_1date = "-- %a, %d %b %Y --"
+day_change_message_2dates = "-- %%a, %%d %%b %%Y (%a, %d %b %Y) --"
+eat_newline_glitch = off
+emphasized_attributes = ""
+highlight = ""
+highlight_regex = ""
+highlight_tags = ""
+hotlist_add_conditions = "${buffer.num_displayed} == 0 && ${priority} >= 1"
+hotlist_buffer_separator = ", "
+hotlist_count_max = 0
+hotlist_count_min_msg = 2
+hotlist_names_count = 10000
+hotlist_names_length = 0
+hotlist_names_level = 14
+hotlist_names_merged_buffers = off
+hotlist_prefix = "Act: "
+hotlist_remove = merged
+hotlist_short_names = on
+hotlist_sort = group_time_asc
+hotlist_suffix = ""
+hotlist_unique_numbers = on
+input_cursor_scroll = 20
+input_share = none
+input_share_overwrite = off
+input_undo_max = 32
+item_away_message = on
+item_buffer_filter = "*"
+item_buffer_zoom = "!"
+item_mouse_status = "M"
+item_time_format = "%H:%M"
+jump_current_to_previous_buffer = on
+jump_previous_buffer_when_closing = on
+jump_smart_back_to_buffer = on
+key_bind_safe = on
+key_grab_delay = 800
+mouse = off
+mouse_timer_delay = 100
+nick_color_force = ""
+nick_color_hash = djb2
+nick_color_stop_chars = "_|["
+nick_prefix = ""
+nick_suffix = ""
+paste_auto_add_newline = on
+paste_bracketed = on
+paste_bracketed_timer_delay = 10
+paste_max_lines = 1
+prefix_action = " *"
+prefix_align = right
+prefix_align_max = 15
+prefix_align_min = 0
+prefix_align_more = "+"
+prefix_align_more_after = on
+prefix_buffer_align = right
+prefix_buffer_align_max = 0
+prefix_buffer_align_more = "+"
+prefix_buffer_align_more_after = on
+prefix_error = "=!="
+prefix_join = "-->"
+prefix_network = "--"
+prefix_quit = "<--"
+prefix_same_nick = ""
+prefix_suffix = "|"
+quote_nick_prefix = "<"
+quote_nick_suffix = ">"
+quote_time_format = "%H:%M:%S"
+read_marker = line
+read_marker_always_show = off
+read_marker_string = "- "
+save_config_on_exit = on
+save_layout_on_exit = none
+scroll_amount = 3
+scroll_bottom_after_switch = off
+scroll_page_percent = 100
+search_text_not_found_alert = on
+separator_horizontal = "-"
+separator_vertical = ""
+tab_width = 1
+time_format = "%a, %d %b %Y %T"
+window_auto_zoom = off
+window_separator_horizontal = on
+window_separator_vertical = on
+window_title = "irc"
+word_chars_highlight = "!\u00A0,-,_,|,alnum"
+word_chars_input = "!\u00A0,-,_,|,alnum"
+
+[palette]
+
+[color]
+bar_more = lightmagenta
+chat = default
+chat_bg = default
+chat_buffer = white
+chat_channel = white
+chat_day_change = cyan
+chat_delimiters = green
+chat_highlight = yellow
+chat_highlight_bg = magenta
+chat_host = cyan
+chat_inactive_buffer = default
+chat_inactive_window = default
+chat_nick = lightcyan
+chat_nick_colors = "cyan,magenta,green,brown,lightblue,default,lightcyan,lightmagenta,lightgreen,blue"
+chat_nick_offline = default
+chat_nick_offline_highlight = default
+chat_nick_offline_highlight_bg = blue
+chat_nick_other = cyan
+chat_nick_prefix = green
+chat_nick_self = white
+chat_nick_suffix = green
+chat_prefix_action = white
+chat_prefix_buffer = brown
+chat_prefix_buffer_inactive_buffer = default
+chat_prefix_error = yellow
+chat_prefix_join = lightgreen
+chat_prefix_more = lightmagenta
+chat_prefix_network = magenta
+chat_prefix_quit = lightred
+chat_prefix_suffix = green
+chat_read_marker = magenta
+chat_read_marker_bg = default
+chat_server = brown
+chat_tags = red
+chat_text_found = yellow
+chat_text_found_bg = lightmagenta
+chat_time = default
+chat_time_delimiters = brown
+chat_value = cyan
+chat_value_null = blue
+emphasized = yellow
+emphasized_bg = magenta
+input_actions = lightgreen
+input_text_not_found = red
+item_away = yellow
+nicklist_away = cyan
+nicklist_group = green
+separator = blue
+status_count_highlight = magenta
+status_count_msg = brown
+status_count_other = default
+status_count_private = green
+status_data_highlight = lightmagenta
+status_data_msg = yellow
+status_data_other = default
+status_data_private = lightgreen
+status_filter = green
+status_more = yellow
+status_mouse = green
+status_name = white
+status_name_ssl = lightgreen
+status_nicklist_count = default
+status_number = yellow
+status_time = default
+
+[completion]
+base_word_until_cursor = on
+command_inline = on
+default_template = "%(nicks)|%(irc_channels)"
+nick_add_space = on
+nick_completer = ":"
+nick_first_only = off
+nick_ignore_chars = "[]`_-^"
+partial_completion_alert = on
+partial_completion_command = off
+partial_completion_command_arg = off
+partial_completion_count = on
+partial_completion_other = off
+
+[history]
+display_default = 5
+max_buffer_lines_minutes = 0
+max_buffer_lines_number = 4096
+max_commands = 100
+max_visited_buffers = 50
+
+[proxy]
+
+[network]
+connection_timeout = 60
+gnutls_ca_file = "~/.weechat/certs/ca-certificates.crt"
+gnutls_handshake_timeout = 30
+proxy_curl = ""
+
+[plugin]
+autoload = "*"
+debug = off
+extension = ".so,.dll"
+path = "%h/plugins"
+save_config_on_unload = on
+
+[bar]
+input.color_bg = default
+input.color_delim = cyan
+input.color_fg = default
+input.conditions = ""
+input.filling_left_right = vertical
+input.filling_top_bottom = horizontal
+input.hidden = off
+input.items = "[input_prompt]+(away),[input_search],[input_paste],input_text"
+input.position = bottom
+input.priority = 1000
+input.separator = off
+input.size = 1
+input.size_max = 0
+input.type = window
+nicklist.color_bg = default
+nicklist.color_delim = cyan
+nicklist.color_fg = default
+nicklist.conditions = "${nicklist}"
+nicklist.filling_left_right = vertical
+nicklist.filling_top_bottom = columns_vertical
+nicklist.hidden = on
+nicklist.items = "buffer_nicklist"
+nicklist.position = right
+nicklist.priority = 200
+nicklist.separator = on
+nicklist.size = 0
+nicklist.size_max = 0
+nicklist.type = window
+status.color_bg = 0
+status.color_delim = cyan
+status.color_fg = default
+status.conditions = ""
+status.filling_left_right = vertical
+status.filling_top_bottom = horizontal
+status.hidden = off
+status.items = "[time],[buffer_plugin],buffer_number+:+buffer_name+(buffer_modes)+{buffer_nicklist_count}+buffer_zoom+buffer_filter,[lag],[hotlist],completion,scroll"
+status.position = bottom
+status.priority = 500
+status.separator = off
+status.size = 2
+status.size_max = 0
+status.type = window
+title.color_bg = 0
+title.color_delim = cyan
+title.color_fg = default
+title.conditions = ""
+title.filling_left_right = vertical
+title.filling_top_bottom = horizontal
+title.hidden = off
+title.items = "buffer_title"
+title.position = top
+title.priority = 500
+title.separator = off
+title.size = 1
+title.size_max = 0
+title.type = window
+
+[layout]
+
+[notify]
+
+[filter]
+irc_smart = on;*;irc_smart_filter;*
+
+[key]
+ctrl-? = "/input delete_previous_char"
+ctrl-A = "/input move_beginning_of_line"
+ctrl-B = "/input move_previous_char"
+ctrl-C_ = "/input insert \x1F"
+ctrl-Cb = "/input insert \x02"
+ctrl-Cc = "/input insert \x03"
+ctrl-Ci = "/input insert \x1D"
+ctrl-Co = "/input insert \x0F"
+ctrl-Cv = "/input insert \x16"
+ctrl-D = "/input delete_next_char"
+ctrl-E = "/input move_end_of_line"
+ctrl-F = "/input move_next_char"
+ctrl-H = "/input delete_previous_char"
+ctrl-I = "/input complete_next"
+ctrl-J = "/input return"
+ctrl-K = "/input delete_end_of_line"
+ctrl-L = "/window refresh"
+ctrl-M = "/input return"
+ctrl-N = "/buffer +1"
+ctrl-P = "/buffer -1"
+ctrl-R = "/input search_text"
+ctrl-Sctrl-U = "/input set_unread"
+ctrl-T = "/input transpose_chars"
+ctrl-U = "/input delete_beginning_of_line"
+ctrl-W = "/input delete_previous_word"
+ctrl-X = "/input switch_active_buffer"
+ctrl-Y = "/input clipboard_paste"
+meta-meta2-1~ = "/window scroll_top"
+meta-meta2-23~ = "/bar scroll nicklist * b"
+meta-meta2-24~ = "/bar scroll nicklist * e"
+meta-meta2-4~ = "/window scroll_bottom"
+meta-meta2-5~ = "/window scroll_up"
+meta-meta2-6~ = "/window scroll_down"
+meta-meta2-7~ = "/window scroll_top"
+meta-meta2-8~ = "/window scroll_bottom"
+meta-meta2-A = "/buffer -1"
+meta-meta2-B = "/buffer +1"
+meta-meta2-C = "/buffer +1"
+meta-meta2-D = "/buffer -1"
+meta-- = "/filter toggle @"
+meta-/ = "/input jump_last_buffer_displayed"
+meta-0 = "/buffer *10"
+meta-1 = "/buffer *1"
+meta-2 = "/buffer *2"
+meta-3 = "/buffer *3"
+meta-4 = "/buffer *4"
+meta-5 = "/buffer *5"
+meta-6 = "/buffer *6"
+meta-7 = "/buffer *7"
+meta-8 = "/buffer *8"
+meta-9 = "/buffer *9"
+meta-< = "/input jump_previously_visited_buffer"
+meta-= = "/filter toggle"
+meta-> = "/input jump_next_visited_buffer"
+meta-OA = "/input history_global_previous"
+meta-OB = "/input history_global_next"
+meta-OC = "/input move_next_word"
+meta-OD = "/input move_previous_word"
+meta-OF = "/input move_end_of_line"
+meta-OH = "/input move_beginning_of_line"
+meta-Oa = "/input history_global_previous"
+meta-Ob = "/input history_global_next"
+meta-Oc = "/input move_next_word"
+meta-Od = "/input move_previous_word"
+meta2-15~ = "/buffer -1"
+meta2-17~ = "/buffer +1"
+meta2-18~ = "/window -1"
+meta2-19~ = "/window +1"
+meta2-1;3A = "/buffer -1"
+meta2-1;3B = "/buffer +1"
+meta2-1;3C = "/buffer +1"
+meta2-1;3D = "/buffer -1"
+meta2-1;3F = "/window scroll_bottom"
+meta2-1;3H = "/window scroll_top"
+meta2-1;5A = "/input history_global_previous"
+meta2-1;5B = "/input history_global_next"
+meta2-1;5C = "/input move_next_word"
+meta2-1;5D = "/input move_previous_word"
+meta2-1~ = "/input move_beginning_of_line"
+meta2-200~ = "/input paste_start"
+meta2-201~ = "/input paste_stop"
+meta2-20~ = "/bar scroll title * -30%"
+meta2-21~ = "/bar scroll title * +30%"
+meta2-23;3~ = "/bar scroll nicklist * b"
+meta2-23~ = "/bar scroll nicklist * -100%"
+meta2-24;3~ = "/bar scroll nicklist * e"
+meta2-24~ = "/bar scroll nicklist * +100%"
+meta2-3~ = "/input delete_next_char"
+meta2-4~ = "/input move_end_of_line"
+meta2-5;3~ = "/window scroll_up"
+meta2-5~ = "/window page_up"
+meta2-6;3~ = "/window scroll_down"
+meta2-6~ = "/window page_down"
+meta2-7~ = "/input move_beginning_of_line"
+meta2-8~ = "/input move_end_of_line"
+meta2-A = "/input history_previous"
+meta2-B = "/input history_next"
+meta2-C = "/input move_next_char"
+meta2-D = "/input move_previous_char"
+meta2-F = "/input move_end_of_line"
+meta2-G = "/window page_down"
+meta2-H = "/input move_beginning_of_line"
+meta2-I = "/window page_up"
+meta2-Z = "/input complete_previous"
+meta2-[E = "/buffer -1"
+meta-_ = "/input redo"
+meta-a = "/input jump_smart"
+meta-b = "/input move_previous_word"
+meta-d = "/input delete_next_word"
+meta-f = "/input move_next_word"
+meta-h = "/input hotlist_clear"
+meta-jmeta-f = "/buffer -"
+meta-jmeta-l = "/buffer +"
+meta-jmeta-r = "/server raw"
+meta-jmeta-s = "/server jump"
+meta-j01 = "/buffer 1"
+meta-j02 = "/buffer 2"
+meta-j03 = "/buffer 3"
+meta-j04 = "/buffer 4"
+meta-j05 = "/buffer 5"
+meta-j06 = "/buffer 6"
+meta-j07 = "/buffer 7"
+meta-j08 = "/buffer 8"
+meta-j09 = "/buffer 9"
+meta-j10 = "/buffer 10"
+meta-j11 = "/buffer 11"
+meta-j12 = "/buffer 12"
+meta-j13 = "/buffer 13"
+meta-j14 = "/buffer 14"
+meta-j15 = "/buffer 15"
+meta-j16 = "/buffer 16"
+meta-j17 = "/buffer 17"
+meta-j18 = "/buffer 18"
+meta-j19 = "/buffer 19"
+meta-j20 = "/buffer 20"
+meta-j21 = "/buffer 21"
+meta-j22 = "/buffer 22"
+meta-j23 = "/buffer 23"
+meta-j24 = "/buffer 24"
+meta-j25 = "/buffer 25"
+meta-j26 = "/buffer 26"
+meta-j27 = "/buffer 27"
+meta-j28 = "/buffer 28"
+meta-j29 = "/buffer 29"
+meta-j30 = "/buffer 30"
+meta-j31 = "/buffer 31"
+meta-j32 = "/buffer 32"
+meta-j33 = "/buffer 33"
+meta-j34 = "/buffer 34"
+meta-j35 = "/buffer 35"
+meta-j36 = "/buffer 36"
+meta-j37 = "/buffer 37"
+meta-j38 = "/buffer 38"
+meta-j39 = "/buffer 39"
+meta-j40 = "/buffer 40"
+meta-j41 = "/buffer 41"
+meta-j42 = "/buffer 42"
+meta-j43 = "/buffer 43"
+meta-j44 = "/buffer 44"
+meta-j45 = "/buffer 45"
+meta-j46 = "/buffer 46"
+meta-j47 = "/buffer 47"
+meta-j48 = "/buffer 48"
+meta-j49 = "/buffer 49"
+meta-j50 = "/buffer 50"
+meta-j51 = "/buffer 51"
+meta-j52 = "/buffer 52"
+meta-j53 = "/buffer 53"
+meta-j54 = "/buffer 54"
+meta-j55 = "/buffer 55"
+meta-j56 = "/buffer 56"
+meta-j57 = "/buffer 57"
+meta-j58 = "/buffer 58"
+meta-j59 = "/buffer 59"
+meta-j60 = "/buffer 60"
+meta-j61 = "/buffer 61"
+meta-j62 = "/buffer 62"
+meta-j63 = "/buffer 63"
+meta-j64 = "/buffer 64"
+meta-j65 = "/buffer 65"
+meta-j66 = "/buffer 66"
+meta-j67 = "/buffer 67"
+meta-j68 = "/buffer 68"
+meta-j69 = "/buffer 69"
+meta-j70 = "/buffer 70"
+meta-j71 = "/buffer 71"
+meta-j72 = "/buffer 72"
+meta-j73 = "/buffer 73"
+meta-j74 = "/buffer 74"
+meta-j75 = "/buffer 75"
+meta-j76 = "/buffer 76"
+meta-j77 = "/buffer 77"
+meta-j78 = "/buffer 78"
+meta-j79 = "/buffer 79"
+meta-j80 = "/buffer 80"
+meta-j81 = "/buffer 81"
+meta-j82 = "/buffer 82"
+meta-j83 = "/buffer 83"
+meta-j84 = "/buffer 84"
+meta-j85 = "/buffer 85"
+meta-j86 = "/buffer 86"
+meta-j87 = "/buffer 87"
+meta-j88 = "/buffer 88"
+meta-j89 = "/buffer 89"
+meta-j90 = "/buffer 90"
+meta-j91 = "/buffer 91"
+meta-j92 = "/buffer 92"
+meta-j93 = "/buffer 93"
+meta-j94 = "/buffer 94"
+meta-j95 = "/buffer 95"
+meta-j96 = "/buffer 96"
+meta-j97 = "/buffer 97"
+meta-j98 = "/buffer 98"
+meta-j99 = "/buffer 99"
+meta-k = "/input grab_key_command"
+meta-l = "/window bare"
+meta-m = "/mute mouse toggle"
+meta-n = "/window scroll_next_highlight"
+meta-p = "/window scroll_previous_highlight"
+meta-r = "/input delete_line"
+meta-s = "/mute aspell toggle"
+meta-u = "/window scroll_unread"
+meta-wmeta-meta2-A = "/window up"
+meta-wmeta-meta2-B = "/window down"
+meta-wmeta-meta2-C = "/window right"
+meta-wmeta-meta2-D = "/window left"
+meta-wmeta2-1;3A = "/window up"
+meta-wmeta2-1;3B = "/window down"
+meta-wmeta2-1;3C = "/window right"
+meta-wmeta2-1;3D = "/window left"
+meta-wmeta-b = "/window balance"
+meta-wmeta-s = "/window swap"
+meta-x = "/input zoom_merged_buffer"
+meta-z = "/window zoom"
+ctrl-_ = "/input undo"
+
+[key_search]
+ctrl-I = "/input search_switch_where"
+ctrl-J = "/input search_stop"
+ctrl-M = "/input search_stop"
+ctrl-R = "/input search_switch_regex"
+meta2-A = "/input search_previous"
+meta2-B = "/input search_next"
+meta-c = "/input search_switch_case"
+
+[key_cursor]
+ctrl-J = "/cursor stop"
+ctrl-M = "/cursor stop"
+meta-meta2-A = "/cursor move area_up"
+meta-meta2-B = "/cursor move area_down"
+meta-meta2-C = "/cursor move area_right"
+meta-meta2-D = "/cursor move area_left"
+meta2-1;3A = "/cursor move area_up"
+meta2-1;3B = "/cursor move area_down"
+meta2-1;3C = "/cursor move area_right"
+meta2-1;3D = "/cursor move area_left"
+meta2-A = "/cursor move up"
+meta2-B = "/cursor move down"
+meta2-C = "/cursor move right"
+meta2-D = "/cursor move left"
+@item(buffer_nicklist):K = "/window ${_window_number};/kickban ${nick}"
+@item(buffer_nicklist):b = "/window ${_window_number};/ban ${nick}"
+@item(buffer_nicklist):k = "/window ${_window_number};/kick ${nick}"
+@item(buffer_nicklist):q = "/window ${_window_number};/query ${nick};/cursor stop"
+@item(buffer_nicklist):w = "/window ${_window_number};/whois ${nick}"
+@chat:Q = "hsignal:chat_quote_time_prefix_message;/cursor stop"
+@chat:m = "hsignal:chat_quote_message;/cursor stop"
+@chat:q = "hsignal:chat_quote_prefix_message;/cursor stop"
+
+[key_mouse]
+@bar(input):button2 = "/input grab_mouse_area"
+@bar(nicklist):button1-gesture-down = "/bar scroll nicklist ${_window_number} +100%"
+@bar(nicklist):button1-gesture-down-long = "/bar scroll nicklist ${_window_number} e"
+@bar(nicklist):button1-gesture-up = "/bar scroll nicklist ${_window_number} -100%"
+@bar(nicklist):button1-gesture-up-long = "/bar scroll nicklist ${_window_number} b"
+@chat(script.scripts):button1 = "/window ${_window_number};/script go ${_chat_line_y}"
+@chat(script.scripts):button2 = "/window ${_window_number};/script go ${_chat_line_y};/script installremove -q ${script_name_with_extension}"
+@chat(script.scripts):wheeldown = "/script down 5"
+@chat(script.scripts):wheelup = "/script up 5"
+@item(buffer_nicklist):button1 = "/window ${_window_number};/query ${nick}"
+@item(buffer_nicklist):button1-gesture-left = "/window ${_window_number};/kick ${nick}"
+@item(buffer_nicklist):button1-gesture-left-long = "/window ${_window_number};/kickban ${nick}"
+@item(buffer_nicklist):button2 = "/window ${_window_number};/whois ${nick}"
+@item(buffer_nicklist):button2-gesture-left = "/window ${_window_number};/ban ${nick}"
+@bar:wheeldown = "/bar scroll ${_bar_name} ${_window_number} +20%"
+@bar:wheelup = "/bar scroll ${_bar_name} ${_window_number} -20%"
+@chat:button1 = "/window ${_window_number}"
+@chat:button1-gesture-left = "/window ${_window_number};/buffer -1"
+@chat:button1-gesture-left-long = "/window ${_window_number};/buffer 1"
+@chat:button1-gesture-right = "/window ${_window_number};/buffer +1"
+@chat:button1-gesture-right-long = "/window ${_window_number};/input jump_last_buffer"
+@chat:ctrl-wheeldown = "/window scroll_horiz -window ${_window_number} +10%"
+@chat:ctrl-wheelup = "/window scroll_horiz -window ${_window_number} -10%"
+@chat:wheeldown = "/window scroll_down -window ${_window_number}"
+@chat:wheelup = "/window scroll_up -window ${_window_number}"
+@*:button3 = "/cursor go ${_x},${_y}"

dotfiles/weechat/xfer.conf

@@ -0,0 +1,39 @@
+#
+# weechat -- xfer.conf
+#
+
+[look]
+auto_open_buffer = on
+progress_bar_size = 20
+pv_tags = "notify_private"
+
+[color]
+status_aborted = lightred
+status_active = lightblue
+status_connecting = yellow
+status_done = lightgreen
+status_failed = lightred
+status_waiting = lightcyan
+text = default
+text_bg = default
+text_selected = white
+
+[network]
+blocksize = 65536
+fast_send = on
+own_ip = ""
+port_range = ""
+speed_limit = 0
+timeout = 300
+
+[file]
+auto_accept_chats = off
+auto_accept_files = off
+auto_accept_nicks = ""
+auto_check_crc32 = off
+auto_rename = on
+auto_resume = on
+convert_spaces = on
+download_path = "%h/xfer"
+upload_path = "~"
+use_nick_in_filename = on

dotfiles/xsessionrc

@@ -1,2 +1,4 @@
-setxkbmap -option ctrl:nocaps
+setxkbmap -option ctrl:nocaps -option compose:ralt
+test -x /usr/bin/xsettingsd && /usr/bin/xsettingsd &
+test -f "$HOME/.env" && "$HOME/.env"
 test -f "$HOME/.profile" && . "$HOME/.profile"

dotfiles/xsettingsd

@@ -0,0 +1,45 @@
+Gdk/UnscaledDPI 98304
+Gdk/WindowScalingFactor 1
+Gtk/AutoMnemonics 1
+Gtk/ButtonImages 0
+Gtk/CanChangeAccels 0
+Gtk/ColorPalette "black:white:gray50:red:purple:blue:light blue:green:yellow:orange:lavender:brown:goldenrod4:dodger blue:pink:light green:gray10:gray30:gray75:gray90"
+Gtk/ColorScheme ""
+Gtk/CursorBlinkTimeout 10
+Gtk/CursorThemeName "Adwaita"
+Gtk/CursorThemeSize 24
+Gtk/DecorationLayout "menu:minimize,maximize,close"
+Gtk/EnableAnimations 1
+Gtk/FontName "Sans 9"
+Gtk/IMModule ""
+Gtk/IMPreeditStyle "callback"
+Gtk/IMStatusStyle "callback"
+Gtk/KeyThemeName "Default"
+Gtk/MenuBarAccel "F10"
+Gtk/MenuImages 0
+Gtk/Modules ""
+Gtk/RecentFilesEnabled 0
+Gtk/RecentFilesMaxAge -1
+Gtk/ShellShowsAppMenu 0
+Gtk/ShellShowsMenubar 0
+Gtk/ShowInputMethodMenu 1
+Gtk/ShowUnicodeMenu 1
+Gtk/TimeoutInitial 200
+Gtk/TimeoutRepeat 20
+Gtk/ToolbarIconSize "large"
+Gtk/ToolbarStyle "both-horiz"
+Net/CursorBlink 1
+Net/CursorBlinkTime 1200
+Net/DndDragThreshold 8
+Net/DoubleClickTime 400
+Net/EnableEventSounds 0
+Net/EnableInputFeedbackSounds 0
+Net/FallbackIconTheme "gnome"
+Net/IconThemeName "Humanity"
+Net/SoundThemeName "freedesktop"
+Net/ThemeName "Ambiance"
+Xft/Antialias 1
+Xft/DPI 98304
+Xft/Hinting 1
+Xft/HintStyle "hintslight"
+Xft/RGBA "rgb"

dotfiles/zlogin

@@ -0,0 +1,8 @@
+# Execute code that does not affect the current session in the background.
+{
+  # Compile the completion dump to increase startup speed.
+  zcompdump="${ZDOTDIR:-$HOME}/.zcompdump"
+  if [[ -s "$zcompdump" && (! -s "${zcompdump}.zwc" || "$zcompdump" -nt "${zcompdump}.zwc") ]]; then
+    zcompile "$zcompdump"
+  fi
+} &!

dotfiles/zsh_custom/themes/matir.zsh-theme

@@ -1,3 +0,0 @@
-PROMPT='%{$fg[black]%}[%{$fg[yellow]%}%h%{$fg[black]%}] %{%(!.$fg[red].$fg[green])%}%8>..>%n%>>%{$fg[white]%}@%{$fg[blue]%}%12>..>%m%>>%{$fg[white]%}:%{$fg[green]%}%32<...<%~%<<%{$fg[blue]%}$(git_prompt_info)%{$fg[white]%}%#%{$reset_color%} '
-ZSH_THEME_GIT_PROMPT_PREFIX=" ("
-ZSH_THEME_GIT_PROMPT_SUFFIX=")"

dotfiles/zshrc

@@ -1,16 +1,57 @@
 # For interactive shells
-HISTFILE=~/.histfile
-HISTSIZE=1000
-SAVEHIST=1000
-setopt appendhistory autocd autopushd extendedglob nohup nomatch histignorespace histlexwords histverify cbases
-unsetopt beep histbeep listbeep flowcontrol
-bindkey -e
+HISTFILE=~/.zhistory
+HISTSIZE=10000
+SAVEHIST=10000
+setopt \
+  ALWAYS_TO_END \
+  APPEND_HISTORY \
+  AUTO_CD \
+  AUTO_LIST \
+  AUTO_MENU \
+  AUTO_PARAM_SLASH \
+  AUTO_PUSHD \
+  BANG_HIST \
+  C_BASES \
+  COMPLETE_IN_WORD \
+  EXTENDED_GLOB \
+  EXTENDED_HISTORY \
+  HIST_EXPIRE_DUPS_FIRST \
+  HIST_FIND_NO_DUPS \
+  HIST_IGNORE_DUPS \
+  HIST_IGNORE_SPACE \
+  HIST_LEX_WORDS \
+  HIST_SAVE_NO_DUPS \
+  HIST_VERIFY \
+  INTERACTIVE_COMMENTS \
+  LONG_LIST_JOBS \
+  MULTIOS \
+  NO_CLOBBER \
+  NO_HUP \
+  NOMATCH \
+  NOTIFY \
+  PUSHD_IGNORE_DUPS \
+  PUSHD_SILENT \
+  PUSHD_TO_HOME \
+  RC_QUOTES \
+  SHARE_HISTORY
+unsetopt \
+  BEEP \
+  CDABLE_VARS \
+  HIST_BEEP \
+  LIST_BEEP \
+  FLOW_CONTROL \
+  MAIL_WARNING \
+  HUP \
+  BG_NICE \
+  CHECK_JOBS
+# vi keybindings
+bindkey -v
 
-# Completion
-zstyle :compinstall filename '/home/david/.zshrc'
-autoload -Uz compinit && compinit
+# Allow core files
+ulimit -c unlimited
 
 DIRSTACKSIZE=16
+# Set terminal title
 case $TERM in
   xterm*)
     precmd () {print -Pn "\e]0;%n@%m: %~\a"}
@@ -18,38 +59,81 @@ case $TERM in
 esac
 
 autoload -U colors && colors
-PS1="%{%(!.$fg[red].$fg[green])%}%n%{$fg[white]%}@%{$fg[cyan]%}%m%{$fg[white]%}:%{$fg[green]%}%32<...<%~%<<%{$fg[white]%}%#%{$reset_color%} "
+PS1="%{$fg[black]%}[%{$fg[yellow]%}%h%{$fg[black]%}] %{%(!.$fg[red].$fg[green])%}%8>..>%n%>>%{$fg[white]%}@%{$fg[blue]%}%12>..>%m%>>%{$fg[white]%}:%{$fg[green]%}%32<...<%~%<<%{$fg[white]%}%#%{$reset_color%} "
+
+zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
+zstyle ':completion::complete:*' use-cache on
+zstyle ':completion::complete:*' cache-path "${ZDOTDIR:-$HOME}/.zcompcache"
 
 # .profile is universal
 . ~/.profile
 # Deduplicate the path
 typeset -U path
 
-# LS Colors
-alias ls='ls --color'
-zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
-
-# Load oh-my-zsh
-if [ -d $HOME/.oh-my-zsh ] ; then
-  ZSH=$HOME/.oh-my-zsh
-  ZSH_THEME="matir"
-  ZSH_CUSTOM="$HOME/.zsh_custom"
-  plugins=(git encode64 gpg-agent pep8 pip python tmux urltools extract sudo virsh virtualenv command-not-found)
-  source $ZSH/oh-my-zsh.sh
-  unset ZSH_THEME
-  unset ZSH_CUSTOM
-fi
-
-# Keybindings
+# Additional Keybindings
 bindkey '^[[A' history-search-backward
 bindkey '^[[B' history-search-forward
+# ctrl-arrow keys
 bindkey '^[[1;5C' forward-word
 bindkey '^[[1;5D' backward-word
+bindkey '^P' up-history
+bindkey '^N' down-history
+bindkey '^?' backward-delete-char
+bindkey '^h' backward-delete-char
+# ok, a few emacs convenience bindings
+bindkey '^w' backward-kill-word
+bindkey '^r' history-incremental-search-backward
 
 # Source extras and aliases if interactive
 if [[ $- == *i* ]] ; then
   if [[ -e $HOME/.aliases ]] ; then source $HOME/.aliases ; fi
-  for file in $HOME/.zshrc.d/* ; do source "$file" ; done
+  # zsh-only-ism to avoid error if glob doesn't expand
+  for file in $HOME/.zshrc.d/[a-zA-Z0-9]*.zsh(N) ; do
+    source "$file"
+  done
+  # extra completions, prompt
+  fpath=(~/.zshrc.completions ~/.zshrc.d/matir_prompt $fpath)
+  # Completion
+  zstyle ':compinstall' filename "${HOME}/.zshrc"
+  zstyle ':completion:*' users root ${USER}
+  # Modules after fpath
+  autoload -Uz compinit && compinit -i
+  autoload -Uz promptinit && promptinit
+  # Prompt
+  prompt matir
+  # Virtualenvwrapper
+  if test -f /usr/share/virtualenvwrapper/virtualenvwrapper_lazy.sh ; then
+    source /usr/share/virtualenvwrapper/virtualenvwrapper_lazy.sh
+  fi
+  # Enable grc if we have it
+  if ls --version 2>&1 >/dev/null ; then
+    alias ls='ls --color -C'
+  fi
+  [[ -s "/etc/grc.zsh" ]] && source /etc/grc.zsh
+  # Syntax highlighting and substring search
+  if test -f /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ; then
+    source /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
+  fi
+  if test -f ${HOME}/.zshrc.d/_zsh-history-substring-search.zsh ; then
+    source ${HOME}/.zshrc.d/_zsh-history-substring-search.zsh
+    bindkey '^[[A' history-substring-search-up
+    bindkey '^[[B' history-substring-search-down
+    bindkey -M vicmd 'k' history-substring-search-up
+    bindkey -M vicmd 'j' history-substring-search-down
+  fi
+fi  # End interactive-only block
+
+# In case ack is named ack-grep
+if [ -x /usr/bin/ack-grep ] ; then
+  alias ack='/usr/bin/ack-grep'
+fi
+
+# Setup PATH for tools
+PATH=${PATH}:${HOME}/bin/tools
+
+# Most is nice, if we have it
+if command -v most >/dev/null 2>&1; then
+  export PAGER="most"
 fi
 
 # Load any local settings

dotfiles/zshrc.completions/_jekyll

@@ -0,0 +1,52 @@
+#compdef jekyll
+
+_jekyll() {
+  local curcontext="${curcontext}" state line file
+  typeset -A opt_args
+
+  local -a _subcommands
+  _subcommands=('docs:list documentation'
+      'import:import posts'
+      'serve:run server'
+      'help:get help'
+      'doctor:deprecation warnings'
+      'build:compile site'
+      'new:create new site'
+      'clean:clean output'
+      'draft:create new draft'
+      'post:create new post'
+      'publish:publish draft'
+      'edit:edit post')
+
+  _arguments -C \
+    "(source)"{-s,--source}"[source]:source dir:_files -/" \
+    "(dest)"{-d,--destination}"[dest]:dest dir:_files -/" \
+    "--safe[safe mode]" \
+    "(plugins)"{-p,--plugins}"[plugins]:plugins dir:_files -/" \
+    "--layouts[layouts]:layouts dir:_files -/" \
+    "--profile[generate liquid profile]" \
+    "(help)"{-h,--help}"[help]" \
+    "(version)"{-v,--version}"[version]" \
+    "(trace)"{-t,--trace}"[trace]" \
+    "1:command:->command" \
+    "*: :->args"
+
+  case $state in
+    command)
+      _describe -t commands "jekyll subcommand" _subcommands
+      ;;
+    args)
+      case "$line[1]" in
+        edit)
+          # TODO: Fix to get --source argument
+          local -a postpaths
+          postpaths=("${JEKYLL_DIR}/_posts" "${JEKYLL_DIR}/_drafts")
+          _files -W postpaths
+          ;;
+        publish)
+          # TODO: Fix to get --source argument
+          _files -W ${JEKYLL_DIR}/_drafts
+      esac
+      ;;
+  esac
+}

dotfiles/zshrc.completions/_msfconsole

@@ -0,0 +1,58 @@
+#compdef msfconsole
+# ------------------------------------------------------------------------------
+# Copyright (c) 2014 Spencer McIntyre
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in the
+#     documentation and/or other materials provided with the distribution.
+#   * Neither the name of the project nor the
+#     names of its contributors may be used to endorse or promote products
+#     derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+# Description
+# -----------
+#
+#  Completion script for the Metasploit Framework's msfconsole command
+#  (http://www.metasploit.com/).
+#
+# ------------------------------------------------------------------------------
+# Authors
+# -------
+#
+#  * Spencer McIntyre
+#
+# ------------------------------------------------------------------------------
+
+_arguments \
+  {-a,--ask}"[Ask before exiting Metasploit or accept 'exit -y']" \
+  "-c[Load the specified configuration file]:configuration file:_files" \
+  {-d,--defanged}"[Execute the console as defanged]" \
+  {-E,--environment}"[Specify the database environment to load from the configuration]:environment:(production development)" \
+  {-h,--help}"[Show help text]" \
+  {-L,--real-readline}"[Use the system Readline library instead of RbReadline]" \
+  {-M,--migration-path}"[Specify a directory containing additional DB migrations]:directory:_files -/" \
+  {-m,--module-path}"[Specifies an additional module search path]:search path:_files -/" \
+  {-n,--no-database}"[Disable database support]" \
+  {-o,--output}"[Output to the specified file]:output file" \
+  {-p,--plugin}"[Load a plugin on startup]:plugin file:_files" \
+  {-q,--quiet}"[Do not print the banner on start up]" \
+  {-r,--resource}"[Execute the specified resource file]:resource file:_files" \
+  {-v,--version}"[Show version]" \
+  {-x,--execute-command}"[Execute the specified string as console commands]:commands" \
+  {-y,--yaml}"[Specify a YAML file containing database settings]:yaml file:_files"

dotfiles/zshrc.completions/_msfvenom

@@ -0,0 +1,100 @@
+#compdef msfvenom
+# ------------------------------------------------------------------------------
+# Copyright (c) 2014 Spencer McIntyre
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in the
+#     documentation and/or other materials provided with the distribution.
+#   * Neither the name of the project nor the
+#     names of its contributors may be used to endorse or promote products
+#     derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+# Description
+# -----------
+#
+#  Completion script for the Metasploit Framework's msfvenom command
+#  (http://www.metasploit.com/).
+#
+# ------------------------------------------------------------------------------
+# Authors
+# -------
+#
+#  * Spencer McIntyre
+#
+# ------------------------------------------------------------------------------
+
+_msfvenom_encoders_list=(
+  'cmd/generic_sh'
+  'cmd/ifs'
+  'cmd/powershell_base64'
+  'cmd/printf_php_mq'
+  'generic/eicar'
+  'generic/none'
+  'mipsbe/byte_xori'
+  'mipsbe/longxor'
+  'mipsle/byte_xori'
+  'mipsle/longxor'
+  'php/base64'
+  'ppc/longxor'
+  'ppc/longxor_tag'
+  'sparc/longxor_tag'
+  'x64/xor'
+  'x86/add_sub'
+  'x86/alpha_mixed'
+  'x86/alpha_upper'
+  'x86/avoid_underscore_tolower'
+  'x86/avoid_utf8_tolower'
+  'x86/bloxor'
+  'x86/call4_dword_xor'
+  'x86/context_cpuid'
+  'x86/context_stat'
+  'x86/context_time'
+  'x86/countdown'
+  'x86/fnstenv_mov'
+  'x86/jmp_call_additive'
+  'x86/nonalpha'
+  'x86/nonupper'
+  'x86/opt_sub'
+  'x86/shikata_ga_nai'
+  'x86/single_static_bit'
+  'x86/unicode_mixed'
+  'x86/unicode_upper'
+)
+
+_msfvenom_encoder() {
+  _describe -t encoders 'available encoders' _msfvenom_encoders_list || compadd "$@"
+}
+
+_arguments \
+  {-a,--arch}"[The architecture to encode as]:architecture:(cmd generic mipsbe mipsle php ppc sparc x64 x86)" \
+  {-b,--bad-chars}"[The list of characters to avoid, example: '\x00\xff']:bad characters" \
+  {-c,--add-code}"[Specify an additional win32 shellcode file to include]:shellcode file:_files" \
+  {-e,--encoder}"[The encoder to use]:encoder:_msfvenom_encoder" \
+  {-f,--format}"[Output format]:output format:(bash c csharp dw dword java js_be js_le num perl pl powershell ps1 py python raw rb ruby sh vbapplication vbscript asp aspx aspx-exe dll elf exe exe-only exe-service exe-small loop-vbs macho msi msi-nouac osx-app psh psh-net psh-reflection vba vba-exe vbs war)" \
+  "--help-formats[List available formats]" \
+  {-h,--help}"[Help banner]" \
+  {-i,--iterations}"[The number of times to encode the payload]:iterations" \
+  {-k,--keep}"[Preserve the template behavior and inject the payload as a new thread]" \
+  {-l,--list}"[List a module type]:module type:(all encoders nops payloads)" \
+  {-n,--nopsled}"[Prepend a nopsled of length size on to the payload]:nopsled length" \
+  {-o,--options}"[List the payload's standard options]" \
+  "--platform[The platform to encode for]:target platform:(android bsd bsdi java linux netware nodejs osx php python ruby solaris unix win)" \
+  {-p,--payload}"[Payload to use. Specify a '-' or stdin to use custom payloads]:payload" \
+  {-s,--space}"[The maximum size of the resulting payload]:length" \
+  {-x,--template}"[Specify an alternate executable template]:template file:_files"

dotfiles/zshrc.d/_zsh-history-substring-search.zsh

@@ -0,0 +1,759 @@
+#!/usr/bin/env zsh
+##############################################################################
+#
+# Copyright (c) 2009 Peter Stephenson
+# Copyright (c) 2011 Guido van Steen
+# Copyright (c) 2011 Suraj N. Kurapati
+# Copyright (c) 2011 Sorin Ionescu
+# Copyright (c) 2011 Vincent Guerci
+# Copyright (c) 2016 Geza Lore
+# Copyright (c) 2017 Bengt Brodersen
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  * Redistributions in binary form must reproduce the above
+#    copyright notice, this list of conditions and the following
+#    disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#
+#  * Neither the name of the FIZSH nor the names of its contributors
+#    may be used to endorse or promote products derived from this
+#    software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+##############################################################################
+
+#-----------------------------------------------------------------------------
+# declare global configuration variables
+#-----------------------------------------------------------------------------
+
+typeset -g HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND='bg=magenta,fg=white,bold'
+typeset -g HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND='bg=red,fg=white,bold'
+typeset -g HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS='i'
+typeset -g HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE=''
+typeset -g HISTORY_SUBSTRING_SEARCH_FUZZY=''
+
+#-----------------------------------------------------------------------------
+# declare internal global variables
+#-----------------------------------------------------------------------------
+
+typeset -g BUFFER MATCH MBEGIN MEND CURSOR
+typeset -g _history_substring_search_refresh_display
+typeset -g _history_substring_search_query_highlight
+typeset -g _history_substring_search_result
+typeset -g _history_substring_search_query
+typeset -g -a _history_substring_search_query_parts
+typeset -g -a _history_substring_search_raw_matches
+typeset -g -i _history_substring_search_raw_match_index
+typeset -g -a _history_substring_search_matches
+typeset -g -i _history_substring_search_match_index
+typeset -g -A _history_substring_search_unique_filter
+
+#-----------------------------------------------------------------------------
+# the main ZLE widgets
+#-----------------------------------------------------------------------------
+
+history-substring-search-up() {
+  _history-substring-search-begin
+
+  _history-substring-search-up-history ||
+  _history-substring-search-up-buffer ||
+  _history-substring-search-up-search
+
+  _history-substring-search-end
+}
+
+history-substring-search-down() {
+  _history-substring-search-begin
+
+  _history-substring-search-down-history ||
+  _history-substring-search-down-buffer ||
+  _history-substring-search-down-search
+
+  _history-substring-search-end
+}
+
+zle -N history-substring-search-up
+zle -N history-substring-search-down
+
+#-----------------------------------------------------------------------------
+# implementation details
+#-----------------------------------------------------------------------------
+
+zmodload -F zsh/parameter
+
+#
+# We have to "override" some keys and widgets if the
+# zsh-syntax-highlighting plugin has not been loaded:
+#
+# https://github.com/nicoulaj/zsh-syntax-highlighting
+#
+if [[ $+functions[_zsh_highlight] -eq 0 ]]; then
+  #
+  # Dummy implementation of _zsh_highlight() that
+  # simply removes any existing highlights when the
+  # user inserts printable characters into $BUFFER.
+  #
+  _zsh_highlight() {
+    if [[ $KEYS == [[:print:]] ]]; then
+      region_highlight=()
+    fi
+  }
+
+  #
+  # The following snippet was taken from the zsh-syntax-highlighting project:
+  #
+  # https://github.com/zsh-users/zsh-syntax-highlighting/blob/56b134f5d62ae3d4e66c7f52bd0cc2595f9b305b/zsh-syntax-highlighting.zsh#L126-161
+  #
+  # Copyright (c) 2010-2011 zsh-syntax-highlighting contributors
+  # All rights reserved.
+  #
+  # Redistribution and use in source and binary forms, with or without
+  # modification, are permitted provided that the following conditions are
+  # met:
+  #
+  #  * Redistributions of source code must retain the above copyright
+  #    notice, this list of conditions and the following disclaimer.
+  #
+  #  * Redistributions in binary form must reproduce the above copyright
+  #    notice, this list of conditions and the following disclaimer in the
+  #    documentation and/or other materials provided with the distribution.
+  #
+  #  * Neither the name of the zsh-syntax-highlighting contributors nor the
+  #    names of its contributors may be used to endorse or promote products
+  #    derived from this software without specific prior written permission.
+  #
+  # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+  # IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+  # THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+  # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+  # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+  # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+  # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+  # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+  # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  #
+  #--------------8<-------------------8<-------------------8<-----------------
+  # Rebind all ZLE widgets to make them invoke _zsh_highlights.
+  _zsh_highlight_bind_widgets()
+  {
+    # Load ZSH module zsh/zleparameter, needed to override user defined widgets.
+    zmodload zsh/zleparameter 2>/dev/null || {
+      echo 'zsh-syntax-highlighting: failed loading zsh/zleparameter.' >&2
+      return 1
+    }
+
+    # Override ZLE widgets to make them invoke _zsh_highlight.
+    local cur_widget
+    for cur_widget in ${${(f)"$(builtin zle -la)"}:#(.*|_*|orig-*|run-help|which-command|beep|yank*)}; do
+      case $widgets[$cur_widget] in
+
+        # Already rebound event: do nothing.
+        user:$cur_widget|user:_zsh_highlight_widget_*);;
+
+        # User defined widget: override and rebind old one with prefix "orig-".
+        user:*) eval "zle -N orig-$cur_widget ${widgets[$cur_widget]#*:}; \
+                      _zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
+                      zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
+
+        # Completion widget: override and rebind old one with prefix "orig-".
+        completion:*) eval "zle -C orig-$cur_widget ${${widgets[$cur_widget]#*:}/:/ }; \
+                            _zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
+                            zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
+
+        # Builtin widget: override and make it call the builtin ".widget".
+        builtin) eval "_zsh_highlight_widget_$cur_widget() { builtin zle .$cur_widget -- \"\$@\" && _zsh_highlight }; \
+                       zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
+
+        # Default: unhandled case.
+        *) echo "zsh-syntax-highlighting: unhandled ZLE widget '$cur_widget'" >&2 ;;
+      esac
+    done
+  }
+  #-------------->8------------------->8------------------->8-----------------
+
+  _zsh_highlight_bind_widgets
+fi
+
+_history-substring-search-begin() {
+  setopt localoptions extendedglob
+
+  _history_substring_search_refresh_display=
+  _history_substring_search_query_highlight=
+
+  #
+  # If the buffer is the same as the previously displayed history substring
+  # search result, then just keep stepping through the match list. Otherwise
+  # start a new search.
+  #
+  if [[ -n $BUFFER && $BUFFER == ${_history_substring_search_result:-} ]]; then
+    return;
+  fi
+
+  #
+  # Clear the previous result.
+  #
+  _history_substring_search_result=''
+
+  if [[ -z $BUFFER ]]; then
+    #
+    # If the buffer is empty, we will just act like up-history/down-history
+    # in ZSH, so we do not need to actually search the history. This should
+    # speed things up a little.
+    #
+    _history_substring_search_query=
+    _history_substring_search_query_parts=()
+    _history_substring_search_raw_matches=()
+
+  else
+    #
+    # For the purpose of highlighting we keep a copy of the original
+    # query string.
+    #
+    _history_substring_search_query=$BUFFER
+
+    #
+    # compose search pattern
+    #
+    if [[ -n $HISTORY_SUBSTRING_SEARCH_FUZZY ]]; then
+      #
+      # `=` split string in arguments
+      #
+      _history_substring_search_query_parts=(${=_history_substring_search_query})
+    else
+      _history_substring_search_query_parts=(${==_history_substring_search_query})
+    fi
+
+    #
+    # Escape and join query parts with wildcard character '*' as seperator
+    # `(j:CHAR:)` join array to string with CHAR as seperator
+    #
+    local search_pattern="*${(j:*:)_history_substring_search_query_parts[@]//(#m)[\][()|\\*?#<>~^]/\\$MATCH}*"
+
+    #
+    # Find all occurrences of the search pattern in the history file.
+    #
+    # (k) returns the "keys" (history index numbers) instead of the values
+    # (R) returns values in reverse older, so the index of the youngest
+    # matching history entry is at the head of the list.
+    #
+    _history_substring_search_raw_matches=(${(k)history[(R)(#$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)${search_pattern}]})
+  fi
+
+  #
+  # In order to stay as responsive as possible, we will process the raw
+  # matches lazily (when the user requests the next match) to choose items
+  # that need to be displayed to the user.
+  # _history_substring_search_raw_match_index holds the index of the last
+  # unprocessed entry in _history_substring_search_raw_matches. Any items
+  # that need to be displayed will be added to
+  # _history_substring_search_matches.
+  #
+  # We use an associative array (_history_substring_search_unique_filter) as
+  # a 'set' data structure to ensure uniqueness of the results if desired.
+  # If an entry (key) is in the set (non-empty value), then we have already
+  # added that entry to _history_substring_search_matches.
+  #
+  _history_substring_search_raw_match_index=0
+  _history_substring_search_matches=()
+  _history_substring_search_unique_filter=()
+
+  #
+  # If $_history_substring_search_match_index is equal to
+  # $#_history_substring_search_matches + 1, this indicates that we
+  # are beyond the end of $_history_substring_search_matches and that we
+  # have also processed all entries in
+  # _history_substring_search_raw_matches.
+  #
+  # If $#_history_substring_search_match_index is equal to 0, this indicates
+  # that we are beyond the beginning of $_history_substring_search_matches.
+  #
+  # If we have initially pressed "up" we have to initialize
+  # $_history_substring_search_match_index to 0 so that it will be
+  # incremented to 1.
+  #
+  # If we have initially pressed "down" we have to initialize
+  # $_history_substring_search_match_index to 1 so that it will be
+  # decremented to 0.
+  #
+  if [[ $WIDGET == history-substring-search-down ]]; then
+     _history_substring_search_match_index=1
+  else
+    _history_substring_search_match_index=0
+  fi
+}
+
+_history-substring-search-end() {
+  setopt localoptions extendedglob
+
+  _history_substring_search_result=$BUFFER
+
+  # the search was successful so display the result properly by clearing away
+  # existing highlights and moving the cursor to the end of the result buffer
+  if [[ $_history_substring_search_refresh_display -eq 1 ]]; then
+    region_highlight=()
+    CURSOR=${#BUFFER}
+  fi
+
+  # highlight command line using zsh-syntax-highlighting
+  _zsh_highlight
+
+  # highlight the search query inside the command line
+  if [[ -n $_history_substring_search_query_highlight ]]; then
+    # highlight first matching query parts
+    local highlight_start_index=0
+    local highlight_end_index=0
+    local query_part
+    for query_part in $_history_substring_search_query_parts; do
+      local escaped_query_part=${query_part//(#m)[\][()|\\*?#<>~^]/\\$MATCH}
+      # (i) get index of pattern
+      local query_part_match_index="${${BUFFER:$highlight_start_index}[(i)(#$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)${escaped_query_part}]}"
+      if [[ $query_part_match_index -le ${#BUFFER:$highlight_start_index} ]]; then
+        highlight_start_index=$(( $highlight_start_index + $query_part_match_index ))
+        highlight_end_index=$(( $highlight_start_index + ${#query_part} ))
+        region_highlight+=("$(($highlight_start_index - 1)) $(($highlight_end_index - 1)) $_history_substring_search_query_highlight")
+      fi
+    done
+  fi
+
+  # For debugging purposes:
+  # zle -R "mn: "$_history_substring_search_match_index" m#: "${#_history_substring_search_matches}
+  # read -k -t 200 && zle -U $REPLY
+
+  # Exit successfully from the history-substring-search-* widgets.
+  return 0
+}
+
+_history-substring-search-up-buffer() {
+  #
+  # Check if the UP arrow was pressed to move the cursor within a multi-line
+  # buffer. This amounts to three tests:
+  #
+  # 1. $#buflines -gt 1.
+  #
+  # 2. $CURSOR -ne $#BUFFER.
+  #
+  # 3. Check if we are on the first line of the current multi-line buffer.
+  #    If so, pressing UP would amount to leaving the multi-line buffer.
+  #
+  #    We check this by adding an extra "x" to $LBUFFER, which makes
+  #    sure that xlbuflines is always equal to the number of lines
+  #    until $CURSOR (including the line with the cursor on it).
+  #
+  local buflines XLBUFFER xlbuflines
+  buflines=(${(f)BUFFER})
+  XLBUFFER=$LBUFFER"x"
+  xlbuflines=(${(f)XLBUFFER})
+
+  if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xlbuflines -ne 1 ]]; then
+    zle up-line-or-history
+    return 0
+  fi
+
+  return 1
+}
+
+_history-substring-search-down-buffer() {
+  #
+  # Check if the DOWN arrow was pressed to move the cursor within a multi-line
+  # buffer. This amounts to three tests:
+  #
+  # 1. $#buflines -gt 1.
+  #
+  # 2. $CURSOR -ne $#BUFFER.
+  #
+  # 3. Check if we are on the last line of the current multi-line buffer.
+  #    If so, pressing DOWN would amount to leaving the multi-line buffer.
+  #
+  #    We check this by adding an extra "x" to $RBUFFER, which makes
+  #    sure that xrbuflines is always equal to the number of lines
+  #    from $CURSOR (including the line with the cursor on it).
+  #
+  local buflines XRBUFFER xrbuflines
+  buflines=(${(f)BUFFER})
+  XRBUFFER="x"$RBUFFER
+  xrbuflines=(${(f)XRBUFFER})
+
+  if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xrbuflines -ne 1 ]]; then
+    zle down-line-or-history
+    return 0
+  fi
+
+  return 1
+}
+
+_history-substring-search-up-history() {
+  #
+  # Behave like up in ZSH, except clear the $BUFFER
+  # when beginning of history is reached like in Fish.
+  #
+  if [[ -z $_history_substring_search_query ]]; then
+
+    # we have reached the absolute top of history
+    if [[ $HISTNO -eq 1 ]]; then
+      BUFFER=
+
+    # going up from somewhere below the top of history
+    else
+      zle up-line-or-history
+    fi
+
+    return 0
+  fi
+
+  return 1
+}
+
+_history-substring-search-down-history() {
+  #
+  # Behave like down-history in ZSH, except clear the
+  # $BUFFER when end of history is reached like in Fish.
+  #
+  if [[ -z $_history_substring_search_query ]]; then
+
+    # going down from the absolute top of history
+    if [[ $HISTNO -eq 1 && -z $BUFFER ]]; then
+      BUFFER=${history[1]}
+      _history_substring_search_refresh_display=1
+
+    # going down from somewhere above the bottom of history
+    else
+      zle down-line-or-history
+    fi
+
+    return 0
+  fi
+
+  return 1
+}
+
+_history_substring_search_process_raw_matches() {
+  #
+  # Process more outstanding raw matches and append any matches that need to
+  # be displayed to the user to _history_substring_search_matches.
+  # Return whether there were any more results appended.
+  #
+
+  #
+  # While we have more raw matches. Process them to see if there are any more
+  # matches that need to be displayed to the user.
+  #
+  while [[ $_history_substring_search_raw_match_index -lt $#_history_substring_search_raw_matches ]]; do
+    #
+    # Move on to the next raw entry and get its history index.
+    #
+    _history_substring_search_raw_match_index+=1
+    local index=${_history_substring_search_raw_matches[$_history_substring_search_raw_match_index]}
+
+    #
+    # If HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set to a non-empty value,
+    # then ensure that only unique matches are presented to the user.
+    # When HIST_IGNORE_ALL_DUPS is set, ZSH already ensures a unique history,
+    # so in this case we do not need to do anything.
+    #
+    if [[ ! -o HIST_IGNORE_ALL_DUPS && -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
+      #
+      # Get the actual history entry at the new index, and check if we have
+      # already added it to _history_substring_search_matches.
+      #
+      local entry=${history[$index]}
+
+      if [[ -z ${_history_substring_search_unique_filter[$entry]} ]]; then
+        #
+        # This is a new unique entry. Add it to the filter and append the
+        # index to _history_substring_search_matches.
+        #
+        _history_substring_search_unique_filter[$entry]=1
+        _history_substring_search_matches+=($index)
+
+        #
+        # Indicate that we did find a match.
+        #
+        return 0
+      fi
+
+    else
+      #
+      # Just append the new history index to the processed matches.
+      #
+      _history_substring_search_matches+=($index)
+
+      #
+      # Indicate that we did find a match.
+      #
+      return 0
+    fi
+
+  done
+
+  #
+  # We are beyond the end of the list of raw matches. Indicate that no
+  # more matches are available.
+  #
+  return 1
+}
+
+_history-substring-search-has-next() {
+  #
+  # Predicate function that returns whether any more older matches are
+  # available.
+  #
+
+  if  [[ $_history_substring_search_match_index -lt $#_history_substring_search_matches ]]; then
+    #
+    # We did not reach the end of the processed list, so we do have further
+    # matches.
+    #
+    return 0
+
+  else
+    #
+    # We are at the end of the processed list. Try to process further
+    # unprocessed matches. _history_substring_search_process_raw_matches
+    # returns whether any more matches were available, so just return
+    # that result.
+    #
+    _history_substring_search_process_raw_matches
+    return $?
+  fi
+}
+
+_history-substring-search-has-prev() {
+  #
+  # Predicate function that returns whether any more younger matches are
+  # available.
+  #
+
+  if [[ $_history_substring_search_match_index -gt 1 ]]; then
+    #
+    # We did not reach the beginning of the processed list, so we do have
+    # further matches.
+    #
+    return 0
+
+  else
+    #
+    # We are at the beginning of the processed list. We do not have any more
+    # matches.
+    #
+    return 1
+  fi
+}
+
+_history-substring-search-found() {
+  #
+  # A match is available. The index of the match is held in
+  # $_history_substring_search_match_index
+  #
+  # 1. Make $BUFFER equal to the matching history entry.
+  #
+  # 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
+  #    to highlight the current buffer.
+  #
+  BUFFER=$history[$_history_substring_search_matches[$_history_substring_search_match_index]]
+  _history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
+}
+
+_history-substring-search-not-found() {
+  #
+  # No more matches are available.
+  #
+  # 1. Make $BUFFER equal to $_history_substring_search_query so the user can
+  #    revise it and search again.
+  #
+  # 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
+  #    to highlight the current buffer.
+  #
+  BUFFER=$_history_substring_search_query
+  _history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
+}
+
+_history-substring-search-up-search() {
+  _history_substring_search_refresh_display=1
+
+  #
+  # Select history entry during history-substring-down-search:
+  #
+  # The following variables have been initialized in
+  # _history-substring-search-up/down-search():
+  #
+  # $_history_substring_search_matches is the current list of matches that
+  # need to be displayed to the user.
+  # $_history_substring_search_match_index is the index of the current match
+  # that is being displayed to the user.
+  #
+  # The range of values that $_history_substring_search_match_index can take
+  # is: [0, $#_history_substring_search_matches + 1].  A value of 0
+  # indicates that we are beyond the beginning of
+  # $_history_substring_search_matches. A value of
+  # $#_history_substring_search_matches + 1 indicates that we are beyond
+  # the end of $_history_substring_search_matches and that we have also
+  # processed all entries in _history_substring_search_raw_matches.
+  #
+  # If $_history_substring_search_match_index equals
+  # $#_history_substring_search_matches and
+  # $_history_substring_search_raw_match_index is not greater than
+  # $#_history_substring_search_raw_matches, then we need to further process
+  # $_history_substring_search_raw_matches to see if there are any more
+  # entries that need to be displayed to the user.
+  #
+  # In _history-substring-search-up-search() the initial value of
+  # $_history_substring_search_match_index is 0. This value is set in
+  # _history-substring-search-begin(). _history-substring-search-up-search()
+  # will initially increment it to 1.
+  #
+
+  if [[ $_history_substring_search_match_index -gt $#_history_substring_search_matches ]]; then
+    #
+    # We are beyond the end of $_history_substring_search_matches. This
+    # can only happen if we have also exhausted the unprocessed matches in
+    # _history_substring_search_raw_matches.
+    #
+    # 1. Update display to indicate search not found.
+    #
+    _history-substring-search-not-found
+    return
+  fi
+
+  if _history-substring-search-has-next; then
+    #
+    # We do have older matches.
+    #
+    # 1. Move index to point to the next match.
+    # 2. Update display to indicate search found.
+    #
+    _history_substring_search_match_index+=1
+    _history-substring-search-found
+
+  else
+    #
+    # We do not have older matches.
+    #
+    # 1. Move the index beyond the end of
+    #    _history_substring_search_matches.
+    # 2. Update display to indicate search not found.
+    #
+    _history_substring_search_match_index+=1
+    _history-substring-search-not-found
+  fi
+
+  #
+  # When HIST_FIND_NO_DUPS is set, meaning that only unique command lines from
+  # history should be matched, make sure the new and old results are different.
+  #
+  # However, if the HIST_IGNORE_ALL_DUPS shell option, or
+  # HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set, then we already have a
+  # unique history, so in this case we do not need to do anything.
+  #
+  if [[ -o HIST_IGNORE_ALL_DUPS || -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
+    return
+  fi
+
+  if [[ -o HIST_FIND_NO_DUPS && $BUFFER == $_history_substring_search_result ]]; then
+    #
+    # Repeat the current search so that a different (unique) match is found.
+    #
+    _history-substring-search-up-search
+  fi
+}
+
+_history-substring-search-down-search() {
+  _history_substring_search_refresh_display=1
+
+  #
+  # Select history entry during history-substring-down-search:
+  #
+  # The following variables have been initialized in
+  # _history-substring-search-up/down-search():
+  #
+  # $_history_substring_search_matches is the current list of matches that
+  # need to be displayed to the user.
+  # $_history_substring_search_match_index is the index of the current match
+  # that is being displayed to the user.
+  #
+  # The range of values that $_history_substring_search_match_index can take
+  # is: [0, $#_history_substring_search_matches + 1].  A value of 0
+  # indicates that we are beyond the beginning of
+  # $_history_substring_search_matches. A value of
+  # $#_history_substring_search_matches + 1 indicates that we are beyond
+  # the end of $_history_substring_search_matches and that we have also
+  # processed all entries in _history_substring_search_raw_matches.
+  #
+  # In _history-substring-search-down-search() the initial value of
+  # $_history_substring_search_match_index is 1. This value is set in
+  # _history-substring-search-begin(). _history-substring-search-down-search()
+  # will initially decrement it to 0.
+  #
+
+  if [[ $_history_substring_search_match_index -lt 1 ]]; then
+    #
+    # We are beyond the beginning of $_history_substring_search_matches.
+    #
+    # 1. Update display to indicate search not found.
+    #
+    _history-substring-search-not-found
+    return
+  fi
+
+  if _history-substring-search-has-prev; then
+    #
+    # We do have younger matches.
+    #
+    # 1. Move index to point to the previous match.
+    # 2. Update display to indicate search found.
+    #
+    _history_substring_search_match_index+=-1
+    _history-substring-search-found
+
+  else
+    #
+    # We do not have younger matches.
+    #
+    # 1. Move the index beyond the beginning of
+    #    _history_substring_search_matches.
+    # 2. Update display to indicate search not found.
+    #
+    _history_substring_search_match_index+=-1
+    _history-substring-search-not-found
+  fi
+
+  #
+  # When HIST_FIND_NO_DUPS is set, meaning that only unique command lines from
+  # history should be matched, make sure the new and old results are different.
+  #
+  # However, if the HIST_IGNORE_ALL_DUPS shell option, or
+  # HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set, then we already have a
+  # unique history, so in this case we do not need to do anything.
+  #
+  if [[ -o HIST_IGNORE_ALL_DUPS || -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
+    return
+  fi
+
+  if [[ -o HIST_FIND_NO_DUPS && $BUFFER == $_history_substring_search_result ]]; then
+    #
+    # Repeat the current search so that a different (unique) match is found.
+    #
+    _history-substring-search-down-search
+  fi
+}
+
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et

dotfiles/zshrc.d/assemble.zsh

@@ -1,4 +1,4 @@
-if [ -f "`command which nasm`" -a -f "`command which objdump`" ] ; then
+if [ -f "`command which nasm 2>/dev/null`" -a -f "`command which objdump 2>/dev/null`" ] ; then
   assemble_shellcode() {
     if [ -z "$1" ] ; then echo "Usage: $0 <assembly file>" >&2 ; return 1 ; fi
     local NASM=`command which nasm`

dotfiles/zshrc.d/crouton.zsh

@@ -0,0 +1,7 @@
+if command -v xiwi >/dev/null 2>&1; then
+  function xiwibg {
+    local tmpf=$(mktemp)
+    echo Logging to ${tmpf}
+    nohup xiwi "$@" >!${tmpf} 2>&1 &
+  }
+fi

dotfiles/zshrc.d/gcloud.zsh

@@ -0,0 +1,17 @@
+#!/bin/zsh
+
+GCL=${HOME}/tools/gcloud
+
+if [ ! -d ${GCL} ] ; then
+  return
+fi
+
+# Add bin to path
+export PATH="${PATH}:${GCL}/bin"
+
+# Load completion
+source ${GCL}/completion.zsh.inc
+
+which kubectl 2>/dev/null >&2 && \
+  source <(kubectl completion zsh) || \
+  true

dotfiles/zshrc.d/gpg.zsh

@@ -0,0 +1,44 @@
+if ! which gpg-agent >/dev/null 2>&1 ; then
+  return 1
+fi
+
+# Set the default paths to gpg-agent files.
+_gpg_agent_conf="${GNUPGHOME:-$HOME/.gnupg}/gpg-agent.conf"
+_gpg_agent_env="${TMPDIR:-/tmp}/gpg-agent.env.$UID"
+
+# Load environment variables from previous run
+source "$_gpg_agent_env" 2> /dev/null
+
+# Start gpg-agent if not started.
+if [[ -z "$GPG_AGENT_INFO" && ! -S "${GNUPGHOME:-$HOME/.gnupg}/S.gpg-agent" ]]; then
+  # Start gpg-agent if not started.
+  if ! ps -U "$LOGNAME" -o pid,ucomm | grep -q -- "${${${(s.:.)GPG_AGENT_INFO}[2]}:--1} gpg-agent"; then
+    eval "$(gpg-agent --daemon 2>/dev/null | tee "$_gpg_agent_env")"
+  fi
+fi
+
+# Inform gpg-agent of the current TTY for user prompts.
+export GPG_TTY="$(tty)"
+
+# Integrate with the SSH module.
+if grep '^enable-ssh-support' "$_gpg_agent_conf" &> /dev/null; then
+  # Load required functions.
+  autoload -Uz add-zsh-hook
+
+  # Override the ssh-agent environment file default path.
+  _ssh_agent_env="$_gpg_agent_env"
+
+  # Updates the GPG-Agent TTY before every command since SSH does not set it.
+  function _gpg-agent-update-tty {
+    gpg-connect-agent UPDATESTARTUPTTY /bye >/dev/null
+  }
+  add-zsh-hook preexec _gpg-agent-update-tty
+fi
+
+# Clean up.
+unset _gpg_agent_{conf,env}
+
+# Disable GUI prompts inside SSH.
+if [[ -n "$SSH_CONNECTION" ]]; then
+  export PINENTRY_USER_DATA='USE_CURSES=1'
+fi

dotfiles/zshrc.d/history.zsh

@@ -0,0 +1,26 @@
+histmode() {
+  # This is very brittle as it assumes we're the only user of fc
+  case "$1" in
+    on)
+      if [ "$HISTDISABLED" -ne 1 ] ; then
+        echo "History is not disabled." >&2
+        return 1
+      fi
+      fc -P
+      HISTDISABLED=0
+      echo "History enabled."
+      ;;
+    off)
+      if [ "$HISTDISABLED" -eq 1 ] ; then
+        echo "History is already disabled." >&2
+        return 1
+      fi
+      HISTDISABLED=1
+      fc -p /dev/null $HISTSIZE 0
+      echo "History disabled."
+      ;;
+    *)
+      echo "Unknown command." >&2
+      ;;
+  esac
+}

dotfiles/zshrc.d/ipython.zsh

@@ -0,0 +1,3 @@
+if which ipython >/dev/null 2>/dev/null ; then
+  export PYTHONSTARTUP="${HOME}/.ipython.py"
+fi

dotfiles/zshrc.d/jekyll.zsh

@@ -0,0 +1,151 @@
+function _jekyll_locate_dir {
+  if [[ -n "${JEKYLL_DIR}" && -f "${JEKYLL_DIR}" ]] ; then
+    echo ${JEKYLL_DIR}
+  elif test -f `pwd`/_config.yml ; then
+    pwd
+  elif test -f ${HOME}/Projects/blog/_config.yml ; then
+    echo ${HOME}/Projects/blog
+  else
+    echo "Jekyll instance not found!" >&2
+  fi
+}
+
+function _jekyll_set_date {
+  local FILENAME
+  local DATE
+  FILENAME=${1}
+  DATE=${2}
+  sed -i "2,/---/{s/^date:.*$/date: ${DATE}/;s/---/date: ${DATE}\n---/}" ${FILENAME}
+}
+
+function _jekyll_find_post {
+  local files
+  local fname
+  local jekyll_dir
+
+  jekyll_dir="${3}"
+
+  if [ -f "${1}" ] ; then
+    printf -- "${1}"
+    return 0
+  fi
+  if [ -f "${jekyll_dir}/_posts/${1}" ] ; then
+    printf -- "${jekyll_dir}/_posts/${1}"
+    return 0
+  fi
+  if [ -f "${jekyll_dir}/_drafts/${1}" ] ; then
+    printf -- "${jekyll_dir}/_drafts/${1}"
+    return 0
+  fi
+  fname=${2:-${1}}
+  files=(${jekyll_dir}/_posts/*${fname}* ${jekyll_dir}/_drafts/*${fname}*)
+  if [ ${#files} -eq "0" ] ; then
+    echo "No post found for ${fname}" >&2
+    return 1
+  fi
+  if [ ${#files} -gt "1" ] ; then
+    echo "Ambiguous results: ${files}" >&2
+    return 1
+  fi
+  printf -- ${files}
+  return 0
+}
+
+function jekyll {
+  setopt localoptions nullglob
+  local JTEMPLATE
+  local TITLE
+  local SLUG
+  local FILENAME
+  local DATE
+  local NEWNAME
+  local JEKYLL_DIR
+  local EDITOR=${EDITOR:-vim}
+
+  JEKYLL_DIR=`_jekyll_locate_dir`
+
+  if [ -z "${JEKYLL_DIR}" ] ; then
+    return 1
+  fi
+
+  JTEMPLATE="---\n"
+  JTEMPLATE+="layout: post\n"
+  JTEMPLATE+="title: \"%s\"\n"
+  JTEMPLATE+="category: Blog\n"
+  JTEMPLATE+="---\n\n"
+  TITLE=${@[2,-1]}
+  SLUG=$(echo -n ${TITLE} |
+    tr A-Z a-z |                      # Everything in lower case
+    tr -d "'" |                       # Remove single quotes entirely
+    tr -c -s -- a-z0-9 - |            # Replace non-alphanums with dashes
+    sed 's/^-*\([^-].*[^-]\)-*$/\1/'  # Remove leading and trailing slashes
+  )
+  TITLE=$(echo ${TITLE} | sed 's/\\/\\\\/g;s/"/\\"/g')
+  DATE=`date +%Y-%m-%d`
+
+  case "${1:-help}" in
+    help|--help)
+      command jekyll help
+      echo "Added by zsh plugin:"
+      echo "  draft                 Create a new draft post."
+      echo "  post                  Create a new post to publish immediately."
+      echo "  publish               Publish a draft post by name."
+      echo "  edit                  Edit a post."
+      echo "  dev                   Run local server with drafts and incremental."
+      ;;
+    draft)
+      if [ -z "${SLUG}" ] ; then
+        echo "slug is required."
+        return 1
+      fi
+      mkdir -p "${JEKYLL_DIR}/_drafts"
+      FILENAME="${JEKYLL_DIR}/_drafts/${SLUG}.md"
+      printf -- "${JTEMPLATE}" "${TITLE}" > "${FILENAME}"
+      ${EDITOR} "${FILENAME}" '+$' '+startinsert'
+      ;;
+    post)
+      if [ -z "${SLUG}" ] ; then
+        echo "slug is required."
+        return 1
+      fi
+      FILENAME="${JEKYLL_DIR}/_posts/${DATE}-${SLUG}.md"
+      printf -- "${JTEMPLATE}" "${TITLE}" > "${FILENAME}"
+      _jekyll_set_date "${FILENAME}" "${DATE}"
+      ${EDITOR} "${FILENAME}" '+$' '+startinsert'
+      ;;
+    publish)
+      if [ -z "${SLUG}" ] ; then
+        echo "slug is required."
+        return 1
+      fi
+      FILENAME=$(_jekyll_find_post "${TITLE}" "${SLUG}" "${JEKYLL_DIR}")
+      if [ $? -ne 0 ] ; then
+        return 1
+      fi
+      if ! [[ "${FILENAME}" =~ '/_drafts/' ]] ; then
+        echo "${FILENAME} is not a draft." >&2
+        return 1
+      fi
+      NEWNAME=$(echo "${FILENAME}" | sed "s/_drafts\//_posts\/${DATE}-/")
+      mv "${FILENAME}" "${NEWNAME}"
+      _jekyll_set_date "${NEWNAME}" "${DATE}"
+      ;;
+    edit)
+      if [ -z "${SLUG}" ] ; then
+        echo "slug is required."
+        return 1
+      fi
+      FILENAME=$(_jekyll_find_post "${TITLE}" "${SLUG}" "${JEKYLL_DIR}")
+      if [ $? -ne 0 ] ; then
+        return
+      fi
+      ${EDITOR} "${FILENAME}"
+      ;;
+    dev)
+      command jekyll serve -D -I "$@"
+      ;;
+    *)
+      command jekyll "$@"
+      ;;
+  esac
+}

dotfiles/zshrc.d/matir_prompt/prompt_matir_setup

@@ -0,0 +1,67 @@
+# vim: syntax=zsh
+
+function prompt_matir_setup {
+  autoload -Uz add-zsh-hook
+  autoload -Uz vcs_info
+  autoload -Uz colors
+
+  prompt_opts=(sp subst cr percent)
+
+  colors
+
+  add-zsh-hook precmd prompt_matir_precmd
+
+  # Git related styles
+  zstyle ':vcs_info:*' enable git
+  zstyle ':vcs_info:*' check-for-changes true
+  zstyle ':vcs_info:*' formats ' (%b%u%c)'
+  zstyle ':vcs_info:*' stagedstr '*'
+  zstyle ':vcs_info:*' unstagedstr '*'
+  zstyle ':vcs_info:git*+set-message:*' hooks git-untracked
+
+  PROMPT='%{$fg[black]%}[%{$fg[yellow]%}%h%{$fg[black]%}] '  # History #
+  PROMPT+='%{%(!.$fg[red].$fg[green])%}%8>..>%n%>>%{$fg[white]%}@'  # username@
+  PROMPT+='%{$fg[blue]%}%12>..>%m%>>%{$fg[white]%}:'  # hostname
+  PROMPT+='%{$fg[green]%}%32<...<%~%<<'  # path
+  PROMPT+='%{$fg[magenta]%}${VIRTUAL_ENV_SHORT}'  # virtualenv
+  PROMPT+='%{$fg[blue]%}${vcs_info_msg_0_}'  # VCS info
+  PROMPT+='%{$fg[white]%}%#%{$reset_color%} '  # prompt symbol
+
+  # Rprompt setup
+  local show_return='✘ '
+  RPROMPT='%(?:: %{$fg[red]%}'
+  RPROMPT+=${show_return}
+  RPROMPT+='%? '
+  RPROMPT+='%{$reset_color%})'
+  RPROMPT+='${PROMPT_VIMODE}'
+}
+
+function zle-keymap-select {
+  # Add prompt info
+  PROMPT_VIMODE="${${KEYMAP/vicmd/ [VICMD]}/(main|viins)/}"
+  zle reset-prompt
+}
+
+zle -N zle-keymap-select
+zle -N zle-line-init zle-keymap-select
+
+function prompt_matir_precmd {
+  vcs_info
+  if [ $VIRTUAL_ENV ] ; then
+    VIRTUAL_ENV_SHORT=" (py:$(basename $VIRTUAL_ENV))"
+  else
+    VIRTUAL_ENV_SHORT=""
+  fi
+}
+
+### git: Show marker (*) if there are untracked files in repository
+# Make sure you have added staged to your 'formats':  %c
+
++vi-git-untracked(){
+  if [[ $(git rev-parse --is-inside-work-tree 2> /dev/null) == 'true' ]] && \
+    git status --porcelain | grep '??' &> /dev/null ; then
+      hook_com[staged]+='*'
+  fi
+}
+
+prompt_matir_setup "$@"

dotfiles/zshrc.d/source_gnupg.zsh

@@ -1,6 +0,0 @@
-function source_gnupg {
-  GPG_ENV=${HOME}/.gnupg/gpg-agent.env
-  if test -f ${GPG_ENV} ; then
-    eval $(sed 's/^/export /' ${GPG_ENV})
-  fi
-}

install.sh

@@ -1,51 +1,94 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
-set nounset
-set errexit
+set -o nounset
+set -o errexit
+set -o shwordsplit 2>/dev/null || true  # Make zsh behave like bash
 
-function prerequisites {
-  if which zsh > /dev/null ; then
-    if [[ $- == *i* ]] ; then
-      if [[ `getent passwd $USER | cut -d: -f7` != */zsh ]] ; then
-        echo 'Enter password to change shell.' >&2
-        chsh -s `which zsh`
-      fi
-    fi
-    install_git https://github.com/robbyrussell/oh-my-zsh.git $HOME/.oh-my-zsh
+case $(uname) in
+  Linux)
+    FINDTYPE="-xtype"
+    ;;
+  Darwin|*BSD)
+    FINDTYPE="-type"
+    ;;
+  *)
+    echo "Unknown OS: $(uname), guessing no GNU utils."
+    FINDTYPE="-type"
+    ;;
+esac
+
+is_comment() {
+  if [ $(echo "${1}" | cut -c1-1) = '#' ] ; then
+    true
   else
-    echo "ZSH not found!" >&2
-  fi
-  if which vim > /dev/null ; then
-    mkdir -p $HOME/.vim/bundle
-    install_git https://github.com/VundleVim/Vundle.vim.git \
-      $HOME/.vim/bundle/Vundle.vim
-  fi
-  if which gdb > /dev/null ; then
-    install_git https://github.com/longld/peda.git $HOME/.peda
+    false
   fi
 }
 
-function install_dotfile_dir {
+prerequisites() {
+  if which zsh > /dev/null 2>&1 ; then
+    case $- in
+      *i*)
+        case `getent passwd $USER | cut -d: -f7` in
+          */zsh)
+            ;;
+          *)
+            if [ `id` -ne 0 ] ; then
+              echo 'Enter password to change shell.' >&2
+            fi
+            chsh -s `which zsh`
+            ;;
+        esac
+        ;;
+    esac
+  else
+    echo "ZSH not found!" >&2
+  fi
+}
+
+install_dotfile_dir() {
   local SRCDIR="${1}"
   local dotfile
+  local submodule_prune="$(git -C "${BASEDIR}" submodule status -- "${SRCDIR}" 2>/dev/null | \
+    awk '{print $2}' | \
+    while read submod ; do
+      echo -n " -o -path ${BASEDIR}/${submod}"
+    done)"
   find "${SRCDIR}" \( -name .git -o \
                     -path "${SRCDIR}/private_dotfiles" -o \
                     -name install.sh -o \
                     -name README.md -o \
-                    -name .gitignore \) \
-      -prune -o -xtype f -print | \
+                    -name .gitignore \
+                    ${submodule_prune} \) \
+      -prune -o ${FINDTYPE} f -print | \
     while read dotfile ; do
       local TARGET="${HOME}/.${dotfile#${SRCDIR}/}"
-      mkdir -p `dirname "${TARGET}"`
+      mkdir -p $(dirname "${TARGET}")
       ln -s -f "${dotfile}" "${TARGET}"
     done
+  git submodule status -- "${SRCDIR}" 2>/dev/null | \
+    awk '{print $2}' | \
+    while read submodule ; do
+      local FULLNAME="${BASEDIR}/${submodule}"
+      local TARGET="${HOME}/.${FULLNAME#${SRCDIR}/}"
+      mkdir -p $(dirname "${TARGET}")
+      if test -L "${TARGET}" ; then
+        if [ "$(readlink "${TARGET}")" != "${FULLNAME}" ] ; then
+          echo "${TARGET} points to $(readlink "${TARGET}") not ${FULLNAME}!" >/dev/stderr
+        fi
+      elif test -d "${TARGET}" ; then
+        echo "rm -rf ${TARGET}" >/dev/stderr
+      else
+        ln -s -f "${FULLNAME}" "${TARGET}"
+      fi
+    done
 }
 
-function install_basic_dir {
+install_basic_dir() {
   local SRCDIR="${1}"
   local DESTDIR="${2}"
   local file
-  find "${SRCDIR}" -xtype f -print | \
+  find "${SRCDIR}" ${FINDTYPE} f -print | \
     while read file ; do
     local TARGET="${2}/${file#${SRCDIR}/}"
     mkdir -p `dirname "${TARGET}"`
@@ -53,79 +96,75 @@ function install_basic_dir {
   done
 }
 
-function install_git {
+install_git() {
   # Install or update a git repository
   if ! which git > /dev/null ; then
     return 1
   fi
-  local REPO="${1}"
-  local DESTDIR="${2}"
-  if [[ -d ${DESTDIR}/.git ]] ; then
+  local REPO="${*: -2:1}"
+  local DESTDIR="${*: -1:1}"
+  set -- ${@:1:$(($#-2))}
+  if [ -d ${DESTDIR}/.git ] ; then
     ( cd ${DESTDIR} ; git pull -q )
   else
-    git clone ${REPO} ${DESTDIR}
+    if [ ${MINIMAL} -eq 1 ] ; then
+      git clone --depth 1 $* ${REPO} ${DESTDIR}
+    else
+      git clone $* ${REPO} ${DESTDIR}
+    fi
   fi
 }
 
-function add_bin_symlink {
+add_bin_symlink() {
   local LINKNAME=${HOME}/bin/${2:-`basename $1`}
-  if [[ -e ${LINKNAME} && ! -h ${LINKNAME} ]] ; then
+  if [ -e ${LINKNAME} -a ! -h ${LINKNAME} ] ; then
     echo "Refusing to overwrite ${LINKNAME}" >&2
     return 1
   fi
   ln -sf ${1} ${LINKNAME}
 }
 
-function postinstall {
-  # Install Vundle plugins
-  if [[ -d $HOME/.vim/bundle/Vundle.vim ]] ; then
-    vim +VundleInstall +qall
-  fi
-  # Install other useful tools
-  install_git https://github.com/trustedsec/ptf.git ${HOME}/bin/ptframework && \
-    add_bin_symlink ${HOME}/bin/ptframework/ptf
-  # Refresh all gpg keys
-  if test -x "`which gpg2`" ; then
-    gpg2 --refresh-keys
-  else
-    gpg --refresh-keys
-  fi
+postinstall() {
+  true
 }
 
-function ssh_key_already_installed {
+ssh_key_already_installed() {
   # Return 1 if the key isn't already installed, 0 if it is
   local AK="${HOME}/.ssh/authorized_keys"
-  if [[ ! -f $AK ]] ; then
+  if [ ! -f $AK ] ; then
     return 1
   fi
   local KEYFP=`ssh-keygen -l -f $1 2>/dev/null | awk '{print $2}'`
   local TMPF=`mktemp`
   local key
   while read key ; do
+    if is_comment "${key}" ; then
+      continue
+    fi
     echo "$key" > $TMPF
     local EFP=`ssh-keygen -l -f ${TMPF} 2>/dev/null | awk '{print $2}'`
-    if [[ "$EFP" == "$KEYFP" ]] ; then
+    if [ "$EFP" = "$KEYFP" ] ; then
       rm $TMPF 2>/dev/null
       return 0
     fi
-  done < <(grep -v '^#' ${AK})
+  done < ${AK}
   rm $TMPF 2>/dev/null
   return 1
 }
 
-function install_ssh_keys {
+install_ssh_keys() {
   # Install SSH keys
   verbose 'Installing SSH keys...'
   local AK="${HOME}/.ssh/authorized_keys"
   local key
   local keydir
-  if (( ${TRUST_ALL_KEYS} )) ; then
+  if test ${TRUST_ALL_KEYS} = 1 ; then
     keydir=${BASEDIR}/keys/ssh
   else
     keydir=${BASEDIR}/keys/ssh/trusted
   fi
   for key in ${keydir}/* ; do
-    if [[ ! -f ${key} ]] ; then
+    if [ ! -f "${key}" ] ; then
       continue
     fi
     if ssh_key_already_installed "${key}" ; then
@@ -137,44 +176,46 @@ function install_ssh_keys {
   done
 }
 
-function install_gpg_keys {
+install_gpg_keys() {
+  which gpg >/dev/null 2>&1 || \
+    return 0
   local key
   for key in ${BASEDIR}/keys/gpg/* ; do
     gpg --import < ${key} >/dev/null
   done
 }
 
-function install_known_hosts {
+install_known_hosts() {
   verbose 'Installing known hosts...' >&2
-  if [[ ! -f ${BASEDIR}/keys/known_hosts ]] ; then
+  if [ ! -f "${BASEDIR}/keys/known_hosts" ] ; then
     return 0
   fi
   mkdir -p ${HOME}/.ssh
-  if [[ -f ${HOME}/.ssh/known_hosts ]] ; then
+  if [ -f "${HOME}/.ssh/known_hosts" ] ; then
     local tmpf=`mktemp`
-    cat ${BASEDIR}/keys/known_hosts ${HOME}/.ssh/known_hosts | sort | uniq > $tmpf
+    cat ${BASEDIR}/keys/known_hosts ${HOME}/.ssh/known_hosts | sort -u > $tmpf
     mv $tmpf ${HOME}/.ssh/known_hosts
   else
     cp ${BASEDIR}/keys/known_hosts ${HOME}/.ssh/known_hosts
   fi
 }
 
-function install_keys {
+install_keys() {
   install_ssh_keys
   install_gpg_keys
   install_known_hosts
 }
 
-function is_deb_system {
+is_deb_system() {
   test -f /usr/bin/apt-get
 }
 
-function run_as_root {
+run_as_root() {
   # Attempt to run as root
-  if [[ ${USER} == "root" ]] ; then
+  if [ ${USER} = "root" ] ; then
     "$@"
     return $?
-  elif groups | grep -q '\bsudo\b' ; then
+  elif test -x $(which sudo 2>/dev/null) ; then
     verbose "Using sudo to run ${1}..."
     sudo "$@"
     return $?
@@ -182,24 +223,47 @@ function run_as_root {
   return 1
 }
 
-function install_pkg_set {
+install_pkg_set() {
   local pkg_file=${BASEDIR}/${1}
-  if [[ ! -f ${pkg_file} ]] ; then return 0 ; fi
-  run_as_root apt-get install -qqy `cat ${pkg_file}`
+  local pkg_list=""
+  if [ ! -f "${pkg_file}" ] ; then
+    echo "Package set $(basename ${pkg_file}) does not exist." 1>&2
+    return 1
+  fi
+  while read line ; do
+    if is_comment "${line}" ; then
+      continue
+    fi
+    if [ -z "${line}" ] ; then
+      continue
+    fi
+    if [ "$(apt-cache -q show ${line} 2>/dev/null)" != "" ] ; then
+      pkg_list="${pkg_list} ${line}"
+    else
+      echo "Warning: package ${line} not found." >&2
+    fi
+  done < ${pkg_file}
+  if [ -n "${pkg_list}" ] ; then
+    verbose "Installing ${pkg_list}"
+    run_as_root apt-get install -qqy ${pkg_list}
+  fi
 }
 
-function install_apt_pkgs {
+install_apt_pkgs() {
   run_as_root apt-get update -qq || \
     ( echo "Can't run apt-get commands" >&2 && \
       return 1 )
-  install_pkg_set packages
-  (( $HAVE_X )) && install_pkg_set packages.X
-  (( $IS_KALI )) && install_pkg_set packages.kali
+  install_pkg_set packages.minimal
+  if test $MINIMAL = 1 ; then
+    return 0
+  fi
+  test $HAVE_X = 1 && install_pkg_set packages.X
+  test $IS_KALI = 1 && install_pkg_set packages.kali
   install_pkg_set packages.${ARCH}
-  (( $HAVE_X )) && install_chrome
+  test $HAVE_X = 1 && install_chrome
 }
 
-function install_chrome {
+install_chrome() {
   local TMPD=`mktemp -d`
   local CHROME_ARCH=`echo ${ARCH} | sed 's/x86_64/amd64/'`
   dpkg-query -l 'google-chrome*' >/dev/null 2>&1 && return 0
@@ -211,19 +275,24 @@ function install_chrome {
   rm -rf ${TMPD}
 }
 
-function read_saved_prefs {
+read_saved_prefs() {
   # Can't use basedir here as we don't have it yet
-  local pref_file=`dirname $0`/installed-prefs
+  local old_pref_file=`dirname $0`/installed-prefs
+  local pref_file=`dirname $0`/.installed-prefs
+  if [ -f ${old_pref_file} -a ! -f ${pref_file} ] ; then
+    mv ${old_pref_file} ${pref_file}
+  fi
   if [ -f ${pref_file} ] ; then
     verbose "Loading saved skel preferences from ${pref_file}"
-    source ${pref_file}
+    # source is a bashism
+    . ${pref_file}
   fi
 }
 
-function save_prefs {
-  (( $SAVE )) || return 0
-  local pref_file=${BASEDIR}/installed-prefs
-  (echo_pref BASEDIR 
+save_prefs() {
+  test $SAVE = 1 || return 0
+  local pref_file=${BASEDIR}/.installed-prefs
+  (echo_pref BASEDIR
    echo_pref MINIMAL
    echo_pref INSTALL_KEYS
    echo_pref TRUST_ALL_KEYS
@@ -231,12 +300,16 @@ function save_prefs {
    echo_pref VERBOSE) > $pref_file
 }
 
-function echo_pref {
-  echo "$1=\${$1:-${!1}}"
+echo_pref() {
+  eval "local val=\${$1}"
+  echo "$1=\${$1:-${val}}"
 }
 
-function cleanup {
+cleanup() {
   # Needs zsh
+  if ! test -x /usr/bin/zsh ; then
+    return 0
+  fi
   /usr/bin/zsh >/dev/null 2>&1 <<EOF
   source ${BASEDIR}/dotfiles/zshrc.d/prune-broken-symlinks.zsh
   prune-broken-symlinks -y ${HOME}/.zshrc.d
@@ -244,14 +317,48 @@ function cleanup {
 EOF
 }
 
-function verbose {
-  (( ${VERBOSE:-0} )) && echo "$@" >&2
+verbose() {
+  test ${VERBOSE:-0} = 1 && echo "$@" >&2 || return 0
+}
+
+# Operations
+
+install_dotfiles() {
+  install_dotfile_dir "${BASEDIR}/dotfiles"
+  test -d "${BASEDIR}/private_dotfiles" && \
+    test -d "${BASEDIR}/.git/git-crypt" && \
+    install_dotfile_dir "${BASEDIR}/private_dotfiles" || \
+    true
+  test -d "${BASEDIR}/local_dotfiles" && \
+    install_dotfile_dir "${BASEDIR}/local_dotfiles" || \
+    true
+}
+
+install_main() {
+  test $MINIMAL = 1 || command -v git >/dev/null 2>&1 && \
+    git -C ${BASEDIR} submodule update --init --recursive
+  test $MINIMAL = 1 || prerequisites
+  test $INSTALL_PKGS = 1 && is_deb_system && install_apt_pkgs
+  install_dotfiles
+  install_basic_dir "${BASEDIR}/bin" "${HOME}/bin"
+  test $MINIMAL = 1 || postinstall
+  test $INSTALL_KEYS = 1 && install_keys
+  save_prefs
+  cleanup
+}
+
+install_dconf() {
+  which dconf >/dev/null 2>&1 || return 1
+  find "${BASEDIR}/dconf" -type f -printf '/%P\n' | while read dcpath ; do
+    dconf load ${dcpath}/ < "${BASEDIR}/dconf/${dcpath}"
+  done
 }
 
 # Setup variables
 read_saved_prefs
 
-# Defaults if not passed in or saved
+# Defaults if not passed in or saved.
+# TODO: use flags instead of environment variables.
 BASEDIR=${BASEDIR:-$HOME/.skel}
 MINIMAL=${MINIMAL:-0}
 INSTALL_KEYS=${INSTALL_KEYS:-1}
@@ -261,31 +368,45 @@ VERBOSE=${VERBOSE:-0}
 SAVE=${SAVE:-1}
 
 # Check prerequisites
-if [[ ! -d $BASEDIR ]] ; then
+if [ ! -d $BASEDIR ] ; then
   echo "Please install to $BASEDIR!" 1>&2
   exit 1
 fi
 
-if which dpkg-query > /dev/null ; then
-  HAVE_X=`dpkg-query -s xserver-xorg 2>/dev/null | grep -c 'Status.*installed'`
+if which dpkg-query > /dev/null 2>&1 ; then
+  HAVE_X=$(dpkg-query -s xserver-xorg 2>/dev/null | \
+    grep -c 'Status.*installed' \
+    || true)
 else
   HAVE_X=0
 fi
 
-IS_KALI=`grep -ci kali /etc/os-release 2>/dev/null`
-ARCH=`uname -m`
+IS_KALI=$(grep -ci kali /etc/os-release 2>/dev/null || true)
+ARCH=$(uname -m)
 
+OPERATION=${1:-install}
 
-(( $MINIMAL )) || prerequisites
-(( $INSTALL_PKGS )) && is_deb_system && install_apt_pkgs
-install_dotfile_dir "${BASEDIR}/dotfiles"
-test -d "${BASEDIR}/private_dotfiles" && \
-  test -d "${BASEDIR}/.git/git-crypt" && \
-  install_dotfile_dir "${BASEDIR}/private_dotfiles"
-test -d "${BASEDIR}/local_dotfiles" && \
-  install_dotfile_dir "${BASEDIR}/local_dotfiles"
-install_basic_dir "${BASEDIR}/bin" "${HOME}/bin"
-(( $MINIMAL )) || postinstall
-(( $INSTALL_KEYS )) && install_keys
-save_prefs
-cleanup
+case $OPERATION in
+  install)
+    install_main
+    ;;
+  dotfiles)
+    install_dotfiles
+    ;;
+  package*)
+    PKG_SET=${2:-minimal}
+    install_pkg_set packages.${PKG_SET}
+    ;;
+  test)
+    # Do nothing, just sourcing
+    set +o errexit
+    ;;
+  dconf)
+    # Load dconf
+    install_dconf
+    ;;
+  *)
+    echo "Unknown operation $OPERATION." >/dev/stderr
+    exit 1
+    ;;
+esac

keys/gpg/dwt-google.pub

@@ -0,0 +1,52 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+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+=amL+
+-----END PGP PUBLIC KEY BLOCK-----

keys/ssh/5dea789b_subkey.pub

@@ -0,0 +1 @@
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQDYQOAB5bJ9DjMXyY67GEI99kK1LG8XF+cWJ4md52rPnOeJd0da7l26bn9NtXCma6DP5gZQArfxHsPh7I4SbYJRYxTCCCE/Jsd8mLB22DcoeY+MqPA2g71j3KrYsvuJC++9GHK2Xc7ZRmhAugEmC/NAdtORBVhtBSAUgyCmUczKHoCAqHmq8j54En8kRYjbvlHPpDsNoRuhcH5uDGBIVkbV7UtBl2oUlRNVw7grs6XS7cPU2zCQSxcrRRuAfV4hmGG2eKaPpieNg0MAAbR0G5ssWW3IuYwd1ys5wA0YQuWUhxadUuYc46/cqyyoVIFlfjxCVTX+2w3900SDPOF/YrOwctAb23+78WN6GPnAmmS3zcmXTGsJiw/mmyBlqYI/JdSgrgI+COlcP0rlF/uklzEywfD91m1lno1u2IApdAumZWHR8aFnpHQXfI6rWc1o/V+RBpz5Xe6D2h9CPT3AE303BV09HGmidb0t6bCKoabTDwvE+KojIcbKBji6g8V6KTM=

keys/ssh/id_ecdsa_chromebook.pub

@@ -0,0 +1 @@
+ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBIsFYLEsalNh/l6PtMZhi0f/eZ22uoMw/xYpgPy6vBU6OlpN2FjW7R0pwX29fZjjVQoF0eEG0K/9/CcYcnxtspw= chronos@localhost